|
|
|
|
Thread Tools | Display Modes |
03-09-2011, 01:32 PM | #1 |
Scooby Newbie
Member#: 134923
Join Date: Dec 2006
Location: Corvallis, OR, PNW
Vehicle:1989 GL w/96 EJ22 |
No Fuel Return Line? '06 Forrester 2.5 intake
Hey all.
Background: Car is a 90 Legacy. Currently running a 99 2.5 using original EJ22 harness, TB, and ECU. Had problems with the engine in piston #4, possibly due to bad injector. Knocks badly now. Now, these particular injectors are different than any other Phase II injectors we can find. So we are going to use the intake/injectors from the 2006 2.5 we just purchased. (we will also have to swap the heads out for Non-AVLS heads) We're putting the EJ22 throttle body on it, along with the EJ22 harness and solenoid. EGR will be blocked off. No IAC. The major problem we are facing is that the '06 intake has no return line for the fuel. It's as if the Pump just deadheads against the regulators. Is this correct? My question to the Nasioc Community, is will the pump in the legacy suffer if we don't have a return line? Any input from those running this newer fuel rail setup in an older car is greatly appreciated. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Fuel smell from the APS inlet supplied fuel return line??? | TurboQueef | Factory 2.5L Turbo Powertrain (EJ Series Factory 2.5L Turbo) | 2 | 04-28-2008 05:45 AM |
fuel in / fuel return line on sti | DJSuperSoul | Factory 2.5L Turbo Powertrain (EJ Series Factory 2.5L Turbo) | 3 | 12-03-2007 09:36 AM |
What is this in my fuel return line, and why is it there...argg | munkis | Normally Aspirated with bolt-on Forced Induction Powertrain | 5 | 07-19-2004 07:21 PM |
Fuel return line? | AK'S REX | Factory 2.0L Turbo Powertrain (EJ Series Factory 2.0L Turbo) | 0 | 03-08-2004 10:46 PM |
Shiv..Where did you tie into the fuel return line for the Bell RRFPR? | mjos | Technical Forum Archive | 6 | 05-08-2000 08:55 AM |