|
|
|
|
Thread Tools | Display Modes |
03-13-2013, 04:23 PM | #1 |
Scooby Specialist
Member#: 268770
Join Date: Dec 2010
Chapter/Region:
NWIC
Location: Oregon City
Vehicle:2006 WRX TR White |
Flywheel Dowel pins, Where do I find them?
ok so I have a STi Pull type flywheel with a broken and a bent pin. I need to find a new set of the pins so that I can install a new clutch and get my motor back in. So far I have only seen threads (nasioc and google search) about people buying the pins but not where.
I have called Subaru and they told me they only come with a new flywheel. So I tryed the local machine shops and they cant get them either. I have seen very mixed reviews on if you even need the pins or not but I would like to keep them. If you have any I will buy them off of you or if you could please direct me to a place that dose sell them I would appreciate it. Thanks in advance, Matt
* Registered users of the site do not see these ads.
|
03-14-2013, 05:49 PM | #2 |
Scooby Specialist
Member#: 268770
Join Date: Dec 2010
Chapter/Region:
NWIC
Location: Oregon City
Vehicle:2006 WRX TR White |
bump anyone?
|
03-16-2013, 03:49 PM | #3 |
Scooby Specialist
Member#: 112612
Join Date: Apr 2006
Chapter/Region:
MWSOC
Location: Appleton,Wisconsin
Vehicle:2010 Legacy 2.5 CBS 2002 Impreza WRX WRB |
Measure the diameter with a micrometer and go to Fastenal or a local good hardware store that sells ground straight pin stock, dowels pins. Cut to length and install. I would also recommend installing the new cut dowel pin with some Loctite 609 sleeve retaining compound. Read the instrustions on the bottle too. DO NOT USE KNOCK OFF SLEEVE RETAINER!!! Loctite all the way!!!
|
03-17-2013, 09:58 AM | #4 |
Scooby Newbie
Member#: 349008
Join Date: Mar 2013
|
Fastenal will more than likely have what you need I replaced mine the same way and they had what I needed in stock
|
03-29-2013, 05:47 PM | #5 |
Scooby Specialist
Member#: 268770
Join Date: Dec 2010
Chapter/Region:
NWIC
Location: Oregon City
Vehicle:2006 WRX TR White |
ok so after looking around and my clutch not fitting even after I removed the pins I noticed that the pins on this arent the same as the new flywheel I just bought. For some reason the new one has just a regular pin and the old one had a pin that had a wider bottom then the part that stuck out of the flywheel.
|
03-30-2013, 08:24 AM | #6 |
Scooby Guru
Member#: 103232
Join Date: Dec 2005
Chapter/Region:
Tri-State
Location: GTX3576R 05GD, GTX3076R'd FXT
Vehicle:GTX 3071R'd 11WRX PPG,4.44,LSD,E85,6spdx3 |
I got mine from Competition Clutches...
Go to competitionclutches.com. give them a call and tell them what you need. they cost me like 1 or 2 bucks each... |
Thread Tools | |
Display Modes | |
|
|