|
|
|
|
Thread Tools | Display Modes |
03-09-2015, 12:28 AM | #1 |
Scooby Newbie
Member#: 415298
Join Date: Mar 2015
|
2006 STi Cobb Stage 2 not making enough boost? HELP
So I have a 2006 STi with a Catless Downpipe, Cobb intake and Accessport V3. At any given time I'm only maxing out at 12PSI of boost. Just replaced the OEM inlet not too long ago and I did the timing belt. My question is what would cause something like this? And its a hard hit, like I hit 12psi and stop. Wastegate is at 85%, dont have any boost leaks that I know of. Any ideas? Thanks!
* Registered users of the site do not see these ads.
|
03-09-2015, 10:31 AM | #2 |
Medium Frank
Moderator Member#: 140114
Join Date: Feb 2007
Chapter/Region:
MAIC
Location: Common Sense, VA
Vehicle:2020 Subaru Outback |
Have you actually checked for boost leaks?
|
03-09-2015, 10:50 AM | #3 |
Scooby Newbie
Member#: 349901
Join Date: Mar 2013
Chapter/Region:
SWIC
Location: NM
Vehicle:2006 Subaru STi SGM |
Any Cels, is your DAM value 1? Would also check for boost leaks.
|
03-09-2015, 05:34 PM | #4 |
Scooby Newbie
Member#: 397348
Join Date: Jul 2014
Chapter/Region:
MAIC
Location: Suffolk, Va
Vehicle:2011 WRX, JDM 6MT Dark Gray Metallic |
thats the exact boost i was pushing when my vac line came off my intake that connects to the top of the BPV, it tends to blow off pretty easy in higher boost applications. i ended up using a zip tie to hold it in place
|
Thread Tools | |
Display Modes | |
|
|