emanage blue on BE

lgt2000 · 08-27-2007, 12:40 AM

has anybody installed an emanage blue on a BE legacy, if so please give me any info you can, if not, I just need the pinouts to the stock ecu so that I know where to hook up each wire. thanks.

* Registered users of the site do not see these ads.

lgt2000 · 08-27-2007, 10:40 PM

Well since I couldnt find anything anywhere I looked at some 2.5RS diagrams and came up with the following, since the RS is MAF the last two read MAF to E-Manage and MAF to ECU, I assumed i could just change these to MAP, is my assumption correct. I made up this chart so this could be useful for future emanage users.

Patrick Olsen · 08-28-2007, 02:04 AM

Quote:

Originally Posted by lgt2000

since the RS is MAF the last two read MAF to E-Manage and MAF to ECU, I assumed i could just change these to MAP, is my assumption correct.

(1) I would be stunned if that assumption is correct.
(2) You said the pinout you got is from a 2.5RS - what year? There are MAP-equipped 2.5RS's that should have the same pinouts as your Legacy. Look here.

Pat Olsen

lgt2000 · 08-28-2007, 02:08 AM

I apologize, the pinout is from a WRX, it is the offical guide from GReddy, found here http://mohdparts.com/emanage/install/wrx/index.html

I am pretty sure that everything is correct except for that last one, which i am pretty sure is incorrect hehe

lgt2000 · 08-28-2007, 10:42 PM

it seems my original assumption was correct, I found instructions for an SRT-4 which is also MAP based and they just used the signal from the MAP on the last two connections

rougeben83 · 09-04-2007, 09:42 AM

PM me your email and I can send you the 6 pages of wiring diagrams for the ECU.

08-27-2007, 12:40 AM	#1
lgt2000 NASIOC Supporter Member#: 140073 Join Date: Feb 2007 Chapter/Region: South East Location: NC Vehicle: 2005 LGT Red	emanage blue on BE has anybody installed an emanage blue on a BE legacy, if so please give me any info you can, if not, I just need the pinouts to the stock ecu so that I know where to hook up each wire. thanks. * Registered users of the site do not see these ads.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
emanage blue on MY00 Legacy	lgt2000	Legacy Forum	6	08-08-2007 11:46 AM
Brand New Greddy Emanage Blue w/ support tools & USB	B00st3dWRX	SCIC Private Classifieds	2	08-01-2007 05:32 PM
FS: NC Greddy emanage blue	bkcomm	South East Region Private Classifieds	6	07-30-2007 10:38 AM
eManage Blue & injector harness	mxpunk	Normally Aspirated with bolt-on Forced Induction Powertrain	7	05-10-2007 07:17 PM
F.S. Greddy Emanage Blue	boosted lude	Engine/Power/Exhaust	1	12-19-2006 12:11 AM

08-27-2007, 10:40 PM	#2
lgt2000 NASIOC Supporter Member#: 140073 Join Date: Feb 2007 Chapter/Region: South East Location: NC Vehicle: 2005 LGT Red	Well since I couldnt find anything anywhere I looked at some 2.5RS diagrams and came up with the following, since the RS is MAF the last two read MAF to E-Manage and MAF to ECU, I assumed i could just change these to MAP, is my assumption correct. I made up this chart so this could be useful for future emanage users.

08-28-2007, 02:08 AM	#4
lgt2000 NASIOC Supporter Member#: 140073 Join Date: Feb 2007 Chapter/Region: South East Location: NC Vehicle: 2005 LGT Red	I apologize, the pinout is from a WRX, it is the offical guide from GReddy, found here http://mohdparts.com/emanage/install/wrx/index.html I am pretty sure that everything is correct except for that last one, which i am pretty sure is incorrect hehe

08-28-2007, 10:42 PM	#5
lgt2000 NASIOC Supporter Member#: 140073 Join Date: Feb 2007 Chapter/Region: South East Location: NC Vehicle: 2005 LGT Red	it seems my original assumption was correct, I found instructions for an SRT-4 which is also MAP based and they just used the signal from the MAP on the last two connections

09-04-2007, 09:42 AM	#6
rougeben83 Scooby Guru Member#: 115154 Join Date: May 2006 Chapter/Region: MWSOC Location: NYC Vehicle: 2003 Legacy L Turbo silver	PM me your email and I can send you the 6 pages of wiring diagrams for the ECU.