Motor blew in my wrx so I bought another 2.0 turbo to replace it and it came with a cut harness. I also live in Pennsylvania and it's already November so it's getting pretty cold up here. I then removed the intake to put the harness on that wasn't cut and now I've run into a problem where I'm not sure if the harness is for this engine or if that was even a thing, or if I just can't find where all the sensors go. I know I'm just asking to get flamed for not being organized and not doing research or anything... but if someone can give me advice your guide me into the right direction, it would be helpful. I tried to draw out a little diagram to get a better view of what I'm dealing with with the harness and intake so here's that.