Welcome to the North American Subaru Impreza Owners Club Monday March 18, 2024
Home Forums Images WikiNASIOC Products Store Modifications Upgrade Garage
NASIOC
Go Back   NASIOC > NASIOC General > Proven Power Bragging

Welcome to NASIOC - The world's largest online community for Subaru enthusiasts!
Welcome to the NASIOC.com Subaru forum.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, free of charge, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!

If you have any problems with the registration process or your account login, please contact us.







* As an Amazon Associate I earn from qualifying purchases. 
* Registered users of the site do not see these ads. 
Reply
 
Thread Tools Display Modes
Old 06-20-2010, 01:18 PM   #51
SVT_WRX
Scooby Specialist
 
Member#: 164830
Join Date: Nov 2007
Chapter/Region: SCIC
Location: San Diego
Vehicle:
2002 WRX
G61 III OVE 58e

Default

I asked Flava Flave what he thinks about the hta68 and he says----"don't believe the hype! Don't, don't, don't believe the hype!"
* Registered users of the site do not see these ads.
SVT_WRX is offline   Reply With Quote
Sponsored Links
* Registered users of the site do not see these ads.
Old 06-20-2010, 04:37 PM   #52
stalkerz
Scooby Newbie
 
Member#: 242207
Join Date: Mar 2010
Default

does anyone know where can I get a 20g XT for the lowest price? I have seen people mentioned about getting them for $12xx, but couldn't really find any vendor offering at that price range
stalkerz is offline   Reply With Quote
Old 06-20-2010, 05:27 PM   #53
spx19811
Scooby Newbie
 
Member#: 218998
Join Date: Jul 2009
Chapter/Region: Tri-State
Location: levittown pa
Vehicle:
2009 wrx hatch
blue

Default

I think the intro price thing is over with but i would recommend going either directly through blouch or going to import image who generally has pretty good prices also
spx19811 is offline   Reply With Quote
Old 06-20-2010, 10:07 PM   #54
Moore Performance
Former Vendor
 
Member#: 231489
Join Date: Dec 2009
Chapter/Region: MAIC
Location: Pittsburgh, Pa
Default

To throw another turbo into the mix, we are currently testing our twin scroll turbo kit's using Lancer Evolution turbos, specially prepped by FP for us, and one of the turbo's we plan to test in the near future is this twin scroll 68hta turbo....

http://store.forcedperformance.net/m...e=Lancer-Turbo

This turbo will be avaialable with 9, 9.8 or 10.5 cm housings and currently we tested our 2.5 liter header/uppipe setup on my stock longblock 2.0 liter with the largest of our header primary diameters, Evo 9 turbo with a 9 cm housing, IWG, a mild tune and pump gas, it made the graph shown in post #19. The car feels great and there's alot more left in it even on pump gas.

The next turbo we will test will be the Evo 6.5 RS TME.....

http://store.forcedperformance.net/m...e=Lancer-Turbo

It should move the tq curve left and it should hold power all the way to redline like the other turbo, and we feel this will be a better match for the ej20.

Just something for you guys to think about.
Moore Performance is offline   Reply With Quote
Old 06-20-2010, 10:15 PM   #55
Dave D.
NASIOC Supporter
 
Member#: 130990
Join Date: Nov 2006
Chapter/Region: NWIC
Location: Menzel Lake, WA
Vehicle:
06 Red Ltd.Wagon
Dom 1.5xtr JJ tuned

Default

Quote:
Originally Posted by Concillian View Post
Applying logic:
18g-XT will outflow 18g
therefore 18g-XT 8cm2 will outflow HTA68 10cm2

And that pretty much sums up the top-end debate.
Well, I have to admit I'm curious. Does anybody actually have a dyno plot for the 18G-XT? Sure haven't seen one in this thread, just a lot of hta68 trash talk.

You guys just wait 'til I get my full turboback!

Edit noting the above (Moore's) post: I think the hta68 may really shine on pump with the bigger housing. I think my tuner Dom's got the right idea here going 10cm^2.

Last edited by Dave D.; 06-20-2010 at 10:22 PM.
Dave D. is offline   Reply With Quote
Old 06-21-2010, 02:09 AM   #56
Concillian
Scooby Guru
 
Member#: 4414
Join Date: Feb 2001
Location: Dublin, CA
Vehicle:
2002 WRX Sedan
Midnight Black

Default

Not much 18g-XT talk / results here, I've seen more on iwsti it looked promising, but it was a dyno I wasn't familiar with, and had no direct comparison.
Concillian is offline   Reply With Quote
Old 06-21-2010, 11:14 AM   #57
Phatron
Scooby Guru
 
Member#: 36033
Join Date: Apr 2003
Chapter/Region: SCIC
Location: Tuning Lab
Vehicle:
CEO PhatBottiTuning
2006 STi GTX3582 + Meth

Default

Quote:
Originally Posted by Dave D. View Post
You guys just wait 'til I get my full turboback!

Edit noting the above (Moore's) post: I think the hta68 may really shine on pump with the bigger housing. I think my tuner Dom's got the right idea here going 10cm^2.
what happened to your 2.5" taper doesnt hurt power talk?

getting the exhaust through the turbine isnt really the problem on this turbo......its flowing "47 lb" through the compressor housing thats the issue.
Phatron is offline   Reply With Quote
Old 06-21-2010, 01:46 PM   #58
Dave D.
NASIOC Supporter
 
Member#: 130990
Join Date: Nov 2006
Chapter/Region: NWIC
Location: Menzel Lake, WA
Vehicle:
06 Red Ltd.Wagon
Dom 1.5xtr JJ tuned

Default

Quote:
Originally Posted by Phatron View Post
what happened to your 2.5" taper doesnt hurt power talk?

getting the exhaust through the turbine isnt really the problem on this turbo......its flowing "47 lb" through the compressor housing thats the issue.
Hey, I recanted in a post back there somewhere -- my conclusion is now that it's ok up to a VF39 -- but you yourself helped to convince me I've maxed out the exhaust at this time. I never said there wasn't a point that 2.5" wouldn't do.

Dom seems to think the major restriction was the exhaust side. Like I have said, I can't wait to eliminate this variable.
Dave D. is offline   Reply With Quote
Old 06-21-2010, 08:21 PM   #59
wrxsti.l
Scooby Specialist
 
Member#: 156973
Join Date: Aug 2007
Chapter/Region: International
Location: Adelaide, Australia
Vehicle:
2002 ADM WRX STi
STi Black/Blue

Default

Quote:
Originally Posted by Dave D. View Post
Well, I have to admit I'm curious. Does anybody actually have a dyno plot for the 18G-XT? Sure haven't seen one in this thread, just a lot of hta68 trash talk.
See the lists HERE for links to logs and plots. The highest whp a HTA68 made was 330whp on a 2.5L, while even an older TD05-18G made almost 360whp on a smaller 2.0L.

There is nothing wrong with a HTA68 for those who want quick spool and moderate power, but when ppl try and pass it off as a turbo that is bigger or better then what it is, you'll find ppl will always object.

Leslie
wrxsti.l is offline   Reply With Quote
Old 06-21-2010, 08:38 PM   #60
rubinm
Scooby Specialist
 
Member#: 63483
Join Date: Jun 2004
Chapter/Region: RMIC
Location: Ski Town USA
Vehicle:
2005 STi HTA68'd+e85
Aspen White

Default

399 whp / 465 tq HTA68 on e85.




link:

http://www.iwsti.com/forums/power-br...trq-68hta.html
rubinm is offline   Reply With Quote
Old 06-21-2010, 09:26 PM   #61
Dave D.
NASIOC Supporter
 
Member#: 130990
Join Date: Nov 2006
Chapter/Region: NWIC
Location: Menzel Lake, WA
Vehicle:
06 Red Ltd.Wagon
Dom 1.5xtr JJ tuned

Default

Quote:
Originally Posted by wrxsti.l View Post
See the lists HERE for links to logs and plots. The highest whp a HTA68 made was 330whp on a 2.5L, while even an older TD05-18G made almost 360whp on a smaller 2.0L.Leslie
It took E85 to do it. The other barn-burners needed E85, meth, or race gas to get to this level.

Quote:
Originally Posted by rubinm View Post
399 whp / 465 tq HTA68 on e85. link:

http://www.iwsti.com/forums/power-br...trq-68hta.html
Myself I'm interested in pump gas results. Guess I'll have to see what I can find for reference besides my own data points.

My hypothesis at this point is that small hotsides do very well with high octane, allowing quick spool and avoiding pulled timing on top.

Of course I'm not running a 7cm^2 hotside, which is why I think the 10cm^2 hotside with a free-flowing exhaust might make a statement on pump.
Dave D. is offline   Reply With Quote
Old 06-21-2010, 10:53 PM   #62
wrxsti.l
Scooby Specialist
 
Member#: 156973
Join Date: Aug 2007
Chapter/Region: International
Location: Adelaide, Australia
Vehicle:
2002 ADM WRX STi
STi Black/Blue

Default

Quote:
Originally Posted by rubinm View Post
399 whp / 465 tq HTA68 on e85.
link:

http://www.iwsti.com/forums/power-br...trq-68hta.html
You post a link to a thread where a guy claims he made 399. No dyno sheet, no logs, nothing. My car makes 600whp with a TD04

Quote:
Originally Posted by Dave D. View Post
It took E85 to do it. The other barn-burners needed E85, meth, or race gas to get to this level.
And the HTA68 was on E70. Check the list, there are 18g's making more power on less boost with less timing (plus I'm pretty sure Renosuby's result was on 93 pump fuel)

I'm not having a go at your choice for using a HTA68, just the incorrect information that ppl constantly spread about the HTA68.

TBH the HTA68 is a great turbo for what it is - a 16g that provides fast boost response with a little more whp then stock sti turbo - but at the end of the day, it is only a 16g with a ~10% higher flowing comp wheel.

PPL should stop quoting and spreading the BS power figures, as it is distracting and wrong and leads to other NASIOC members buying a turbo that does not meet their needs.

Quote:
Originally Posted by rubinm View Post
Myself I'm interested in pump gas results. Guess I'll have to see what I can find for reference besides my own data points.
Time and time agin ppl have shown the HTA68 doesn't make the numbers on pump fuel. Most get around 300whp on pump - and that is on a dyno, and every man + dog knows dyno are for tuning, not for accurately comparing whp/tq figures.

Quote:
Originally Posted by rubinm View Post
My hypothesis at this point is that small hotsides do very well with high octane, allowing quick spool and avoiding pulled timing on top.

Of course I'm not running a 7cm^2 hotside, which is why I think the 10cm^2 hotside with a free-flowing exhaust might make a statement on pump.
As I mentioned above, at the end of the day, it is only a 16g with a ~10% higher flowing comp wheel - so regardless of turbine flow, you're still limited by the low flowing compressor wheel.

Leslie
wrxsti.l is offline   Reply With Quote
Old 06-22-2010, 12:55 AM   #63
rubinm
Scooby Specialist
 
Member#: 63483
Join Date: Jun 2004
Chapter/Region: RMIC
Location: Ski Town USA
Vehicle:
2005 STi HTA68'd+e85
Aspen White

Default

Quote:
Originally Posted by wrxsti.l View Post
You post a link to a thread where a guy claims he made 399. No dyno sheet, no logs, nothing. My car makes 600whp with a TD04

actually leslie he posted a graph, albeit in the wrong format, which i asked him to correct. give him a chance and the graph will be up.



Graphs are in the video.

had you taken the time to read the thread you would have seen that

http://www.youtube.com/v/x28e46g99zU...ram%3E%3Cparam

i think his numbers are very inflated.

is your TD04 a billet wheel?

Last edited by rubinm; 06-22-2010 at 01:30 PM.
rubinm is offline   Reply With Quote
Old 06-22-2010, 10:00 AM   #64
LittleBlueGT
Scooby Specialist
 
Member#: 96204
Join Date: Sep 2005
Chapter/Region: W. Canada
Location: Winnipeg
Vehicle:
2013 STI GR
White

Default

FWIW I have a couple of logs showing 370+ airboy whp on a HTA68 on E85.

21+ psi held to red-line and airflow of approximately 335-350 g/s with the MAF scaled the correct way.

I flow about 35+ g/s more then a VF series turbo in the exact same weather, elevation, from the same tuner with same WB (me). and spool on the 68 is within 50 rpm of the VF.
LittleBlueGT is offline   Reply With Quote
Old 06-22-2010, 10:16 AM   #65
SVT_WRX
Scooby Specialist
 
Member#: 164830
Join Date: Nov 2007
Chapter/Region: SCIC
Location: San Diego
Vehicle:
2002 WRX
G61 III OVE 58e

Default

Quote:
Originally Posted by LittleBlueGT View Post
FWIW I have a couple of logs showing 370+ airboy whp on a HTA68 on E85.

21+ psi held to red-line and airflow of approximately 335-350 g/s with the MAF scaled the correct way.

I flow about 35+ g/s more then a VF series turbo in the exact same weather, elevation, from the same tuner with same WB (me). and spool on the 68 is within 50 rpm of the VF.
Don't speak about it...be about it. Post your logs both here and in the Official road dyno thread. I'd like to see the Mafv as well.
SVT_WRX is offline   Reply With Quote
Old 06-22-2010, 01:14 PM   #66
Clark Turner
Former Vendor
 
Member#: 178047
Join Date: Apr 2008
Chapter/Region: SWIC
Location: AZ
Vehicle:
02 WRX STI Spec C
Black

Default

They had a good run with this little turbo. FP, Slap some more parts togther.. Nasioc needs a new "turbo of the week"

I have seen this time and time again With turbo shops in the last 8 years I have been here. THey come out with some new super turbo. Kick back to some dyno shop to make amazing plots. They sell a thousand of them and people realize, it actualy sucks.

Skip the 18G altogher. I never liked the 18G on these motors. 16G or 20G is what I recomend.


C


Quote:
Originally Posted by wrxsti.l View Post
You post a link to a thread where a guy claims he made 399. No dyno sheet, no logs, nothing. My car makes 600whp with a TD04


And the HTA68 was on E70. Check the list, there are 18g's making more power on less boost with less timing (plus I'm pretty sure Renosuby's result was on 93 pump fuel)

I'm not having a go at your choice for using a HTA68, just the incorrect information that ppl constantly spread about the HTA68.

TBH the HTA68 is a great turbo for what it is - a 16g that provides fast boost response with a little more whp then stock sti turbo - but at the end of the day, it is only a 16g with a ~10% higher flowing comp wheel.

PPL should stop quoting and spreading the BS power figures, as it is distracting and wrong and leads to other NASIOC members buying a turbo that does not meet their needs.


Time and time agin ppl have shown the HTA68 doesn't make the numbers on pump fuel. Most get around 300whp on pump - and that is on a dyno, and every man + dog knows dyno are for tuning, not for accurately comparing whp/tq figures.


As I mentioned above, at the end of the day, it is only a 16g with a ~10% higher flowing comp wheel - so regardless of turbine flow, you're still limited by the low flowing compressor wheel.

Leslie
Clark Turner is offline   Reply With Quote
Old 06-22-2010, 01:36 PM   #67
Ferraz
Scooby Specialist
 
Member#: 173553
Join Date: Mar 2008
Chapter/Region: International
Location: Sao Paulo
Vehicle:
1996 Civic VTi
Dark blue

Default

Quote:
Originally Posted by Clark Turner View Post
Skip the 18G altogher. I never liked the 18G on these motors. 16G or 20G is what I recomend.


C

Would you care to elabarate? I'm curious here!

Thanks
Ferraz is offline   Reply With Quote
Old 06-22-2010, 02:16 PM   #68
Phatron
Scooby Guru
 
Member#: 36033
Join Date: Apr 2003
Chapter/Region: SCIC
Location: Tuning Lab
Vehicle:
CEO PhatBottiTuning
2006 STi GTX3582 + Meth

Default

With the big 16g and being able to setup a 20g in so many ways.....the 18g basically has no place.

a big 16g is 38-40 lb/min

a 20g is 44 lb/min

and you can setup a 20g in any of these configs

2.4" inlet td05 7cm
2.4" inlet td05 8cm
3.0" inlet td05 7cm
3.0" inlet td05 8cm

2.4" inlet td06 7cm
2.4" inlet td06 8cm
3.0" inlet td06 7cm
3.0" inlet td06 8cm

basically you can get any 18g configuration power curve by using a 20g
Phatron is offline   Reply With Quote
Old 06-22-2010, 02:31 PM   #69
Ferraz
Scooby Specialist
 
Member#: 173553
Join Date: Mar 2008
Chapter/Region: International
Location: Sao Paulo
Vehicle:
1996 Civic VTi
Dark blue

Default

^^ Thanks for that! I think with all the talk about 20Gs blowing trannys and engines, I got scared of the 20G


Thanks again!
Ferraz is offline   Reply With Quote
Old 06-22-2010, 04:59 PM   #70
rexblake
Scooby Specialist
 
Member#: 178426
Join Date: Apr 2008
Location: FoCo
Vehicle:
2010 S4
Gray

Default

Since ya all are looking for info:

Highest peak numbers I've ever seen on a 68hta, with E85

http://forums.nasioc.com/forums/show...744361&page=51

Second post down the page. 411 at the wheel. Again, I contribute this completely to a high reading dyno, but hey, there's a dyno of it.

As for pump gas, I can't seem to find the thread I'm looking for. Some guy that was running a 68hta on a built (I think) 2.1L, had issues, Dom put on a 10cm hotside, retuned, gained 30whp on pump. Although, it still looked like it was losing power by the 8k redline. Ring any bells? Someone point me in the right direction?
rexblake is offline   Reply With Quote
Old 06-22-2010, 05:11 PM   #71
scoobystas
Scooby Specialist
 
Member#: 26568
Join Date: Oct 2002
Chapter/Region: NESIC
Location: Brighton, Mass
Vehicle:
2003 Yellow Bugeye
Version 8-Vf37

Default

Quote:
Originally Posted by Phatron View Post
With the big 16g and being able to setup a 20g in so many ways.....the 18g basically has no place.

a big 16g is 38-40 lb/min

a 20g is 44 lb/min

and you can setup a 20g in any of these configs

2.4" inlet td05 7cm
2.4" inlet td05 8cm
3.0" inlet td05 7cm
3.0" inlet td05 8cm

2.4" inlet td06 7cm
2.4" inlet td06 8cm
3.0" inlet td06 7cm
3.0" inlet td06 8cm

basically you can get any 18g configuration power curve by using a 20g
benefit of the 3" inlet?

So lets say your looking to lose minimal spool buy stepping up up to a 20g from a vf turbo. You decide you want the smaller compressor td05 and the smaller exhaust housing 7cm, but then why would you get a 3" inlet? Just wondering why the option is there and if and where its wise to go 3" over 2.4".
scoobystas is offline   Reply With Quote
Old 06-22-2010, 05:31 PM   #72
motocooney
Scooby Specialist
 
Member#: 176235
Join Date: Apr 2008
Chapter/Region: MWSOC
Vehicle:
09 Mazdaspeed3

Default

Quote:
Originally Posted by spx19811 View Post
i've got a 8 cm and it runs like a raped date
What

How would you know how a "raped date" runs!!!

You know that's not right...don't you.

The saying is "like a raped ape"

That's so ****ing hilarious. haha
motocooney is offline   Reply With Quote
Old 06-22-2010, 05:31 PM   #73
Phatron
Scooby Guru
 
Member#: 36033
Join Date: Apr 2003
Chapter/Region: SCIC
Location: Tuning Lab
Vehicle:
CEO PhatBottiTuning
2006 STi GTX3582 + Meth

Default

not really a big thing unless you couple it with a 3" APS Inlet.....

getting rid of any restrictions before the compressor will help it operate better/easy/more efficiently.....
Phatron is offline   Reply With Quote
Old 06-22-2010, 05:48 PM   #74
scoobystas
Scooby Specialist
 
Member#: 26568
Join Date: Oct 2002
Chapter/Region: NESIC
Location: Brighton, Mass
Vehicle:
2003 Yellow Bugeye
Version 8-Vf37

Default

just did some minor research and it looks like the 3" inlet tapers to a 2.4" right at the inducer. The wheel inducer is the same size whether you go 2.4" or 3". With the 3", it looks like you "have" to delete the tgvs and fitment becomes a hassle.

so on a 2.0l it looks like the td05 20g 8cm^2 would be the best for daily driving, you get decent spool up and the top end.
scoobystas is offline   Reply With Quote
Old 06-22-2010, 06:32 PM   #75
LittleBlueGT
Scooby Specialist
 
Member#: 96204
Join Date: Sep 2005
Chapter/Region: W. Canada
Location: Winnipeg
Vehicle:
2013 STI GR
White

Default

E85, FP68HTA, original 7 cm housing, IWG

Not my car, my 68HTA doesn't respond near as good as this one.

Code:
Load RPM Timing KnockSum MRP g/s MAFv WGDC throttle LC-1
0000   0.68   1915   31.5   3   -5.50   21.60   2.14   88.63   13.7    14.55
0150   0.68   1940   32.0   3   -5.49   21.69   2.12   88.63   13.7    14.54
0330   1.23   2018   35.5   3   00.52   46.85   2.68   88.63   100     14.57
0480   1.35   2028   34.0   3   00.88   45.09   2.74   88.63   100     14.95
0681   1.40   2096   33.0   3   01.37   49.46   2.72   88.63   100     14.98
0861   1.47   2142   32.0   3   01.87   52.82   2.76   88.63   100     13.45
1041   1.53   2188   30.5   3   02.40   56.83   2.80   88.63   100     12.95
1212   1.59   2222   30.0   3   02.91   60.54   2.82   88.63   100     12.45
1362   1.67   2282   29.0   3   03.49   65.59   2.92   88.63   100     12.25
1552   1.73   2350   28.5   3   04.18   69.86   3.02   88.63   100     12.04
1722   1.83   2409   27.5   3   04.88   75.43   3.02   88.63   100     11.88
1893   1.92   2477   26.5   3   05.64   80.74   3.10   88.63   100     11.42
2083   1.99   2563   25.0   3   06.67   86.47   3.18   88.63   100     11.32
2253   2.06   2581   24.0   3   07.58   94.43   3.36   88.63   100     11.01
2443   2.21   2722   22.0   3   08.92   105.8   3.46   88.63   100     10.97
2614   2.43   2826   20.5   3   10.68   120.1   3.54   88.63   100     10.94
2804   2.68   2922   20.0   3   12.74   138.7   3.72   88.63   100     10.94
2974   3.10   3046   19.5   3   15.29   162.9   3.84   87.45   100     10.98
3164   3.49   3181   19.0   3   18.68   189.7   4.04   72.94   100     10.72
3335   3.73   3318   18.5   3   21.56   213.3   4.22   65.49   100     10.64
3505   3.86   3434   18.5   3   23.06   221.5   4.28   62.75   100     10.75
3665   3.72   3604   19.0   3   22.89   221.3   4.22   62.75   100     10.95
3845   3.68   3749   19.0   3   22.46   230.7   4.32   63.92   100     11.29
4016   3.65   3906   19.5   3   22.24   238.6   4.38   66.27   100     11.41
4186   3.72   4051   19.5   3   22.69   251.4   4.48   67.06   100     11.39
4356   3.83   4208   19.5   3   23.13   272.1   4.54   67.06   100     11.44
4546   3.91   4294   19.5   3   23.13   281.2   4.60   67.45   100     11.54
4717   3.86   4497   19.5   3   22.80   288.1   4.62   69.02   100     11.29
4907   3.88   4630   20.0   3   22.85   301.8   4.68   70.59   100     11.23
5077   3.91   4864   20.0   3   22.89   314.3   4.70   70.98   100     11.26
5267   3.88   4928   20.5   3   22.89   322.3   4.74   72.16   100     11.2
5438   3.84   5084   21.0   3   23.04   323.9   4.76   73.33   100     11.23
5628   3.76   5204   21.0   3   23.07   325.8   4.78   73.73   100     11.33
5798   3.68   5341   21.5   3   22.92   328.1   4.80   73.33   100     11.39
5968   3.60   5525   21.5   3   22.63   329.7   4.80   73.33   100     11.42
6159   3.53   5570   22.0   3   22.23   329.8   4.80   73.73   100     11.5
6339   3.47   5808   22.5   3   21.83   329.8   4.80   76.08   100     11.55
6539   3.40   5912   23.5   3   21.81   331.1   4.80   77.65   100     11.51
6729   3.33   6071   24.0   3   21.87   332.5   4.82   79.61   100     11.44
6890   3.27   6184   24.5   3   21.90   332.7   4.84   80.00   100     11.55
7090   3.21   6306   25.0   3   21.82   333.4   4.84   80.39   100     11.55
7250   3.15   6406   25.5   3   21.97   333.9   4.84   80.78   100     11.48
7451   3.10   6456   25.5   3   21.96   334.3   4.84   80.78   100     11.5
7641   3.06   6582   26.0   3   21.97   335.5   4.86   80.78   100     11.45
7831   3.01   6671   26.0   3   22.05   335.2   4.84   80.78   100     11.42
7991   2.97   6779   26.5   3   22.05   334.8   4.86   81.18   100     11.47
8192   2.92   6885   27.5   3   22.13   334.3   4.84   80.78   100     11.41
LittleBlueGT is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
06 WRX Blouch EVO 3 w/ 8cm vs TD05-18G XT which one? konmann Factory 2.5L Turbo Powertrain (EJ Series Factory 2.5L Turbo) 12 06-14-2010 12:39 PM
VF39 vs HTA68 vs Blouch TD0518G 8 cm dmcutter Factory 2.5L Turbo Powertrain (EJ Series Factory 2.5L Turbo) 103 03-11-2010 01:41 PM
FP 18g vs Blouch 18g futurestiguy Factory 2.5L Turbo Powertrain (EJ Series Factory 2.5L Turbo) 46 04-14-2009 06:22 PM
what has more top end, pe1820,or 1825? kenlee Factory 2.5L Turbo Powertrain (EJ Series Factory 2.5L Turbo) 15 06-09-2004 12:34 AM
S-AFC vs. Chip which has more hp gains? Cusco Normally Aspirated Powertrain 0 01-30-2002 07:38 AM

All times are GMT -4. The time now is 10:38 PM.


Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Powered by Searchlight © 2024 Axivo Inc.
Copyright ©1999 - 2019, North American Subaru Impreza Owners Club, Inc.

As an Amazon Associate I earn from qualifying purchases.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission
Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.