GrimmSpeed Engine Armor Skid Plate Group Buy

GrimmSpeed · 03-13-2007, 09:46 PM

1/8" NOW SOLD OUT. BEASTLY 3/16" LEFT!!

Get these skid plates out of my living room!

We all know we occasionally screw around in our cars

... so instead of risking destroying your engine by running over rocks, stumps, and/or srt4's, throw on some protection.

Here is what we are going to do folks...we have 8 of these available, 4 at 1/8" and 4 at 3/16".

Pricing Tiers
1/8"
1-2 people 99.99
3 people 94.99
4 people 89.99

3/16"
1-2 people 129.99
3 people 119.99
4 people 109.99

OFFICIAL LIST
1. evolsuby(1/8")
2. EarlQHan (1/8")
3. bajozzy (1/8")
4. STi_fresh (3/16")
5. fastcb (1/8")
6. JENowman (3/16")
7. SonicWRX (3/16")
8. SPIDEYWrX (3/16")

Shipping will be $20 to anywhere in the lower 48 states. International shipping may be offered on a case by case basis. Being this is our 2nd official group buy we have learned something...we will be taking deposits of $40 to hold your spot on the list. These plates have slight scratches on them from the factory, nothing that will affect anything at all...after all, it is a skid plate.

Final pricing will be available at the end and based on number of participants. GB will end on March 30th.

More info:
http://www.grimmspeed.com/engine_armor.php

Here you go you crazy animals..

Justin Grimm
www.grimmspeed.com

* Registered users of the site do not see these ads.

aboothman · 03-14-2007, 02:27 AM

Quote:

Originally Posted by GrimmSpeed

We all know we occasionally screw around in our cars

... so instead of risking destroying your engine by running over rocks, stumps, and/or srt4's, throw on some protection.

LMAO!!

readymix · 03-14-2007, 09:57 PM

These things are hot, I saw them in person at the MNSubaru ice races. Definately a solid piece.

socrates42 · 03-15-2007, 02:27 AM

Very nice! Do you have a pic of it on the car from directly underneath? (like on a lift?)

hawke w · 03-15-2007, 03:55 AM

do these have more clearance than the stock splash guard? i have a set of headers that wont allowe me to run the oem part.

kennyvb · 03-15-2007, 11:05 AM

do you need the stock subframe to install these?

GrimmSpeed · 03-15-2007, 12:18 PM

Quote:

Originally Posted by socrates42

Very nice! Do you have a pic of it on the car from directly underneath? (like on a lift?)

funny story..car blew up from a bad bearing about a week after i put the prototype on so i didnt personally get a pic of it(ok not funny story). Bunch of locals have them so i'll get a pic from them. there is a pic of the PRE-prototype mock up on the website but its a bad quality pic so you really cant see much.

Quote:

Originally Posted by hawke w

do these have more clearance than the stock splash guard? i have a set of headers that wont allowe me to run the oem part.

i havent looked at a stock splash guard for soo long, i believe it is the same though. it is a straight line from the front subframe to the bolts on the middle of the crossmember.

Quote:

Originally Posted by kennyvb

do you need the stock subframe to install these?

if the bolts are in the same position as the stock subframe then you can.

i have also responded to everyones pm's. Thanks guys!

evolsuby · 03-15-2007, 05:32 PM

Put me down for it! Do we need to send our deposits via paypal?

GrimmSpeed · 03-16-2007, 01:03 AM

Quote:

Originally Posted by evolsuby

Put me down for it! Do we need to send our deposits via paypal?

yep, paypal works. would you like to put on the 1/8 or 3/16 list?

nxwrxfx · 03-16-2007, 09:33 AM

Wow those look nice!
I was debating on getting a Beatrush underpanel until I stumbled across this thread.

Would you do me a favor though and post a better pic of your underpanel installed? I want to get a better view of how wide yours is in respect to the wheels and subframe edges. I also need a better view of where the bolt holes line up as I too don't have a stock subframe.

My e-mail is "nxwrxfx@gmail.com" if that helps!

GrimmSpeed · 03-19-2007, 09:58 AM

nxwrxfx...here are some pics that a local guy took of his car with the GS skidplate....

GrimmSpeed · 03-19-2007, 11:19 PM

EarlQHan you have been added to the 1/8 list. thanks!

SonicWRX · 03-20-2007, 10:47 AM

What are the weights for each?

GrimmSpeed · 03-20-2007, 11:26 PM

Quote:

Originally Posted by SonicWRX

What are the weights for each?

7.5lbs for the 1/8 and i dont have an exact weight for the 3/16 but i'd guess around 10 or so.

bajozzy you've been added to the list.

STi_Fresh · 03-20-2007, 11:49 PM

do you still have any of these laying around ?

GrimmSpeed · 03-21-2007, 01:21 PM

Quote:

Originally Posted by STi_Fresh

do you still have any of these laying around ?

yeah we still have some laying around...

GrimmSpeed · 03-21-2007, 03:00 PM

STi_fresh has been added to the list.

STi_Fresh · 03-22-2007, 12:23 AM

cant wait no more rocks denting down pipes the canyon can be tuff

GrimmSpeed · 03-22-2007, 09:42 PM

canyon runs...lucky

GrimmSpeed · 03-23-2007, 10:12 AM

fastcb...added you to the list.

Ty. · 03-24-2007, 03:33 AM

Nice piece justin!

bajozzy · 03-24-2007, 03:14 PM

If the 1/8 is sold out can I just pay the remainder of what I owe and you can ship it out or do I have to wait untill the 30 th

GrimmSpeed · 03-25-2007, 03:20 AM

Quote:

Originally Posted by bajozzy

If the 1/8 is sold out can I just pay the remainder of what I owe and you can ship it out or do I have to wait untill the 30 th

i'd like to just hold off and send everything out at the same time with the GB is over. if that works for you i'd like to stick to that...if you are in dire need of it we can work something out.

bajozzy · 03-26-2007, 08:55 AM

Sounds Good .. No worries..

GrimmSpeed · 03-27-2007, 07:44 PM

Quote:

Originally Posted by bajozzy

Sounds Good .. No worries..

thanks for understanding.

03-13-2007, 09:46 PM	#1
GrimmSpeed NASIOC Vendor Vendor Sales Rating: (192) Member#: 136396 Join Date: Jan 2007 Chapter/Region: MWSOC Location: Minneapolis, MN Vehicle: 2012 wrx white	GrimmSpeed Engine Armor Skid Plate Group Buy 1/8" NOW SOLD OUT. BEASTLY 3/16" LEFT!! Get these skid plates out of my living room! We all know we occasionally screw around in our cars ... so instead of risking destroying your engine by running over rocks, stumps, and/or srt4's, throw on some protection. Here is what we are going to do folks...we have 8 of these available, 4 at 1/8" and 4 at 3/16". Pricing Tiers 1/8" 1-2 people 99.99 3 people 94.99 4 people 89.99 3/16" 1-2 people 129.99 3 people 119.99 4 people 109.99 OFFICIAL LIST 1. evolsuby(1/8") 2. EarlQHan (1/8") 3. bajozzy (1/8") 4. STi_fresh (3/16") 5. fastcb (1/8") 6. JENowman (3/16") 7. SonicWRX (3/16") 8. SPIDEYWrX (3/16") Shipping will be $20 to anywhere in the lower 48 states. International shipping may be offered on a case by case basis. Being this is our 2nd official group buy we have learned something...we will be taking deposits of $40 to hold your spot on the list. These plates have slight scratches on them from the factory, nothing that will affect anything at all...after all, it is a skid plate. Final pricing will be available at the end and based on number of participants. GB will end on March 30th. More info: http://www.grimmspeed.com/engine_armor.php Here you go you crazy animals.. Justin Grimm www.grimmspeed.com * Registered users of the site do not see these ads. Last edited by GrimmSpeed; 03-31-2007 at 08:34 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Subtle Solutions Skid Plate Group Buy!	Duderotomy	Forester Forum	0	10-06-2008 11:45 PM
Rally Armor Skid Plates in stock	AZP Installs	Tri-State Area Forum	20	04-07-2004 12:30 AM
Rally Armor Skid Plate Possibility for Legacy/Outbacks...	AZP Installs	Legacy Forum	18	01-20-2004 09:44 AM
FS: <RS> Rally Armor Skid Plate, OEM Rear diff protector new	munkis	Tri-State Area Forum	0	12-30-2003 08:18 PM
Primitive Racing Skid Plate Group Buy	Firewire	Vancouver Impreza Club Forum -- VIC	18	07-26-2001 01:20 AM

03-14-2007, 09:57 PM	#3
readymix Scooby Newbie Member Sales Rating: (1) Member#: 59839 Join Date: Apr 2004 Chapter/Region: MWSOC Location: Cottage Grove, MN Vehicle: 2004 WRX Platinum Silver	These things are hot, I saw them in person at the MNSubaru ice races. Definately a solid piece.

03-15-2007, 02:27 AM	#4
socrates42 Scooby Specialist Member Sales Rating: (4) Member#: 7747 Join Date: Jun 2001 Chapter/Region: NESIC Location: DC Metro Vehicle: 2004 WRX 5door 5spd 08 E90 M3	Very nice! Do you have a pic of it on the car from directly underneath? (like on a lift?)

03-15-2007, 03:55 AM	#5
hawke w Scooby Newbie Member Sales Rating: (0) Member#: 67993 Join Date: Aug 2004 Location: hawaii Vehicle: 2004 sti blue	do these have more clearance than the stock splash guard? i have a set of headers that wont allowe me to run the oem part.

03-15-2007, 11:05 AM	#6
kennyvb Scooby Guru Member Sales Rating: (166) Member#: 70234 Join Date: Sep 2004 Chapter/Region: Tri-State Location: NYC Vehicle: MY86 BMW E30 325 SCIC/NWIC tranplant (-_-)	do you need the stock subframe to install these?

03-15-2007, 05:32 PM	#8
evolsuby Scooby Newbie Member Sales Rating: (1) Member#: 132609 Join Date: Nov 2006 Chapter/Region: TXIC Location: Austin, Tx Vehicle: 2004 WRX WRB	Put me down for it! Do we need to send our deposits via paypal?

03-16-2007, 09:33 AM	#10
nxwrxfx Scooby Specialist Member Sales Rating: (65) Member#: 92011 Join Date: Jul 2005 Chapter/Region: TXIC Location: ATX Vehicle: 2002 A monster... Is coming...	Wow those look nice! I was debating on getting a Beatrush underpanel until I stumbled across this thread. Would you do me a favor though and post a better pic of your underpanel installed? I want to get a better view of how wide yours is in respect to the wheels and subframe edges. I also need a better view of where the bolt holes line up as I too don't have a stock subframe. My e-mail is "nxwrxfx@gmail.com" if that helps!

03-19-2007, 09:58 AM	#11
GrimmSpeed NASIOC Vendor Vendor Sales Rating: (192) Member#: 136396 Join Date: Jan 2007 Chapter/Region: MWSOC Location: Minneapolis, MN Vehicle: 2012 wrx white	nxwrxfx...here are some pics that a local guy took of his car with the GS skidplate....

03-19-2007, 11:19 PM	#12
GrimmSpeed NASIOC Vendor Vendor Sales Rating: (192) Member#: 136396 Join Date: Jan 2007 Chapter/Region: MWSOC Location: Minneapolis, MN Vehicle: 2012 wrx white	EarlQHan you have been added to the 1/8 list. thanks!

03-20-2007, 10:47 AM	#13
SonicWRX Scooby Specialist Member Sales Rating: (23) Member#: 24464 Join Date: Sep 2002 Chapter/Region: MWSOC Location: Cincinnasti Vehicle: 2007 WRX STi (SWP) Surgeline Tuned	What are the weights for each?

03-20-2007, 11:49 PM	#15
STi_Fresh Scooby Newbie Member Sales Rating: (0) Member#: 143898 Join Date: Mar 2007 Location: Los Angeles CA Vehicle: 2005 Subaru wrx STi Black	do you still have any of these laying around ?

03-21-2007, 03:00 PM	#17
GrimmSpeed NASIOC Vendor Vendor Sales Rating: (192) Member#: 136396 Join Date: Jan 2007 Chapter/Region: MWSOC Location: Minneapolis, MN Vehicle: 2012 wrx white	STi_fresh has been added to the list.

03-22-2007, 12:23 AM	#18
STi_Fresh Scooby Newbie Member Sales Rating: (0) Member#: 143898 Join Date: Mar 2007 Location: Los Angeles CA Vehicle: 2005 Subaru wrx STi Black	cant wait no more rocks denting down pipes the canyon can be tuff

03-22-2007, 09:42 PM	#19
GrimmSpeed NASIOC Vendor Vendor Sales Rating: (192) Member#: 136396 Join Date: Jan 2007 Chapter/Region: MWSOC Location: Minneapolis, MN Vehicle: 2012 wrx white	canyon runs...lucky

03-23-2007, 10:12 AM	#20
GrimmSpeed NASIOC Vendor Vendor Sales Rating: (192) Member#: 136396 Join Date: Jan 2007 Chapter/Region: MWSOC Location: Minneapolis, MN Vehicle: 2012 wrx white	fastcb...added you to the list.

03-24-2007, 03:33 AM	#21
Ty. * Banned * Member Sales Rating: (0) Member#: 144256 Join Date: Mar 2007 Location: MN	Nice piece justin!

03-24-2007, 03:14 PM	#22
bajozzy Scooby Specialist Member Sales Rating: (37) Member#: 137556 Join Date: Jan 2007 Chapter/Region: BAIC Location: Westwood Ca, Vehicle: 2011 STI Sedan OBP	If the 1/8 is sold out can I just pay the remainder of what I owe and you can ship it out or do I have to wait untill the 30 th

03-26-2007, 08:55 AM	#24
bajozzy Scooby Specialist Member Sales Rating: (37) Member#: 137556 Join Date: Jan 2007 Chapter/Region: BAIC Location: Westwood Ca, Vehicle: 2011 STI Sedan OBP	Sounds Good .. No worries..