|11-25-2001, 06:52 PM||#1|
Join Date: Mar 2001
Location: Back to Boostin' in SLC!Vehicle:
more mods coming soon!!
hmmm weird problem with A/F install
I was installing my A/F gauge today on the a pillar mount and found that the wires arent long enough to reach the ECU. Has anyone else ran into this problem. I bought the gauges from Summit by the way. The only wire I have lying around is speaker wire. Would this work if it came down to extending the wires?
Thanks for the help.
MY98 Owners UNITE!
Also I was just curious if I could tap into the power and ground wires on the ECU instead of other methods? I already have an SAFC connected to the ECU so would that be too much going on to the power/ ground wires?
* Registered users of the site do not see these ads.
|11-25-2001, 08:29 PM||#2|
Join Date: May 2001
Location: Carol Stream, ILVehicle:
'01 GC8 Dinged STM
'09 Concours 14 ABS Black
just solder in some more wire...i would get a copper 18-20 guage wire...speaker wire would be allright.
|11-25-2001, 10:21 PM||#4|
Join Date: Jul 1999
Location: San Diego, CAVehicle:
i would only use the signal wire to the ECU (Purple)
if you tack too many things to the ECU it might freakout from the voltage loss
|Thread||Thread Starter||Forum||Replies||Last Post|
|Weird Problem With My Motor||scoobaru_wagon||Factory 2.0L Turbo Powertrain||6||08-15-2005 12:33 PM|
|Weird problem with Perrin Modifieds....||Project Rex STi||Factory 2.5L Turbo Powertrain||7||06-22-2005 10:08 PM|
|Small weird problem with my STI wing...||thsiao||Interior & Exterior Modification||5||04-10-2005 11:34 PM|
|weird problem with throtttle sticking||WRxednEffect||Factory 2.0L Turbo Powertrain||11||01-22-2002 01:49 AM|
|Any weird problems with the Website?||Nick||General Forum Archive||41||01-31-2001 11:53 AM|