|
|
|
|
Thread Tools | Display Modes |
04-06-2006, 10:31 PM | #1 |
Scooby Specialist
Member#: 92423
Join Date: Jul 2005
Chapter/Region:
MAIC
Location: chillin with Poseidon
Vehicle:2007 Honda CRV and dolphins and s**t |
engine trouble, help
ok, i have a 95 legacy l. i just did the headgaskets and now the car wont start. before i did the headgaskets, then compression was all 180's except one cylinder.
now, the car will not start- it will turn over but will not start. i checked compression again. cyl 1 & 3 are now 120's and 2&4 are 180s. this is so agrevating! anyone have any ideas? i know im getting spark and fuel. maybe i did the timing belt wrong? the haynes manual said the indents on the cam gears were to line up with the notch on the top of the rear cam covers. and the crank was to line up the arrow with the notch by the crank angle sensor. is this right?
* Registered users of the site do not see these ads.
|
04-07-2006, 01:10 AM | #2 |
Scooby Specialist
Member#: 65823
Join Date: Jul 2004
Chapter/Region:
NWIC
Location: Beaverton, OR
Vehicle:2018 Impreza Sport Pearl White |
did you count the teeth on the belt? thats what i did.. last night in fact.. i guess i'll find out tomorrow if that works.
|
04-07-2006, 02:32 AM | #3 | |
Scooby Specialist
Member#: 25952
Join Date: Oct 2002
Chapter/Region:
NWIC
Location: Under your hood :-)
Vehicle:1995 Impreza Coupe w/ "Extras" :-) |
Quote:
Don't line it up with the arrow on the crank sprocket... Line it up with the little dash on one of the teeth... You can't miss it... it's about the same as teh little mark on each of the cam gears... When the sprocket is in the correct position, I believe the arrow will point towards the drivers side. They keyway should also be pointing straight down. |
|
04-07-2006, 01:49 PM | #4 |
Scooby Specialist
Member#: 92423
Join Date: Jul 2005
Chapter/Region:
MAIC
Location: chillin with Poseidon
Vehicle:2007 Honda CRV and dolphins and s**t |
huh... thanks alot.
|
04-07-2006, 02:03 PM | #5 |
Scooby Specialist
Member#: 25952
Join Date: Oct 2002
Chapter/Region:
NWIC
Location: Under your hood :-)
Vehicle:1995 Impreza Coupe w/ "Extras" :-) |
Do you want pictures explaining what i said?
|
04-07-2006, 02:13 PM | #6 |
Scooby Guru
Member#: 5039
Join Date: Mar 2001
Chapter/Region:
South East
Location: Ocean Springs, MS
Vehicle:2007 Outback XT Grey 5-speed (sold) |
If you get the oem timing belt its marked to line up with the marks on the sprockets.
Beyond that, what wrx_driver said. ss |
04-08-2006, 11:07 AM | #7 | |
Scooby Specialist
Member#: 92423
Join Date: Jul 2005
Chapter/Region:
MAIC
Location: chillin with Poseidon
Vehicle:2007 Honda CRV and dolphins and s**t |
Quote:
|
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
check engine light, wierd engine trouble? | gipoliceman | Factory 2.0L Turbo Powertrain (EJ Series Factory 2.0L Turbo) | 6 | 05-31-2019 11:29 AM |
Engine troubles HELP! | NWSTi-wa | Factory 2.5L Turbo Powertrain (EJ Series Factory 2.5L Turbo) | 3 | 06-12-2010 08:25 PM |
HELP 2006 engine troubles | subywuby45 | Service & Maintenance | 5 | 02-21-2008 09:38 PM |
Engine Trouble Help | brianswagon | Factory 2.0L Turbo Powertrain (EJ Series Factory 2.0L Turbo) | 2 | 09-12-2006 01:40 PM |
need some subie help,engine troubles... | Vidiotgamer | Factory 2.0L Turbo Powertrain (EJ Series Factory 2.0L Turbo) | 8 | 10-29-2003 04:30 PM |