What gaskets to use on jdm Ej20g

Rikshaman · 07-04-2006, 05:20 AM

im about to pickup a jdm ej20g, was wondering what gaskets i should change and any preventive maintenance that i should do while the motor is still out of the car. Where would i get these parts, or are the shared with the USDM ej205?

* Registered users of the site do not see these ads.

Jaxx · 07-04-2006, 01:15 PM

i asked this question of dave a rallispec ~3 years ago
rear main
cam seals (lot of work?)
new oil pan/pickup -if its bent
water pump+gasgets
timing belt
belt tensioner (use the 93 impreza 1.8 part)

there was a guy selling complete rebuyild kits on ebay from england . they were resonable and actualy showed up

Zora · 07-10-2006, 01:59 PM

jaxx, what are "rear main" gaskets? Also, what about the gasket b/w the turbo and the downpipe?

Matt Monson · 07-10-2006, 07:02 PM

rear main= crank seal...

subbyspeed · 07-10-2006, 10:50 PM

Quote:

Originally Posted by Matt Monson

rear main= crank seal...

on the back side of the engine (flywheel side)

07-04-2006, 05:20 AM	#1
Rikshaman Scooby Newbie Member#: 90817 Join Date: Jul 2005	What gaskets to use on jdm Ej20g im about to pickup a jdm ej20g, was wondering what gaskets i should change and any preventive maintenance that i should do while the motor is still out of the car. Where would i get these parts, or are the shared with the USDM ej205? * Registered users of the site do not see these ads.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What Alternator to use on JDM V.8 STI motor?	John2.5RS	Electrical & Lighting	0	10-22-2007 05:20 PM
What coils to use with an ej20g	snowjob	Subaru Conversions	11	05-13-2005 02:26 PM
What EM to use with JDM STI engine?	boosted20	Engine Management & Tuning	6	04-24-2005 10:57 AM
Anyone know what cleaner to use on wood kitchen cabinets that won't bork the wood?	Cjchaps	Off-Topic	4	11-17-2004 04:52 PM
what lube to use on this part?	nhluhr	Brakes, Steering & Suspension	13	08-06-2004 04:42 PM

07-04-2006, 01:15 PM	#2
Jaxx NASIOC Supporter Member#: 177 Join Date: Aug 1999 Chapter/Region: NWIC Location: Boise,Idaho,USA Vehicle: The 93 Imp W/EJ20K flat black	i asked this question of dave a rallispec ~3 years ago rear main cam seals (lot of work?) new oil pan/pickup -if its bent water pump+gasgets timing belt belt tensioner (use the 93 impreza 1.8 part) there was a guy selling complete rebuyild kits on ebay from england . they were resonable and actualy showed up

07-10-2006, 01:59 PM	#3
Zora Scooby Newbie Member#: 74712 Join Date: Nov 2004 Chapter/Region: MAIC Location: N. Potomac, MD Vehicle: 1995 Impreza Wagon Crimson Pearl Met.	jaxx, what are "rear main" gaskets? Also, what about the gasket b/w the turbo and the downpipe?

07-10-2006, 07:02 PM	#4
Matt Monson Scooby Guru Member#: 832 Join Date: Jan 2000 Chapter/Region: RMIC Location: Teh Ghetto Garage, CO Vehicle: 99 2.5RS, '85 911 '73 914 and 2012 BRZ	rear main= crank seal...