|
|
|
|
Thread Tools | Display Modes |
05-22-2009, 01:49 AM | #1 |
Scooby Specialist
Member#: 176162
Join Date: Mar 2008
Chapter/Region:
SCIC
Location: South Torrance, CA
Vehicle:MY02 Jesus Once Told Me, "Numbers Sell"...... |
USDM 2002 Wrx w/V7 EJ207.... 355AWHP 293TQ
Power Mods:
JDM V7 Sti Motor, Code: EJ207DW4CR MY02 V7 Spec C ECU AVCS works Open Source tuned @ HB SPEED by John aka : JESUS January 23,2009 355awhp @22-23psi with cut out open .. 343awhp @ 20-21psi w/cutout closed Power Enterprise 1818 Turbo w/Separative actuator #6 Spring capable of opening to 2.0 bar , but the most the turbo is rated is 22psi according to there website. NGK LFR7AIX Spark Plugs /Step 1 Colder 850cc Injectors Walboro Fuel Pump Hallman MBC AEM Short ram Inake Perrin Big Intake pipe Hyper Flow FMIC TurboXS RFL BOV IA performance KPH to MPH converter for the V7 Sti Cluster Sti Pitch Stop and mounts Transmission: KartBoy Shifter Bushings STi V6 RA 1st through 4th Gear , Stock 5th. Suspension and Brakes: Cusco Zero-1 Coil overs w/camber plates New Axxis ULT Brake Pads. 300miles on em Exhaust: Invidia Bellmouth QTP Electronic cutout Catless exhaust 3inch piping all the way from the bellmouth to the Stock rear muffler, can you say NINJA SLEEPER !! LOL Exterior: STi front grill STi Hood Scoop Custom Professionally Painted Black Cherry Purple Interior: Jdm V7 Sti interior w/V8 Sti Rear back with pass through. Sti Blue carpet Jdm V7 Sti Gauge Cluster it has 20 k on the odometer for how many miles the motor has on it. Genome STi Defi Boost Gauge, w/ Ver.1 control AC working and Power steering Rims: Rota SubZero Flatblack 91 Octane California Piss gas On Dyno Dynamics Dyno,, USDM 09 STi Dynos at 220AWHP Stock on this Dyno @ HB Speed, Huntington Beach. CA Currently the motor is undergoing a full rebuild Hot tanked Re-sleeved Block, port and polished heads, with Cosworth 2.2L Stroke Kit, Injector Dynamics 1000cc Injectors, ATP GT35R EWG Tial 44mm, High Volume Oil Pump, Cosworth metal head gaskets, ARP head studs, HB Speed Custom Big 80mm Maf Intake w/filter, Perrin 3" Turbo inlet, Kart-Boy Light Crank Pulley. Koyo Rad, Cosworth Timing Belt guide, MFactory Oil Catch Can, SPT oil Cap, Stainless Steel Clutch Line, Braillie Ultra light Battery 11 pounds. Motor Build should be done On or B4 July 30th 2009, ,Dyno will come soon as i break in the Motor. 1,000miles or So. Im selling the Stock Forged Crank and Rods... SOLD Also im Selling the Turbo.... SOLD And Im selling the AEM intake... SOLD 850cc TopFed Injectors Harmen Motive Modified...SOLD Pm me if you want em.....
* Registered users of the site do not see these ads.
Last edited by Mecka20000; 07-01-2009 at 12:58 AM. |
05-22-2009, 01:54 AM | #2 |
Scooby Guru
Member#: 173241
Join Date: Feb 2008
Chapter/Region:
TXIC
Location: Houston, Tx
Vehicle:2002 s256 twinscroll now with one more gear |
why are you spooling so slow? ~24 psi at ~5k? and not making full power till around 7k? seems like a great setup, but i think you would pick up some good power from a PE1820 because it would have some more top end, but you need to get that spool faster
|
05-22-2009, 01:56 AM | #3 |
Scooby Newbie
Member#: 196257
Join Date: Dec 2008
Vehicle:02 wrx 354 whp RIP 10' genesis coupe |
this is an awesome set up, its obvious you took some real time and money to make this happen.
congrats. I would like to see trap speeds, and pics of the car in blazing sunlight |
05-22-2009, 01:57 AM | #4 |
Scooby Newbie
Member#: 196257
Join Date: Dec 2008
Vehicle:02 wrx 354 whp RIP 10' genesis coupe |
looks like avcs is set up for peak power, and high rpms, not spool.
|
05-22-2009, 02:18 AM | #5 |
Scooby Specialist
Member#: 176162
Join Date: Mar 2008
Chapter/Region:
SCIC
Location: South Torrance, CA
Vehicle:MY02 Jesus Once Told Me, "Numbers Sell"...... |
|
05-22-2009, 02:26 AM | #6 |
Scooby Guru
Member#: 173241
Join Date: Feb 2008
Chapter/Region:
TXIC
Location: Houston, Tx
Vehicle:2002 s256 twinscroll now with one more gear |
i always herd of using avcs to help increase spool, seems like you could have dissabled it and just put in some nice cams to get the gains you have, looks like a car built only for the 1320?
|
05-22-2009, 02:38 AM | #7 |
Scooby Specialist
Member#: 176162
Join Date: Mar 2008
Chapter/Region:
SCIC
Location: South Torrance, CA
Vehicle:MY02 Jesus Once Told Me, "Numbers Sell"...... |
I wanted Peak powers, and Hard Hitting turbo Feel all the way to red line, Since I drive alot on the free way so i had Jon at HB Speed set the AVCS up mostly for freeway, that is where i spend most of my time.
|
05-22-2009, 02:40 AM | #8 |
Scooby Specialist
Member#: 176162
Join Date: Mar 2008
Chapter/Region:
SCIC
Location: South Torrance, CA
Vehicle:MY02 Jesus Once Told Me, "Numbers Sell"...... |
When im cruzing on the free way im in 5th gear, and at 65 mph, im sitting at 3500 rpms, right where boost is buildng up
|
05-22-2009, 03:10 AM | #9 |
Scooby Specialist
Member#: 176162
Join Date: Mar 2008
Chapter/Region:
SCIC
Location: South Torrance, CA
Vehicle:MY02 Jesus Once Told Me, "Numbers Sell"...... |
As you wish!
|
05-22-2009, 04:33 AM | #10 |
Scooby Specialist
Member#: 149485
Join Date: May 2007
|
8k rpm!!!! is like an s2k!!!!!!
|
05-22-2009, 07:06 AM | #11 |
Scooby Specialist
Member#: 176162
Join Date: Mar 2008
Chapter/Region:
SCIC
Location: South Torrance, CA
Vehicle:MY02 Jesus Once Told Me, "Numbers Sell"...... |
|
05-22-2009, 10:31 AM | #12 |
Scooby Specialist
Member#: 68647
Join Date: Aug 2004
Chapter/Region:
MAIC
Location: Richmond, VA
Vehicle:07 STI 35R 05 BMW M3 ZCP |
^thats going to be fun with the 35R
Congrats on the power and nice motor build. |
05-24-2009, 03:03 AM | #13 |
Scooby Specialist
Member#: 176162
Join Date: Mar 2008
Chapter/Region:
SCIC
Location: South Torrance, CA
Vehicle:MY02 Jesus Once Told Me, "Numbers Sell"...... |
yes it will!!!!!! Thank you.
: ) |
05-24-2009, 03:20 PM | #14 |
Scooby Newbie
Member#: 139320
Join Date: Jan 2007
Chapter/Region:
BAIC
Location: Turlock, CA
Vehicle:2006 RA 1-4 5mt wrx obp needs a e85 tune |
very nice setup and numbers. i am curious what mph you can get to with your RA gearing and sky high redline? what does the top of 4th gear get to?
|
05-24-2009, 10:18 PM | #15 |
Scooby Newbie
Member#: 198714
Join Date: Dec 2008
Chapter/Region:
International
Location: Kgn, Jamaica
Vehicle:04' JDM STi EJ207 437whp/357wtrq Dom3 24psi |
Real nice set-up bro......it should be a blast to drive.....2.0 FTW
|
05-25-2009, 02:31 AM | #16 |
Scooby Specialist
Member#: 176162
Join Date: Mar 2008
Chapter/Region:
SCIC
Location: South Torrance, CA
Vehicle:MY02 Jesus Once Told Me, "Numbers Sell"...... |
|
05-28-2009, 12:28 AM | #17 |
Scooby Specialist
Member#: 176162
Join Date: Mar 2008
Chapter/Region:
SCIC
Location: South Torrance, CA
Vehicle:MY02 Jesus Once Told Me, "Numbers Sell"...... |
|
05-28-2009, 10:04 AM | #18 |
Scooby Guru
Member#: 4568
Join Date: Mar 2001
Location: 603 whp / EJ207
Vehicle:10.7 @ 136, '02 WRX 12.8 @ 112, '09 spec.B |
Was a nice set-up... why the rebuild?
def |
05-28-2009, 10:27 AM | #19 |
Scooby Specialist
Member#: 54060
Join Date: Feb 2004
Chapter/Region:
Tri-State
Location: N Jersey
Vehicle:Now: 16 FXT/04v8 207 Then:JRTuned fastest td04 |
|
05-28-2009, 04:14 PM | #20 |
Scooby Specialist
Member#: 176162
Join Date: Mar 2008
Chapter/Region:
SCIC
Location: South Torrance, CA
Vehicle:MY02 Jesus Once Told Me, "Numbers Sell"...... |
the Hallman MBC line came off the waste gate during driving, turbo over boosted and surging on the freeway, by the time i looked at the boost gauge flashing red it took 2 sec and then POOF and i lost cylinder one. I checked the peak and it showed the boost spiked to 2.0 bar, so now the dream build... well not quite yet. i still want bigger brakes, and a nice set of rims. |
05-28-2009, 04:16 PM | #21 |
Scooby Specialist
Member#: 176162
Join Date: Mar 2008
Chapter/Region:
SCIC
Location: South Torrance, CA
Vehicle:MY02 Jesus Once Told Me, "Numbers Sell"...... |
|
05-29-2009, 08:50 AM | #22 | |
Scooby Newbie
Member#: 198714
Join Date: Dec 2008
Chapter/Region:
International
Location: Kgn, Jamaica
Vehicle:04' JDM STi EJ207 437whp/357wtrq Dom3 24psi |
DAMN....your not jokin'
Quote:
This is goin to be good Last edited by DuCash; 05-29-2009 at 08:51 AM. Reason: Forgot Something LOL |
|
05-29-2009, 05:38 PM | #23 | |
Scooby Specialist
Member#: 176162
Join Date: Mar 2008
Chapter/Region:
SCIC
Location: South Torrance, CA
Vehicle:MY02 Jesus Once Told Me, "Numbers Sell"...... |
Tru Compress surge
Quote:
Last edited by Mecka20000; 05-29-2009 at 05:56 PM. |
|
05-31-2009, 02:14 AM | #24 |
Scooby Specialist
Member#: 176162
Join Date: Mar 2008
Chapter/Region:
SCIC
Location: South Torrance, CA
Vehicle:MY02 Jesus Once Told Me, "Numbers Sell"...... |
poof....
|
05-31-2009, 03:42 AM | #25 | |
Scooby Newbie
Member#: 198714
Join Date: Dec 2008
Chapter/Region:
International
Location: Kgn, Jamaica
Vehicle:04' JDM STi EJ207 437whp/357wtrq Dom3 24psi |
Quote:
Thanks for sharing the knowledge, if i ever here that i'll be letting off immediately... |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
eg33 into usdm 2002 wrx | railguy | Subaru Conversions | 6 | 01-07-2008 04:46 PM |
NY: USDM 2002 WRX Interior: both front seats, rear seat and all 4 door cards. | Royal Motors | Interior/Dressup/Audio & Security | 32 | 07-12-2007 10:09 AM |
help!..what the tranny code of the USDM 2002 WRX?? | PUMPKINS | Transmission (AT/MT) & Driveline | 1 | 05-09-2004 08:08 AM |
Does anyone know if this is a direct bolt-on to a USDM 2002 WRX? | MK2TMR2 | Brakes, Steering & Suspension | 1 | 04-26-2003 09:35 AM |