|
|
|
|
Thread Tools | Display Modes |
09-01-2010, 04:21 PM | #1 |
Scooby Specialist
Member#: 100449
Join Date: Nov 2005
Chapter/Region:
SCIC
Location: NoHo
Vehicle:'04 WRX 307whp278tq 03WRX wgn, '72 MGB |
What type of steel to use for a custom subframe?
Just wondering what type of steel to use for a subframe? What diameter and thickness of steel tube is recommended?
Oh and if anyone has pics of their subframe to share, feel free to post them here.
* Registered users of the site do not see these ads.
|
09-23-2010, 06:56 PM | #2 |
Scooby Specialist
Member#: 206720
Join Date: Mar 2009
Chapter/Region:
SWIC
Location: Albuquerque NM
Vehicle:2002 WRX Wagon Silver |
I'll bump this for you hoping to maybe get a response from someone who knows.
|
09-23-2010, 07:43 PM | #3 |
Scooby Specialist
Member#: 5810
Join Date: Apr 2001
Chapter/Region:
Tri-State
Location: Easton PA
Vehicle:2001 S366 2.5RS |
Just a guess. But I would use 1" Dom steel such as roll bar material
|
09-23-2010, 08:23 PM | #4 |
Scooby Newbie
Member#: 142017
Join Date: Feb 2007
|
I guess it would depend on what you want to do.
If its for full on gravel racing events then you would want to use a heavier wall thickness. Tarmac could me made lighter,road so on. Commonly chrome moly is used in about 1" Dont know about the wall thickness. I would think a seamless tube would be the go. I have heard of cold drawn and hot but I dont know what the properties are. Maybe google roll cages and suspension parts for some clues as to what steel they use. |
09-24-2010, 03:58 AM | #5 |
Scooby Newbie
Member#: 174965
Join Date: Mar 2008
Chapter/Region:
MAIC
Location: Annapolis, Maryland
Vehicle:07 WRX VF43 OBP |
I would personally suggest aluminum (maybe thats because I work at an aluminum fab plant). It is considerably lighter, and you won't be seeing any temps that could make it bend.
Then this is all assuming that you weld aluminum, I would suggest taking your time with a nice tig for something like this. Because aluminum is lighter you could can get pretty thick side walls. I made a wakeboard tower out of 2" OD 1/8" wall tube and it towed two boarders and some people on it at the same time. I know this doesn't apply too much to your situation, but I am just saying that it will definitely be strong enough. For your situation you could go with something like .75" or 1" outer diameter. Here is a good site:http://www.onlinemetals.com/merchant.cfm?step=2&id=71 I would suggest drawing or modeling the piece you are going to make before purchasing any material. If you have dimensions I can see if I can make a piece and hopefully even stress test it (this is what I do as my job in the summers). Last edited by boardinshorty81; 09-24-2010 at 04:08 AM. |
09-24-2010, 01:05 PM | #6 |
Scooby Specialist
Member#: 206720
Join Date: Mar 2009
Chapter/Region:
SWIC
Location: Albuquerque NM
Vehicle:2002 WRX Wagon Silver |
Thanks for the help.
I am going to be making a solar car at school and I need to learn how to weld aluminum. I figured I might as well try and make some sub-frame braces while I have a bunch of cool tools to use. |
09-24-2010, 02:16 PM | #7 | |
Scooby Newbie
Member#: 174965
Join Date: Mar 2008
Chapter/Region:
MAIC
Location: Annapolis, Maryland
Vehicle:07 WRX VF43 OBP |
Quote:
I love college, there are plenty of free ways to get experience in groups and such. |
|
09-24-2010, 05:35 PM | #8 | |
Scooby Specialist
Member#: 206720
Join Date: Mar 2009
Chapter/Region:
SWIC
Location: Albuquerque NM
Vehicle:2002 WRX Wagon Silver |
Quote:
Totally agree. Sometimes I get annoyed working with computer geeks though. EE is filled with these total nerds. Smart as hell but not very good with their hands. This will be my first venture into the welding world. |
|
09-25-2010, 04:00 AM | #9 | |
Scooby Newbie
Member#: 174965
Join Date: Mar 2008
Chapter/Region:
MAIC
Location: Annapolis, Maryland
Vehicle:07 WRX VF43 OBP |
Quote:
Where are you intending on having the support mount under the car? |
|
09-25-2010, 10:55 AM | #10 |
Scooby Specialist
Member#: 206720
Join Date: Mar 2009
Chapter/Region:
SWIC
Location: Albuquerque NM
Vehicle:2002 WRX Wagon Silver |
Well I was thinking about making some fender cowl braces. Maybe some rear subframe bracing as well. In my wagon I get a lot of looseness on the rear tires. Welding aluminum does not look that easy. So maybe my dreams overstepped reality again.
I am attending UNM. What school are you attending bordinshorty81? |
09-26-2010, 01:44 AM | #11 | |
Scooby Newbie
Member#: 174965
Join Date: Mar 2008
Chapter/Region:
MAIC
Location: Annapolis, Maryland
Vehicle:07 WRX VF43 OBP |
Quote:
|
|
09-26-2010, 01:49 AM | #12 |
Scooby Specialist
Member#: 100449
Join Date: Nov 2005
Chapter/Region:
SCIC
Location: NoHo
Vehicle:'04 WRX 307whp278tq 03WRX wgn, '72 MGB |
So aluminum is the metal to use for a subframe? If I do a subframe I won't be fabricating it myself, I have zero metal working skills. What would be wrong with using steel, it would be cheaper, and even though there would be a weight penalty it would at the lowest point on the car, if it ways less than the stock subframe you still save weight, if it weighs more than you are lowering the center of gravity on the car.
|
09-27-2010, 09:42 AM | #13 |
Scooby Specialist
Member#: 206851
Join Date: Mar 2009
Chapter/Region:
MWSOC
Vehicle:56 Belair Pro Street |
how has 4130 not been mentioned? I would't bet Al for a rear subframe
|
09-27-2010, 12:18 PM | #14 | |
Scooby Newbie
Member#: 174965
Join Date: Mar 2008
Chapter/Region:
MAIC
Location: Annapolis, Maryland
Vehicle:07 WRX VF43 OBP |
Quote:
I just despise of steel because of it's weight, that does not mean it isn't right for your application. I would wait for someone with some experience making a brace to chime in with the magnitude of loads you will be looking at. |
|
09-27-2010, 01:15 PM | #15 |
Scooby Specialist
Member#: 245851
Join Date: May 2010
Chapter/Region:
MWSOC
Location: Fairfield Township(Cincinnati)
Vehicle:2004 WRX Rally car |
Easy one: 4130 aka chrome-moly aka t45. It is what all race car roll cages and subframes are made out of. It has an infinite fatigue life (unlike aluminum) if properly designed and can be made nearly as lightweight as aluminum. Look up MSI's subframes. Common diameters are .75"-1.5" and wall thicknesses of 0.049"-0.095".
Last edited by bigusnickus; 09-27-2010 at 01:18 PM. Reason: gave wall thickness and diameters |
10-02-2010, 02:23 PM | #16 |
Scooby Newbie
Member#: 190627
Join Date: Oct 2008
|
|
10-02-2010, 02:26 PM | #17 | |
Scooby Newbie
Member#: 190627
Join Date: Oct 2008
|
Quote:
|
|
10-04-2010, 06:39 PM | #18 | |
Scooby Specialist
Member#: 245851
Join Date: May 2010
Chapter/Region:
MWSOC
Location: Fairfield Township(Cincinnati)
Vehicle:2004 WRX Rally car |
Quote:
4130 is DOM. The least expenisve DOM grade is a plain carbon steel such as ASTM 1018 or 1020, which would also work exceptionally well in this application. I guess I am just used to 4130 because you can realize a weight savings over plain carbon by decreasing the wall thickness due to the higher strength of the material. Either way, steel tubing would be your best choice, preferrably a DOM or seamless tube. |
|
10-04-2010, 07:28 PM | #19 |
Scooby Specialist
Member#: 48377
Join Date: Nov 2003
Chapter/Region:
MWSOC
Location: "They eat fish soaked in lye"
Vehicle:1996 Gutted, built XP class Impreza L |
I would not use aluminum in this application without a post-weld heat treatment.
T-0 aluminum is pretty much junk. It looks nice and won't corrode, but it will be much heavier than steel for the same structure if both are well designed. 6061 T-651 aluminum would be a great material for a subframe, lighter and stronger than steel. Stiffness is all in the design and could be made equal with either material. If you do use aluminum, take care to make sure your bolt hole surfaces are thick enough to handle the impact forces they will be seeing without ovalizing. I would use 4130 steel myself. |
11-07-2010, 12:00 PM | #20 | |
Scooby Specialist
Member#: 147598
Join Date: Apr 2007
Location: Colchester, VT
Vehicle:95 Impreza 2dr Black |
Just to clear things up, 4130 is NOT T45. 4130 is not accepted by may sancioning bodies due to how brittle it gets in the HAZ.. The only way to solve that problem is to normalize the material. Since there is really no way to prove the joints have been normalized. You cannot use it.
T45 is Carbon Manganese Steel. You cant even buy it in the US and the only place that I have seen it being used is in FIA Homoligated roll cages. AKA Custom Cages UK. Its got around the same tensile strength as 4130 but its properties dont change with heat.. meaning you can even MIG weld it.. Save some money and make your subframes out of DOM 1020. Use 1" x .080". Design it well. Quote:
|
|
11-07-2010, 02:06 PM | #21 | |
Scooby Specialist
Member#: 48377
Join Date: Nov 2003
Chapter/Region:
MWSOC
Location: "They eat fish soaked in lye"
Vehicle:1996 Gutted, built XP class Impreza L |
Quote:
I'll probably still go with 4130 for my stuff, but will more seriously consider 1020 as a good option. |
|
11-07-2010, 03:23 PM | #22 |
Scooby Specialist
Member#: 48377
Join Date: Nov 2003
Chapter/Region:
MWSOC
Location: "They eat fish soaked in lye"
Vehicle:1996 Gutted, built XP class Impreza L |
Double post
|
11-11-2010, 01:25 AM | #23 | |
Scooby Newbie
Member#: 218087
Join Date: Jul 2009
Chapter/Region:
VIC
Location: Burnaby
Vehicle:95 Legacy That ugly 'spruce' green. |
Quote:
Tensile strength is only 45000 psi. Mild steel starts in the 60000 psi range. You may be thinking of 7075-T6. 83000 psi tensile strength. But it is not considered to be weldable. |
|
11-13-2010, 01:28 AM | #24 | |
Scooby Specialist
Member#: 48377
Join Date: Nov 2003
Chapter/Region:
MWSOC
Location: "They eat fish soaked in lye"
Vehicle:1996 Gutted, built XP class Impreza L |
Quote:
What I meant was that it has a better strength to weight ratio, and I worded it poorly. |
|
11-14-2010, 11:47 PM | #25 |
Scooby Guru
Member#: 67004
Join Date: Jul 2004
Chapter/Region:
SCIC
Location: (818) 300k+ ej205 ppg 5mt
Vehicle:02 vf30 pnp wagon silver and cf |
Hey Justin just saw this. I know what your plaining. So my suggestion is go with the 4130. Mine has a dent in the tubing where I hit something pretty hard. Aluminum wouldn't take as much punishment I would think, but depends on the grade. I have some other idea's if you want to chat some more. Maybe I will have the idea's added to my own.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
What Type of Sealent To Use for Headlights? (specific Brand?) | WoopWoopSti | Interior & Exterior Modification | 10 | 08-14-2007 03:40 AM |
What kind of oil to use for the winter season? | affinity1 | Mid West Subaru Owners Club Forum -- MWSOC | 10 | 09-14-2006 12:42 PM |
What type of oil to use on high mileage car? | txl146 | Service & Maintenance | 5 | 02-04-2005 11:01 AM |
Best Brand/Type of Paint to use for the car? | Costas | Interior & Exterior Modification | 14 | 02-23-2003 07:32 PM |
What kind of paint to use for your interior | Ripper | Interior & Exterior Modification | 3 | 07-01-2001 10:07 PM |