|
|
|
|
Thread Tools | Display Modes |
03-10-2013, 10:05 PM | #1 |
Scooby Newbie
Member#: 298633
Join Date: Oct 2011
|
Assistance with cusco engine and trasmission mount install
I purchased a set of Cusco engine and trasmission mounts and attempted to install them. I was able to get one side of the engine mounts in but the other was giving me a real problem. I put the stock mounts back on and was going to have them installed at a shop. I found out they were going to charge almost as much as the kit. I was looking to see if anyone has installed these and could either assist me or I could pay you a reasonable fee to install these for me. I live in Silver Spring Maryland. If anyone lives close and could help. Please message me. Thanks in advance.
* Registered users of the site do not see these ads.
|
03-15-2013, 10:15 AM | #2 |
Scooby Newbie
Member#: 298633
Join Date: Oct 2011
|
anyone
bump really wanna get these installed
|
03-15-2013, 02:02 PM | #3 |
Scooby Guru
Member#: 22825
Join Date: Aug 2002
Chapter/Region:
NWIC
Location: Seattle, WA
|
What was the problem exactly that stopped you?
And we do have local regional specific forums you know. If you need local help, ask there. |
03-15-2013, 03:27 PM | #4 |
Scooby Guru
Member#: 4414
Join Date: Feb 2001
Location: Dublin, CA
Vehicle:2002 WRX Sedan Midnight Black |
The passenger side engine mount is a real pain to get off. Not much room in there. You just gotta do what you can to get leverage on it. Lift the engine and tranny up as high as you can and push / pull until it comes off.
Driver's side engine and the tranny mount are both easy. I doubt it was those you had issue with. |
Thread Tools | |
Display Modes | |
|
|