|
|
|
|
Thread Tools | Display Modes |
01-02-2004, 05:49 AM | #1 |
Scooby Guru
Member#: 25516
Join Date: Oct 2002
Chapter/Region:
NWIC
Location: Send help, stuck in internet!
|
would it be bad to cap the PCV?
ok, well some of my parts broke off on my ej22T and i dont have time to wait for them to get here. I was thinking of just caping the PCV, and then putting a breather on the crank case plug. would this harm anything? would it be best to just wait for my parts?
thanks dustin
* Registered users of the site do not see these ads.
|
01-02-2004, 03:51 PM | #2 |
Scooby Specialist
Member#: 42145
Join Date: Aug 2003
Location: cruizin' down the street in my
Vehicle:6-4 jockin da bish- es and slappin the hoes. |
it shouldn't, as long as you put the breather like you said, just make sure that the pcv doesn't leak. if you can wait than i would do that, 'cause it's real easy to screw up a motor versus fixing it
|
01-02-2004, 07:15 PM | #3 |
Scooby Guru
Member#: 177
Join Date: Aug 1999
Chapter/Region:
NWIC
Location: Austin, Texas, USA
Vehicle:The 93 W/EJ20K-sold Subaru-less :( |
um yes bad ..
ask austin you will have positive pressure in the crank case.. and the oil in your turbo won't drain |
01-02-2004, 08:11 PM | #4 |
Scooby Guru
Member#: 25516
Join Date: Oct 2002
Chapter/Region:
NWIC
Location: Send help, stuck in internet!
|
ordered the parts, should be here soon. I will just go the oem way.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Would it be safe to turn the car on and move the wheels while on jack stands? | Dragonbreak | Newbies & FAQs | 13 | 08-17-2007 03:33 AM |
Would it be bad.... | de Rookie | Off-Topic | 3 | 09-21-2005 12:34 PM |
would it be BAD to... | AdmireWantWillLove | Tire & Wheel | 8 | 07-25-2003 09:22 AM |
would it be possible to swap the roof on a 2000 GC8? | Chris Lawson | General Community | 12 | 01-29-2003 10:11 AM |
Would it be bad (presumptuous) if I... | KC | New England Impreza Club Forum -- NESIC | 9 | 11-30-2001 01:49 PM |