|
|
|
|
Thread Tools | Display Modes |
12-29-2020, 06:26 PM | #1 |
Scooby Specialist
Member#: 799
Join Date: Jan 2000
Chapter/Region:
NWIC
Location: Seattle, WA
Vehicle:2000 2.5 RS Coupe Mitsubishi EVO IX |
BI-LED Projector headlight retrofit switched ground issue
I discovered this after some sleuthing so I thought I'd author up the fix on the internet somewhere, for anyone else that might be struggling with the same issue.
The BI-LED Morimoto M LED 2.0 Stage III Projector headlight retrofit kit's controller is not directly compatible with older Japanese cars that have ground-switching high/low beam H4 wiring. The Morimoto is expecting a standard 12v switched output (meaning, the ground stays consistent, and the + switches w/ the hi/low selector). My old Subie is the opposite of that, so the second you plug in the high beam portion of the H4 to 9006F / 9006F splitter the car goes into high beam mode and will not switch back. Fortunately there's a simple fix from LumaWerx, I purchased from here: https://hidkitpros.com/shop/h49003-s...g-play-module/ Hit me up here if you have any questions (no PMs please, thnx) 2000 Subaru Impreza 2.5RS
* Registered users of the site do not see these ads.
|
12-06-2023, 12:09 PM | #2 |
Scooby Newbie
Member#: 515709
Join Date: Jun 2020
Location: Greater Seattle
Vehicle:2001 2.5RS Black |
Thank you Doug! I have the exact same problem and I will order this kit.
Sent from my SM-S908U using Tapatalk |
12-11-2023, 08:31 PM | #3 |
Scooby Specialist
Member#: 799
Join Date: Jan 2000
Chapter/Region:
NWIC
Location: Seattle, WA
Vehicle:2000 2.5 RS Coupe Mitsubishi EVO IX |
|
Thread Tools | |
Display Modes | |
|
|