|
|
|
|
Thread Tools | Display Modes |
02-01-2022, 11:44 PM | #1 |
Scooby Newbie
Member#: 523198
Join Date: Mar 2021
|
2002 wrx engine rebuild
Have been rebuilding my wrx with a new engine for my old engine had turbo shrapnel sent through it. The new engine I bought was a non-avcs Jdm engine, supposedly the same engine that was already in it. From doing the swap from the old to the new engine everything was the same except for the head on the turbo charger side.
The heads valve cover has two hard hose connections coming out on the old engine. The new engine that supposed to be the same engine only has one connection coming out of the valve cover and it even looks like a plastic connection made into the head. Is this something that I need to change the heads on the engine or can I change the connections out. Any help is greatly appreciated
* Registered users of the site do not see these ads.
|
02-02-2022, 01:16 AM | #2 |
Scooby Specialist
Member#: 395793
Join Date: Jul 2014
Chapter/Region:
Tri-State
Location: SLC and Lake Placid
Vehicle:2005 92x Aero Beige |
Pictures will help
|
02-02-2022, 01:51 AM | #3 |
Scooby Specialist
Member#: 508105
Join Date: Nov 2019
Chapter/Region:
NWIC
Location: Greater Seattle Area
Vehicle:Link G4X flex tuned 02' EJ205 20G 6MT wagon |
|
02-02-2022, 11:05 AM | #4 |
Scooby Specialist
Member#: 515308
Join Date: Jun 2020
|
Can’t swapp valve covers?
|
02-03-2022, 05:50 AM | #5 |
Scooby Newbie
Member#: 523198
Join Date: Mar 2021
|
See that was my first initial thought was to change the valve covers. But I’m worried that there’s some kind of like internal flow routed through the head to those two hose connections. To where the current one would only have something routed inside for one hose. This is my first Subaru build, I know as much as the next guy. I’ll try to get some pictures today when I go back out to the shop.
|
Thread Tools | |
Display Modes | |
|
|