|
|
|
|
Thread Tools | Display Modes |
03-12-2024, 06:22 AM | #1 |
Scooby Specialist
Member#: 279525
Join Date: Apr 2011
Chapter/Region:
Tri-State
Location: QUEENS NY
Vehicle:06 Fxt |
06 FXT; blouch 2.5xtr, tmic; water/meth injection data logs
Hey what's up folks; my car was tuned last summer (2023). Its an 06 forester xt. 6 speed swapped. 93 oct gas. Three data logs will be posted; Idle; normal highway cruise; & WOT in 3rd gear. I felt like it broke up a little in the higher boost range.
Current mods are as follows; - Blouch Dom 2.5 xtr - AEM meth injection kit (curently tuned at 50/50 water methanol mix) - Tomei UEL headers along with invidia TBE - grimmspeed 3 bolt upipe ; Tial 44mm wastegate - Cobb ab - Perrin short ram intake (hot air intake) - ID 1050 injectors (top feeds) along w/ AN fittings, braided lines - AEM 340 fuel pump - Fuelab mini FPR (idle reads 33psi) - NGK 1 step colder plugs (gapped at .024) approx; 6k miles - New OEM coil packs - New oem crank sensor - new OEM knock sensor - KOYO radiator - 2018 STI TMIC That ^^ is pretty much all of the relevant mods ; Can you kind people here read my datalogs and pick out any items you notice i should be concerned about. I hope this helps anyone who is in the same boat as i am. Thanks in advance. Log #1 https://drive.google.com/file/d/1omp...ew?usp=sharing Log #2 https://drive.google.com/file/d/1m5z...ew?usp=sharing Log #3 https://drive.google.com/file/d/1bXX...ew?usp=sharing
* Registered users of the site do not see these ads.
|
Thread Tools | |
Display Modes | |
|
|