|
Mid Atlantic Impreza Club Forum sponsored by Annapolis Subaru |
|
|
|
Thread Tools | Display Modes |
12-31-2006, 02:49 PM | #1 |
Hoodbridge!
Moderator Member#: 560
Join Date: Nov 1999
Chapter/Region:
MAIC
Location: Woodbridge, VA
Vehicle:2006 STi, 16 Outback Crystal Gray, Silver |
Need a couple of bolts for my STI seats. Have them? Where to get them? Part number?
So Ross came over to help me ut the stock STI seats back into the car for the winter. Got the Sparcos out no problem. When we went to put in the stock seats Ross noticed that the bolts for the seat belt receivers were missing, and they weren't used on the Sparcos. Hmmmm....I remember seeing them in the cup holder after I had the Sparcos installed, but I can NOT find them now. Turns out they're some weird size that aren't at Home Depot or Lowes. As far as I can tell, they're M11x1.25. Of course M10x1.25 and M12x1.25 are pretty easy to get. Anyway, does anyone happen to have aftermarket seats and have these bolts available? Know any place around that might carry them? Maybe a part number so I can order them? Below are pics of the location/hole Where these bolts go on the seat. Thanks.
* Registered users of the site do not see these ads.
|
12-31-2006, 03:02 PM | #2 |
Scooby Guru
Member#: 18823
Join Date: May 2002
Chapter/Region:
MAIC
Location: In my car
Vehicle:2011 with 4 wheels monochrome? |
Subarupartsgirl can get them for you.
|
12-31-2006, 03:49 PM | #3 |
Scooby Specialist
Member#: 2394
Join Date: Sep 2000
Chapter/Region:
MAIC
Location: Bel Air Md.
Vehicle:2005 Legacy GT wagon 2009 Forester X |
Agreed,,or maybe a dealer near you.
|
12-31-2006, 06:37 PM | #4 |
Hoodbridge!
Moderator Member#: 560
Join Date: Nov 1999
Chapter/Region:
MAIC
Location: Woodbridge, VA
Vehicle:2006 STi, 16 Outback Crystal Gray, Silver |
Yeah. I think it's something I'm going to have to order. Have messages in to Jackie, and all the local dealer's parts departments.
|
01-01-2007, 10:31 AM | #5 |
Hoodbridge!
Moderator Member#: 560
Join Date: Nov 1999
Chapter/Region:
MAIC
Location: Woodbridge, VA
Vehicle:2006 STi, 16 Outback Crystal Gray, Silver |
So no one has aftermarket seats and these bolts available? I'll buy them and/or replace them when I get new ones.
|
01-01-2007, 08:08 PM | #6 |
Scooby Guru
Member#: 7327
Join Date: Jun 2001
Chapter/Region:
NWIC
Location: Seattle, WA
Vehicle:2008 Mazdaspeed3 2006 Wrangler Sport |
The bolts are not a typical size/pitch. I know this the hard way. Also, I can't find the bolt as a separate item in the parts lookup tool.
Just the whole latch/sensor/bolt assembly: 64630FE070ML $43.88/ea at subarugenuineparts I believe it is an M13 bolt though... extremely uncommon size, not to mention the fact that it has that little 'step' in the bolt for the latch to pivot on and the wave washer to keep the latch from wobbling while still being free to pivot. |
01-01-2007, 08:13 PM | #7 |
Scooby Guru
Member#: 36838
Join Date: May 2003
Chapter/Region:
MAIC
Location: Reston VA
Vehicle:2001 B50 RSTi Sedan 2011 DGM WRX hatch |
I'll be by to pick up the sparco's later this week.
-- Dave |
01-01-2007, 11:19 PM | #8 |
Scooby Newbie
Member#: 27541
Join Date: Oct 2002
Chapter/Region:
MAIC
Location: Oakton, VA
Vehicle:0000 Pickup truck & Mountain Bikes |
I might have some, but not 100% sure. Let me look in my bucket o' subaru bolts tomorrow after work.
-Tom |
01-02-2007, 12:03 AM | #9 |
Scooby Guru
Member#: 113734
Join Date: Apr 2006
Chapter/Region:
South East
Location: Charleston SC
Vehicle:2023 FL5 Type R Subaruless |
well I took apart my interior an put everything in a bag which has disappear'd some how so everything that snap'd back in is in place but all the plastic snaps and bolts are missing so no support on the back seats and the bottom part is just kinda sittin there
|
01-02-2007, 06:45 AM | #10 | |
Hoodbridge!
Moderator Member#: 560
Join Date: Nov 1999
Chapter/Region:
MAIC
Location: Woodbridge, VA
Vehicle:2006 STi, 16 Outback Crystal Gray, Silver |
Quote:
Oh, and I am pretty sure it's an M11. The M10 was too small, and the M12 was too big. Last edited by mav1c; 01-02-2007 at 07:11 AM. |
|
01-02-2007, 06:48 AM | #11 |
Scooby Guru
Member#: 7327
Join Date: Jun 2001
Chapter/Region:
NWIC
Location: Seattle, WA
Vehicle:2008 Mazdaspeed3 2006 Wrangler Sport |
okay yeah... i knew it was something "in between" - been awhile since i tried.
There is actually an SAE size that threads in pretty well, which is what we used temporarily last time I ran into this problem with a friend. I forget the size though. Don't take my word as final on the bolt not being available seperately... try contacting Subie Gal and see if she has the real skinny. |
01-02-2007, 09:03 AM | #12 |
*** Banned ***
Member#: 104944
Join Date: Jan 2006
Location: a barn on white clay creek
|
I have 1. I will put in an envelope and mail it to you if you still need it.
Let me know. I don't have 2, sorry. |
01-02-2007, 01:50 PM | #13 |
Hoodbridge!
Moderator Member#: 560
Join Date: Nov 1999
Chapter/Region:
MAIC
Location: Woodbridge, VA
Vehicle:2006 STi, 16 Outback Crystal Gray, Silver |
Thanks for the offer. I did get a PM from someone that says he has a few, and just waiting on a reply. If that falls through I mnight just take that bolt. At least I could do the driver's side.
|
01-02-2007, 01:53 PM | #14 |
Hoodbridge!
Moderator Member#: 560
Join Date: Nov 1999
Chapter/Region:
MAIC
Location: Woodbridge, VA
Vehicle:2006 STi, 16 Outback Crystal Gray, Silver |
If I don't get any by this weekend I'll start scourng the junkyards. I would think the bolt is probably the same for many different models.
|
01-03-2007, 06:55 PM | #15 |
Hoodbridge!
Moderator Member#: 560
Join Date: Nov 1999
Chapter/Region:
MAIC
Location: Woodbridge, VA
Vehicle:2006 STi, 16 Outback Crystal Gray, Silver |
Tom (mechman900) came through with a couple bolts that work, so I'm golden.
Thanks Tom! I owe ya! |
01-03-2007, 06:59 PM | #16 |
Scooby Guru
Member#: 36838
Join Date: May 2003
Chapter/Region:
MAIC
Location: Reston VA
Vehicle:2001 B50 RSTi Sedan 2011 DGM WRX hatch |
So when can I come by and pick up the Sparco's?
I'm free most nights this week. -- Dave |
01-03-2007, 07:29 PM | #17 |
Scooby Newbie
Member#: 27541
Join Date: Oct 2002
Chapter/Region:
MAIC
Location: Oakton, VA
Vehicle:0000 Pickup truck & Mountain Bikes |
Glad to hear they worked out OK. If anyone else needs any funky (or regular) bolts I have a huge bin. Mostly engine stuff, some general purpose stuff as well.
-Tom |
01-03-2007, 07:37 PM | #18 |
Scooby Guru
Member#: 36838
Join Date: May 2003
Chapter/Region:
MAIC
Location: Reston VA
Vehicle:2001 B50 RSTi Sedan 2011 DGM WRX hatch |
I need a stock downpipe to transmission bolt =)
Probably some standard 12mm head subaru size. I dunno, this is my first down-pipe. -- Dave |
01-03-2007, 07:39 PM | #19 |
Scooby Guru
Member#: 7327
Join Date: Jun 2001
Chapter/Region:
NWIC
Location: Seattle, WA
Vehicle:2008 Mazdaspeed3 2006 Wrangler Sport |
Dave, it's a M10x1.25 with a 14mm head. Those bolts also have the unthreaded 'starter' portion at the end of the bolt to aid in aligning the threads upon initial insertion.
|
01-03-2007, 08:20 PM | #20 |
Hoodbridge!
Moderator Member#: 560
Join Date: Nov 1999
Chapter/Region:
MAIC
Location: Woodbridge, VA
Vehicle:2006 STi, 16 Outback Crystal Gray, Silver |
|
01-03-2007, 08:21 PM | #21 |
Hoodbridge!
Moderator Member#: 560
Join Date: Nov 1999
Chapter/Region:
MAIC
Location: Woodbridge, VA
Vehicle:2006 STi, 16 Outback Crystal Gray, Silver |
Yeah, thanks again. When I first got them I didn't think they'd work, but they fit perfectly. Nice! You rock with you're magical bolts bin.
Last edited by mav1c; 01-03-2007 at 09:30 PM. |
01-03-2007, 09:25 PM | #22 | |
Scooby Guru
Member#: 36838
Join Date: May 2003
Chapter/Region:
MAIC
Location: Reston VA
Vehicle:2001 B50 RSTi Sedan 2011 DGM WRX hatch |
Quote:
I always thought I wanted something that could recline, but then if I had a harness bar or a cage, I really couldn't recline anyways...so testing something in my car would be nice. -- Dave |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS : MA: BO: 2006 STi seats - front and rear | btweedd | Interior/Dressup/Audio & Security | 5 | 06-08-2010 10:50 AM |
I'm too sexy for my job aka I'm rich bish | eclone | Off-Topic | 15 | 06-03-2010 07:42 PM |
Where to get stoptech pads locally? | OCrex | Southern California Impreza Club Forum -- SCIC | 6 | 06-03-2010 07:34 PM |
Need wiring diagram for 04 sti ocv solenoid | sti3573 | Factory 2.5L Turbo Powertrain (EJ Series Factory 2.5L Turbo) | 1 | 06-03-2010 04:59 PM |
FS : MA: BO: 2006 STi seats - front and rear | btweedd | Wheels/Tires | 0 | 06-03-2010 04:32 PM |