|
|
|
|
Thread Tools | Display Modes |
04-11-2011, 02:44 PM | #176 |
Scooby Newbie
Member#: 275378
Join Date: Feb 2011
|
I'm Having Issues with Loading my Stock Ecu Map
NEED HELP DAILY DRIVER IN NEED OF INFO!!!! lol
Alright so i have Romraider downloaded with ECU def's downloaded. I also have Logger Def's Downloaded with ECU Flash, I am driving a 2008 Subaru Legacy Gt 2.5, i connected the test wires and what seems to be a log with ecu flash. It saved as "Read Image.hex" Now i am trying to open it up in romraider but is not allowing me to, nor can i open it back up in ecuflash. I sent it to a buddy Via Mediafire and he couldnt open it in his either. Is there something like some software im missing thats not allowing me to open it or log??? i have Tactrix openport 2.0 and i have the logger def's configured into romraider. just having the issue of why cant i open my test log that i did with ecuflash this is what it showed that i logged: http://www.mediafire.com/?6xdhyhlr6ddx5sd Call me: 407-451-9981 Harley _____Or Post_____
* Registered users of the site do not see these ads.
|
07-23-2011, 03:29 PM | #177 |
Scooby Specialist
Member#: 81353
Join Date: Feb 2005
Chapter/Region:
NWIC
Location: East Wenatchee, WA
Vehicle:06 STI Blackness... |
BUMP for update with VAGCOM cable info. I think that would help a lot of ppl.
|
07-31-2011, 09:52 AM | #178 | |
Scooby Newbie
Member#: 248075
Join Date: May 2010
Chapter/Region:
MWSOC
Location: Flint, MI
Vehicle:02' WRX Wagon Aspen White |
Quote:
log files are in .csv maps are in .hex green plugs are only required to send and recieve maps |
|
05-20-2012, 01:21 AM | #179 |
Scooby Guru
Member#: 91010
Join Date: Jul 2005
Chapter/Region:
Tri-State
Location: Brooklyn, NY
Vehicle:2002 Subaru WRX OG Blueberry |
Great thread! Looking forward to take a crack at all this tomorrow.
|
08-24-2012, 09:35 PM | #180 |
Scooby Newbie
Member#: 302836
Join Date: Dec 2011
Location: Atlanta, GA
Vehicle:2006 WRX Silver |
Did it and now I truly love driving my 06 WRX wagon!
|
09-01-2012, 05:59 PM | #181 |
Scooby Newbie
Member#: 258435
Join Date: Sep 2010
Chapter/Region:
RMIC
Location: Denver, CO
Vehicle:18 STi White |
Hey guys,
Having a bit of trouble running the program. I have followed the steps very closely.. The problem I am having is everytime I open the RomRaider Logger it keeps telling me: "logger definition not configured". I have unzipped the file and resaved the .xml file to the romraider directory. I have also did the whole settings-> Logger definition location->selected the file.. But it KEEPS bringing up the window: "logger definition not configured" this is very irritating and annoying. can anyone please help?! Last edited by JDM_J03; 09-01-2012 at 11:03 PM. |
09-02-2012, 09:29 AM | #182 |
Scooby Newbie
Member#: 299861
Join Date: Nov 2011
Chapter/Region:
MAIC
Location: Hanover, PA
Vehicle:2002 Impreza WRX Metallic Silver |
Is it the "cars" file stated in the error window? Because my RomRaider says that every time i open my logger. But all the parameters are listed on the left side of the app, and it works perfectly.
|
10-29-2012, 12:47 PM | #183 | |
Scooby Specialist
Member#: 64405
Join Date: Jun 2004
Chapter/Region:
E. Canada
Location: QC, Canada
Vehicle:2018 STi WRB |
Quote:
Thanks Edit: nevermind. I thought you were saying romraider absolutely needs usb connection or something. I have a serial port on my work laptop (for older applications and stuff) so I'm all good. Last edited by frederik; 10-29-2012 at 05:10 PM. |
|
12-18-2012, 12:25 PM | #184 |
Scooby Specialist
Member#: 254133
Join Date: Aug 2010
Chapter/Region:
MAIC
Location: Lancaster, PA
Vehicle:2001 RS *EJ205* White |
I know this has probally been covered in here a million times but i just dont have time to go through the pages but is the opensource tactrix cable the only cable that works? The regular vagcom ones dont? Sorry and thanks
|
12-18-2012, 12:44 PM | #185 | |
Scooby Specialist
Member#: 274499
Join Date: Feb 2011
Chapter/Region:
NESIC
Location: RI
Vehicle:1994 5.8T Cobra 755rwhp @ 16psi |
Quote:
You don't have time to research, but you found enough of it to post this pile of crap. Good job. I'm sure someone will be along to spoon feed you shortly. #damnlazykids |
|
12-18-2012, 01:51 PM | #186 |
Scooby Specialist
Member#: 276443
Join Date: Mar 2011
Chapter/Region:
TXIC
Location: Abilene, TX
Vehicle:2005 2.1 stroker WRX OBP |
Hash tag **** is childish.
And yes you should read the whole thread. Or search key words |
12-19-2012, 10:47 AM | #187 |
Scooby Specialist
Member#: 254133
Join Date: Aug 2010
Chapter/Region:
MAIC
Location: Lancaster, PA
Vehicle:2001 RS *EJ205* White |
I was at work but read through and found out thanks for your "lame" help though.
|
12-19-2012, 11:00 AM | #188 |
Scooby Newbie
Member#: 313772
Join Date: Mar 2012
Chapter/Region:
Tri-State
Location: Northern NJ
Vehicle:1992 Skyline r32 work in progress |
is there any to convert the .hex file you get from ecuflash,so i can send it via email to my tuner. once i leave ecuflash i cannot seem to find the file at all.
i dont think this was discussed in any of these 8 pages |
12-19-2012, 11:38 AM | #189 |
Scooby Specialist
Member#: 276443
Join Date: Mar 2011
Chapter/Region:
TXIC
Location: Abilene, TX
Vehicle:2005 2.1 stroker WRX OBP |
Try and do a search for it? Make sure the folder its suppose to be in that in the properties no folders are being hidden. Make sure you actually saved it to the computer. To channge the file just edit it
|
12-19-2012, 02:03 PM | #190 |
Scooby Newbie
Member#: 313772
Join Date: Mar 2012
Chapter/Region:
Tri-State
Location: Northern NJ
Vehicle:1992 Skyline r32 work in progress |
ive done all of the above but the .hex file seems to vanish but when i do a search it shows up but i cant do anything with it
|
12-29-2012, 06:42 AM | #191 |
Scooby Newbie
Member#: 341826
Join Date: Dec 2012
Chapter/Region:
International
Location: QLD Australia
Vehicle:2005 WRX MY06 Light Bluish Silver |
Okay, so I don't know if this is the right place to write this, but can anybody tell me; would it be considered acceptable for a person with no tuning experience to go out and buy a tactrix and start learning how to use it?
I have an MY06 and the air pump has died. After weeks of speaking to my mechanic mates, dealerships and looking through these and other Subaru forums, I've decided to remove the pump and delete the CEL codes... I've already wasted $50 having a tuner that didn't listen to me "clear" my CEL codes 4 times in a row, and then tell me after I said "I specifically asked for the codes GONE and the thing REFLASHED" that he couldn't do that, but I still had to pay for what he had done... And another tuner has quoted me a few hundred to do this... If I can get the tools to do a job myself for cheaper than to have the service performed, I always try to do it myself. So when I found out I could get the Tactrix OpenPort 2.0 for less than the cost of the tune (reminder, this is just some CEL codes for a secondary air pump delete, not a performance tune or anything), I decided that I'd look into doing it myself. Anyway, I tend to waffle on a bit, but basically, what I'm asking is this: Is this thread for qualified tuners? Or are there people out there teaching themselves to do this stuff?? |
12-29-2012, 09:32 AM | #192 | |
Scooby Specialist
Member#: 274499
Join Date: Feb 2011
Chapter/Region:
NESIC
Location: RI
Vehicle:1994 5.8T Cobra 755rwhp @ 16psi |
Quote:
You will get much better support from the guys at Cobb, you will be less likely to brick your ECU, and don't need to keep a laptop in the car to gather datalogs. (I know the OP2.0 can too... but you can't view data without a pc.) |
|
12-29-2012, 10:32 AM | #193 |
Scooby Newbie
Member#: 341826
Join Date: Dec 2012
Chapter/Region:
International
Location: QLD Australia
Vehicle:2005 WRX MY06 Light Bluish Silver |
Thanks bro, but no Cobb in Australia
Not sure why, but that's the word... ...and everybody's heard... |
12-29-2012, 02:07 PM | #194 |
Scooby Specialist
Member#: 64405
Join Date: Jun 2004
Chapter/Region:
E. Canada
Location: QC, Canada
Vehicle:2018 STi WRB |
I think it is perfectly fine to equip with the cable even if you dont intent to actually tune or change anything. It is a great maintenance and diagnosing tool.
If you look at romraider forum you will find detailed explanation of what to install, how it works, and what to log. There is also different explanations depending if you want to only datalog or actually tune. I read the part for datalog and diagnosing and I thing it is a great tool to be able to do the basic. Then when you have an issue and someone asks if you have a datalog you can say yes and post the information and get better help. Resetting the ecu will clear the check engine light, but if your issue is still there (which is likely if you didnt do any change to the car) the check engine will come back. |
12-31-2012, 12:57 AM | #195 |
Scooby Newbie
Member#: 314744
Join Date: Mar 2012
Location: Charlotte, NC
|
As Black94Snake mentioned, the OpenPort 2.0 has a micro SD slot for standalone logging. I created an online tool that will take a RomRaider profile.xml file and generate the required logcfg.txt from it. It makes it really easy to take your RomRaider profiles and create a config for standalone logging without having to match addresses from the definitions yourself. It also supports calculated parameters. I built it for myself, but figured I would polish it up and put it out there in case it would be useful for anyone else.
http://subaru.hunterjm.com/ If it gains enough traction (or upon recommendation) I can create a separate post, but I thought it related pretty well to this FAQ. To learn more about what you need to do to get your Tactrix configured for standalone logging, visit: http://forums.openecu.org/viewtopic.php?f=57&t=4319 |
01-02-2013, 06:34 PM | #196 |
Scooby Newbie
Member#: 341826
Join Date: Dec 2012
Chapter/Region:
International
Location: QLD Australia
Vehicle:2005 WRX MY06 Light Bluish Silver |
Okay, having a little trouble guys, I'm trying to get "The latest RomRaider ECU definitions", as instructed on RomRaider's site, but in their list on the below page, I cannot find my car. It's an ADM (aussie) MY06 WRX
http://www.romraider.com/forum/viewtopic.php?t=360 I am sure RomRaider supports my car, as I can see it in black and white on their "supported ECUs" page, where it states my year as having two models (06 A8DH200O (MT)*, A8DH200U (MT)*)... My question is, does anybody know where I might find the specific RomRaider ECU definitions for my car?? Or should I be posting this on the RomRaider site? |
01-02-2013, 08:45 PM | #197 |
Scooby Guru
Member#: 70395
Join Date: Sep 2004
Chapter/Region:
MAIC
Location: Da-boonies,Va
|
The definitions will work.........
|
01-03-2013, 05:38 AM | #198 |
Scooby Newbie
Member#: 341826
Join Date: Dec 2012
Chapter/Region:
International
Location: QLD Australia
Vehicle:2005 WRX MY06 Light Bluish Silver |
Thanks very much. Does anybody have any idea WHERE I might find the definitions for an AMD MY06 WRX?
|
01-03-2013, 08:09 AM | #199 | |
Scooby Guru
Member#: 70395
Join Date: Sep 2004
Chapter/Region:
MAIC
Location: Da-boonies,Va
|
Quote:
http://www.romraider.com/forum/topic360.html The definitions are bundled together. If your ECU is shown as supported then the definition is there. The ones listed on the definition page are new ones that have been added.......... |
|
01-03-2013, 08:55 AM | #200 |
Scooby Newbie
Member#: 341826
Join Date: Dec 2012
Chapter/Region:
International
Location: QLD Australia
Vehicle:2005 WRX MY06 Light Bluish Silver |
Okay, sorry Quaz, I didn't mean to be painful... I TOTALLY misread something and was looking for a download... Hahah, nice emoticon
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
romraider/ecuflash? | weaponstroop | Open Source Reflashes | 14 | 03-23-2020 08:27 PM |
reading logs - FAQ or getting started guide? | jmc9809 | Newbies & FAQs | 2 | 08-05-2005 06:40 PM |
I want to get started racing! Where to start? | wayne_rx | Motorsports | 27 | 12-23-2004 03:00 AM |
Auto-Xing Newbe, How to get started? | Ed_RS | New England Impreza Club Forum -- NESIC | 7 | 01-31-2001 11:34 AM |
how to get started | jjp | New England Impreza Club Forum -- NESIC | 5 | 11-09-2000 06:26 AM |