|
|
|
|
Thread Tools | Display Modes |
09-19-2005, 07:26 PM | #1 |
Former Vendor
Vendor Sales Rating: (65)
Member#: 23216
Join Date: Aug 2002
Location: Lake Forest, CA | 949-457-1234
Vehicle:2006 949-457-1234 949-457-1234 |
Warehouse Clearance - JDM STI V7 EJ207, JDM STI V7 Hybrid, JDM EJ205 AVCS!!
Hey guys,
We need roooooom!!! Have the following on sale! -JDM STI V7 EJ207 Complete Long Block!! -Less than 1000km on engine (needs to be broken in) -Complete engine, includes water pump, power steering, alternator, etc -Includes STI Injectors -Early JDM V7 port heads (not big port) -JDM STI high lift/duration valvetrain & camshafts -Semi-closed block -Full AVCS, Forged Pistons, High Compression - the good stuff -Semi Closed Deck Block designed for high boost levels -A great swap for anyone looking for big power into a WRX -Add JDM V7 ECU (so you can control AVCS) - $399 $SOLD, THANKS!!! -JDM STI V8 EJ207 Hybrid Long Block!! -JDM V7 EJ207 Shortblock, JDM V8 WRX Heads (AVCS capable) -Forged higher compression Pistons -JDM AVCS (higher lift / duration cams) -JDM AVCS head / valvetrain -Not included - intake/exhaust manifold, injectors -Less than 1000km on shortblock and heads -Great for WRX replacement engine Guys this engine was originally intended for our shop chassis as the best "bang for the buck" high power engine we could find. Combined with the AVCS, the V7 JDM short block, this was going to be a kick-butt 2.0 car. But unfortunately thigns have changed (we're going with an H6 3.0 now) so now's your opportunity to purchase our personal "bang for the buck" engine solution. $SOLD, THANKS Add JDM AVCS ECU for - $399 -JDM V7 EJ205 Long Block!! -JDM V7 EJ205 (Legacy 2.0 Turbo) -Higher compression Pistons -JDM WRX AVCS (higher lift / duration cams) -JDM WRX AVCS head / valvetrain -Not included - Intake/exhaust manifold, injectors -Less than 1000km on engine -Great for WRX engine swaps (isntallation is as easy as getting rid of the plastic instake manifold and dropping the WRX manifold in - AVCS is additional wiring) $1399 Add JDM AVCS ECU for - $399 JDM WRX EJ205 ENGINE FAQ Please contact us with any questions. Thanks!!! Geoff [email protected] 510-783-5300
* Registered users of the site do not see these ads.
Last edited by Gruppe-S; 09-23-2005 at 04:38 PM. |
09-19-2005, 07:26 PM | #2 |
Former Vendor
Vendor Sales Rating: (65)
Member#: 23216
Join Date: Aug 2002
Location: Lake Forest, CA | 949-457-1234
Vehicle:2006 949-457-1234 949-457-1234 |
EVERYTHING IN STOCK AND READY TO SHIP
Special Helix Combos: WRX Power Package Stage #1 - 250 crank hp - Helix Uppipe - Helix Catless Downpipe - Helix Cat-back - Gaskets - CEL fix $849 Shipped! *For Catted Downpipe add $110 WRX Power Package Stage #1B - 260 crank hp - Helix Uppipe - Helix Catless Downpipe - Helix Cat-back - Gruppe-S V2 Manifold - Gaskets - CEL fix $1225 Shipped! *For Catted Downpipe add $110 STi Power Package Stage #1 - 330 crank hp - Helix Catless Downpipe - Helix Cat-back - Gaskets - CEL fix $699 Shipped! *For Catted Downpipe add $110 STi Power Package Stage #1B - 350 crank hp - Helix Catless Downpipe - Helix Cat-back - Gaskets - Gruppe-S V2 Manifold - CEL fix $1075 Shipped! *For Catted Downpipe add $110 Add an Ecutek ECU Reflash (w/ Overnight Service) to any of these packages for $650. If you over-night ship your ECU to us, we will reflash it for your specific modifications and and then over-night ship your modified ECU back to you by the next business day. You can expect roughly a 20WHP and 20 WTQ gain depending on your modifications. Add a Helix TMIC - 02+ WRX/04+ STi to any of these packages for $549!!! The massive bar and plate core allows efficient cooling of the intake charge with minimal pressure drop. 25 + degree (F) intake charge temperature reductions are realized over the stock TMIC – helping to both increase power and reduce risk of detonation.* Included is a cast-aluminum Y-pipe, silicon hose, and the cast end-tanks are CNC machined to ensure optimal flow characteristics. Dyno-testing has yielded over 15whp gains with even greater performance gains in real world conditions. Individual items: Helix Uppipe: $179 Shipped -Flex Uppipe -Removes catalytic converter on WRX -Faster turbo spoolup Helix Catted Downpipe: $399 shipped -Full 3" bellmouth design -Will pass emissions sniffer test (but not visual inspection) Helix Catless Downpipe: $285 shipped -Full 3" bellmouth design Helix Downpipe / Uppipe Combo: $450 Shipped Catless, $560 Shipped Catted Helix Catback: $499 Shipped -Full 3" design; does not taper. -Full Stainless Steel -Comes with silencer and all necessary hardware and gaskets. Helix TMIC: $599 Shipped Gruppe-S V2 Headers: $399 Shipped -Dyno proven to gain HP and TQ -Full Stainless steel Helix Uppipe / Gruppe-S V2 Headers Combo: $499 Shipped Thanks, Geoff 510-783-5300 [email protected] |
09-19-2005, 07:27 PM | #3 |
Former Vendor
Vendor Sales Rating: (65)
Member#: 23216
Join Date: Aug 2002
Location: Lake Forest, CA | 949-457-1234
Vehicle:2006 949-457-1234 949-457-1234 |
And, we still have the extremely popular $1249 VF34 Power package special going on:
IHI VF34 + STI 565CC Injectors + Walbro Fuel Pump -375HP Capable on a WRX (with proper tuning) -Includes Genuine IHI VF34 -Genuine STI 565cc Pink Injectors -Walbro 255l/h Fuel Pump $1249 shipped!!! IHI VF34 + STI 565CC Injectors + Walbro Fuel Pump+Ecutek Reflash -Send us your ECU and we'll reflash it and we'll overnight it back to you $1949 shipped!!! IHI VF34 + STI 565CC Injectors + Walbro Fuel Pump + Installation + Ecutek Reflash + Custom Dynotune -Please call to schedule an appointment $2299 shipped!!! Exhausts: Greddy Evo2 Catback- 02+ WRX / 04+ STI The Greddy EVO2 exhaust for the Subaru WRX/STi is one of the quietest exhaust systems on the market. Made from Full Stainless Steel. Full 80mm mandrel bent piping. $549 shipped!!! Borla Hush Catback- 02+ WRX / 04+ STI The Borla Hush exhaust for the Subaru WRX/STi is also one of the quietest exhaust systems on the market. It also features a very stock looking twin-tip design which is always nice if you're not trying to attract attention from the authorities. Made from Full Stainless Steel. Full 80mm mandrel bent piping. Available with 3" downpipe adapter flange at extra cost. $PRICE TOO LOW TO POST!!! HKS Carbon Ti Catback - 02+ WRX / 04+ STI The Carbon Ti exhaust for the Subaru WRX/STi is also one of the most popular exhaust systems on the market because of its titanium tip and carbon muffler. It has a nice agressive tone and features stainless steel 75mm mandrel bent piping. $729 Shipped!!! HKS Hiper- 02+ WRX / 04+ STI The Hiper is similar to the Carbon Ti but lacks the Ti tip and carbon muffler. It has a nice agressive tone and features stainless steel 75mm mandrel bent piping. $529 Shipped!!! |
09-19-2005, 09:09 PM | #4 |
Former Vendor
Vendor Sales Rating: (65)
Member#: 23216
Join Date: Aug 2002
Location: Lake Forest, CA | 949-457-1234
Vehicle:2006 949-457-1234 949-457-1234 |
Cooling:
Gruppe-S Carbon Fiber Radiator Shroud- 02+ WRX / 04+ STI Approximately 20% of incoming air current is diverted away from the radiator by the radiator support. The radiator shroud reduces this loss, by redirecting airflow over the radiator. The result is an increased cooling efficiency of the radiator. The Gruppe-S Carbon Fiber Radiator shroud is made from high quality dry carbon fiber to insure that it is as light as possible. $99 Shipped!!! Injectors / Puel Pumps: STi 565cc Pink Injectors- 02-05 WRX The STI 565cc injectors are OE Subaru high-performance injectors found on the high horsepower STI, STI-RA, and S202 Impreza models. These injectors are factory rated at 525cc but because of the common "under-rating" system of Japanese manufacturers, these injectors have been independently tested to flow 565cc. We recommend the use of these injectors for applications of 240whp-300whp. A very good compliment for all IHI VF-series turbos. $379 Shipped!!! Walbro 255 lph Fuel Pump - w/ 02-05 WRX/ 04+ STi Setup Kit This pump is a logical and necessary with for upgraded injectors. $89 Shipped!!! $449 Shipped for 565 Pink injectors w/ Walbro 255L Fuel Pump!!! We actually have PE injectors in stock. These things are almost always backordered for 3 weeks so if you were thinking about buying some, now might be the right time! These are a necessary upgrade for any larger turbo upgrade for the WRX and STi PE 650cc Topfeed High Impedence Injectors - 02-05 WRX These injectors are an excellent choice for medium to larger size turbo upgrades for your WRX. They are larger than the STi Pink 565 Injectors but are smaller than the PE 800 injectors. -650cc: 300-350WHP (360-420HP crank)* $629 shipped PE 850cc Sidefeed High Impedence Injectors - 04+ STi These injectors are an excellent choice for medium to large size turbo upgrades for your STi. They are far larger than your stock 480cc injectors and the Perrin Modified injectors (816cc). -850cc: 350-475WHP (420-570HP crank)* $629 shipped Perrin Modified 816cc Injectors for STi A cheaper alternative to the PE 850 injectors, these are stock 480cc STi injectors that have been modified by Perrin to flow in excess of 816cc. $449 shipped Acessories: Gruppe-S Heat Shield- 02-05 WRX This heatshield will lower your underhood operating temperatures by directing heat from the turbo and downpipe away fromt your TMIC and the rest of your engine. This will in turn lead to more power from cooler intake temperature and better engine operating conditions. $49 Shipped!!! Thanks, Geoff 510-783-5300 [email protected] |
09-20-2005, 12:16 AM | #5 |
Scooby Newbie
Member Sales Rating: (0)
Member#: 76083
Join Date: Nov 2004
Location: St.Marys, Ga
Vehicle:03 wrx silver |
%$#@!!!!!!!!.. OK, what the heck..I just called you guys the other day..You told me you had no GT30r turbo kits,and no jdm heads,or motors..So, i break down and buy v6 heads instaed..And now you guys do have jdm motors..Saying you need to clear space..You guys are killing me..I would have bought this hybrid..And now dont have the money..
|
09-20-2005, 12:31 AM | #6 |
Former Vendor
Vendor Sales Rating: (65)
Member#: 23216
Join Date: Aug 2002
Location: Lake Forest, CA | 949-457-1234
Vehicle:2006 949-457-1234 949-457-1234 |
Werkinprogress - I'm very sorry - these engines just returned from our engine builder for inspection and just arrived / were made available for sale on saturday (this last weekend). Sorry about this. If you can return whatever you purchased, the motor is all yours!! Sorry man,
Gary Gruppe-S |
09-20-2005, 01:33 AM | #7 |
Scooby Newbie
Member Sales Rating: (0)
Member#: 76083
Join Date: Nov 2004
Location: St.Marys, Ga
Vehicle:03 wrx silver |
I dont know if i can return these..They are already shipping to me..I have a v7 shortblock..And wanted either v7 or v8 heads,,I called you guys on friday,and asked for either your turbo kit,or any of the above stated heads..And i was told you had neither..And this isnt the first time..I asked here about your gt30r kits..And somebody replied that you had them in stock on here..The day after, i called and was told that you didnt have any..Then you say you dont have any motors..And then you put out a post that you need to clear space,that doesnt make any sense what so ever..I appreciate the offer..But, now i have to try and get rid of these to buy yours..And who knows if i'll even be able to sell these..This just sucks a big one..Justin..
|
09-20-2005, 05:14 PM | #8 |
Scooby Guru
Member Sales Rating: (66)
Member#: 80649
Join Date: Jan 2005
Chapter/Region:
South East
Location: Columbia, SC
Vehicle:2000 2.5 Auto-X RSTi Sparkly |
I don't know if werkinprogress already has dibs, but I am very interested in the hybrid block. If you could PM me all the details about it (what is and is not included with it, what I will need to put it in my 02 wrx, and if I could get any combo deals for the parts I need) I'd really appreciate it!! Let me know!
PM has been sent. Last edited by subydude; 09-21-2005 at 09:21 AM. |
09-20-2005, 05:55 PM | #9 |
Scooby Newbie
Member Sales Rating: (0)
Member#: 64102
Join Date: Jun 2004
Chapter/Region:
RMIC
Location: Front Range
Vehicle:05 STi 48W |
(quote) JDM STI V7 EJ207 Complete Long Block!!
-Less than 1000km on engine (needs to be broken in) -Complete engine, includes water pump, power steering, alternator, etc -Includes STI Injectors -Early JDM V7 port heads (not big port) -JDM STI high lift/duration valvetrain & camshafts -Semi-closed block -Full AVCS, Forged Pistons, High Compression - the good stuff -Semi Closed Deck Block designed for high boost levels -A great swap for anyone looking for big power into a WRX -Add JDM V7 ECU (so you can control AVCS) - $399 (quote) could this be fitted with AC from my 04 WRX? Also, what else would be needed to swap this into my WRX and use the JDM ECU (recalibrated to 93 oct)? I am guessing headers, Turbo, TBE, various hoses/restrictors.... |
09-21-2005, 10:01 PM | #13 |
Former Vendor
Vendor Sales Rating: (65)
Member#: 23216
Join Date: Aug 2002
Location: Lake Forest, CA | 949-457-1234
Vehicle:2006 949-457-1234 949-457-1234 |
Hey all,
Sorry for the lack of response. It's been crazy the last couple of days!!! The hybrid and STi motor were sold within minutes of being posted up but we still have the Leg motors. Thanks, Geoff |
09-21-2005, 10:03 PM | #14 | |
Former Vendor
Vendor Sales Rating: (65)
Member#: 23216
Join Date: Aug 2002
Location: Lake Forest, CA | 949-457-1234
Vehicle:2006 949-457-1234 949-457-1234 |
Quote:
Thanks, Geoff |
|
09-26-2005, 06:18 PM | #22 | |
Former Vendor
Vendor Sales Rating: (65)
Member#: 23216
Join Date: Aug 2002
Location: Lake Forest, CA | 949-457-1234
Vehicle:2006 949-457-1234 949-457-1234 |
Quote:
Thanks, Geoff |
|
01-09-2007, 10:07 PM | #25 |
Former Vendor
Vendor Sales Rating: (65)
Member#: 23216
Join Date: Aug 2002
Location: Lake Forest, CA | 949-457-1234
Vehicle:2006 949-457-1234 949-457-1234 |
Hi,
Wow this is an OLD thread! We can build you out a full V8 JDM fully forged engine for $4399 if you're interested. This would include full rebuild nitrided, cross drilled SB with Helix rods, Wiseco pistons, JDM V8 heads, JDM V8 cams, Helix valvetrain, new head gaskets, ARP studs, new water/oil pumps, etc. Please give us a call if you're interested we have one core available for this build. Thanks, Gary [email protected] CLOSING THIS THREAD NOW AS IT'S BACK FROM 2005! |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
08 ej207 JDM dual AVCS heads on a built v7 ej207 | icev7 | Built Motor Discussion | 17 | 02-21-2010 03:21 PM |
JDM 2.0L STI EJ207 V7 into 2005 STI | AnorexicSTI | Subaru Conversions | 3 | 05-20-2009 11:27 AM |
FS: v7 EJ207 motor, L to v7 STi merged harness, EWG exhaust package. | DoctorNick | Engine/Power/Exhaust | 1 | 04-09-2008 02:58 PM |
ej257 short block or V7 JDM STI ENGINE EJ207 please help me | benwaballs | Factory 2.0L Turbo Powertrain (EJ Series Factory 2.0L Turbo) | 10 | 11-22-2006 03:54 PM |
1 JDM STI V7 EJ207 (Early V7) - $2999 + Shipping (Everything else in stock too!!!) | Gruppe-S | Engine/Power/Exhaust | 4 | 09-19-2005 07:10 PM |