('08-'10) 2009 Outback Sport (pics)... - Page 64

scrappydoo225 · 02-26-2012, 11:13 PM

Quote:

Originally Posted by DirknJirkn13

I've never understood yellow fogs and why people think it looks good, but that's just me. I like the red inside but only on the dash and doors, not the center console. Where did you get the tape?

I have yellow fogs but I did the nokya yellow bulbs. The yellow works better in ****ty weather vs the regular white beam.

* Registered users of the site do not see these ads.

Stewart McKenzie · 02-29-2012, 01:23 PM

If anyone's interested, I have the front and back seat covers/headrest covers from a 2010 OBS.... in BLACK. Taken off an OBS with 90 miles on the clock, so essentially BRAND NEW. I was going to do an interior swap on my car (hated the tan interior), but it's grown on me, so I've decided to sell them. I guess I'll do $100 shipped to the lower 48 for them. I think they'll fit any 08+ 2.5i or OBS, but I can't be 100% sure that 2.5i and OBS seats are the same?

Geerolla · 02-29-2012, 04:28 PM

They are the same.

Wagonguy98 · 03-01-2012, 01:22 AM

Here's my 08

theoutbackdream · 03-02-2012, 02:56 PM

Looks good!

Well today I got my vinyl in, and hoping to do a red tailight mod, carbon fiber center plate, and carbon fiber eyelids. Maybe a few more if extra pieces permit me too. I will post pics as soon as I'm done with it.

QCMP · 03-02-2012, 10:46 PM

Heres my 2011 outback sport after installing Fortune 500 coilovers last week. Still need to lower the front another .5" or so to get the look I want.

50 by QCMP, on Flickr

49 by QCMP, on Flickr

I love the coilovers! They are a lot nicer of a ride than the megan coilovers on my buddies car. Worth every penny!

theoutbackdream · 03-02-2012, 11:04 PM

Here are the completed vinyls!
Red Overlays, looks better IMO.

Center console Carbon Fibered, looks better with the interior.

Last, the Carbon Fiber Eyelid.

NineBreaker · 03-04-2012, 12:07 AM

Quote:

Originally Posted by QCMP

Heres my 2011 outback sport after installing Fortune 500 coilovers last week. Still need to lower the front another .5" or so to get the look I want.

I love the coilovers! They are a lot nicer of a ride than the megan coilovers on my buddies car. Worth every penny!

How's the noise(if any)? I've heard they are kinda clunky.

QCMP · 03-04-2012, 02:23 PM

They aren't noisy at all. The only noise you get is the car rattling after hard bumps(that's any car). The ride really isn't as bad as I
Thought it would be. I went with 7k springs front and rear because I got the rallitek sways as well. Turns are finally fun and predictable!

doc4008 · 03-04-2012, 04:03 PM

finally got around to finishing the emblems, and titnitng my tail lights got a couple more mods in the garage just need the time to do

them.

and the front

theoutbackdream · 03-04-2012, 06:18 PM

Looks good...

BTW, Im planning to do a Carbon Fiber Gas tank cover.. Opinions and thoughts..?

doc4008 · 03-04-2012, 06:31 PM

thanks, if you go carbon fiber extiror, make sure you have a little more then just the gas cover, like a wing, gas cover, and side spats something like that would look very good

imp2.5wag · 03-04-2012, 07:41 PM

Quote:

Originally Posted by doc4008

finally got around to finishing the emblems, and titnitng my tail lights got a couple more mods in the garage just need the time to do them.

and the front

How hard was it tinting your tails?

theoutbackdream · 03-04-2012, 09:23 PM

Quote:

Originally Posted by doc4008

thanks, if you go carbon fiber extiror, make sure you have a little more then just the gas cover, like a wing, gas cover, and side spats something like that would look very good

Ah alright thanks. Guess I wont be doing that then, since I have only a bit of CF left to mess around with. lol

Quote:

Originally Posted by imp2.5wag

How hard was it tinting your tails?

I used vinyls, and it was a PITA.. Would I do it again. No way.. Next time, I will definitely be using spray can paint. Much easier to do and more permanent apparently.

doc4008 · 03-04-2012, 09:58 PM

here you be buy this at Micheals clutter store (im not responsible if you f' up hahaha this is too easy so party on!!)

then have some fun, im lazy i didnt take off the other lights, so tape the **hit out of everything nothing worng with that even layers my friends

even layers

doc4008 · 03-04-2012, 10:01 PM

it was easy, and rather fun in a sense, also i used a clear coat gloss after everything was done, i didnt sand anything i used a mico fiber towel after it all dried, sort'ev then wiped it down all good

dont forget to clean the lights very well before starting party on still!

doc4008 · 03-04-2012, 10:01 PM

also i used painter's tape forgot to say that

theoutbackdream · 03-04-2012, 10:14 PM

^Why didn't you just remove the Reverse lights (just 2 screws and your golden)? I would've done it that way instead of risk getting red paint everywhere else.

doc4008 · 03-04-2012, 10:14 PM

party on still

doc4008 · 03-04-2012, 10:16 PM

Quote:

Originally Posted by theoutbackdream

^Why didn't you just remove the Reverse lights (just 2 screws and your golden)? I would've done it that way instead of risk getting red paint everywhere else.

oh kiddo, cause its fun being adventrious, im lazy i like trial by error, hahahah projects are fun and spending money is even funner on your car

doc4008 · 03-04-2012, 10:17 PM

im lazy too

theoutbackdream · 03-04-2012, 10:18 PM

Quote:

Originally Posted by doc4008

oh kiddo, cause its fun being adventrious, im lazy i like trial by error, hahahah projects are fun and spending money is even funner on your car

oh.

doc4008 · 03-04-2012, 10:19 PM

btw, your girl is looking good too man, how was it applying all the red tape? and the cf dash add on is pretty nice my friend looks good!

theoutbackdream · 03-04-2012, 10:22 PM

Quote:

Originally Posted by doc4008

btw, your girl is looking good too man, how was it applying all the red tape? and the cf dash add on is pretty nice my friend looks good!

Thanks

Applying the red tape was simple. Just clean surface, and stick on.

I think it has been the best interior mod so far for less than $10. the stock silver dash sticks out and is somewhat of an eyesore when driving. With the CF, seems to blend better.

scrappydoo225 · 03-05-2012, 09:00 AM

heres mine that I had done on saturday, Paint on the top have vinyl on the bottom half and holy cow was it much easier.

QCMP the car looks good!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2009 Impreza Outback Sport rear bumper step pad?	2009OutbackSport	Newbies & FAQs	16	07-12-2011 08:58 AM
FS NH: 2009 Impreza Outback Sport OEM seat covers	Bu11dogg2	Interior/Dressup/Audio & Security	30	07-10-2011 01:28 AM
WTB : GC8, outback sport, 2.5rs HOOD	AMEEN STI	NWIC Private Classifieds	8	06-25-2010 11:49 AM
New 2009 Impreza Outback Sport	2009OutbackSport	Newbies & FAQs	7	08-11-2009 09:24 AM
What's a good deal on a 2009 Outback Sport	zergling	General Community	4	03-31-2009 01:33 AM

02-29-2012, 01:23 PM	#1577
Stewart McKenzie Scooby Newbie Member#: 238873 Join Date: Feb 2010 Chapter/Region: MAIC Location: Round Hill, Virginia Vehicle: 2010 Impreza OBS Newport Blue/Steel Silver	If anyone's interested, I have the front and back seat covers/headrest covers from a 2010 OBS.... in BLACK. Taken off an OBS with 90 miles on the clock, so essentially BRAND NEW. I was going to do an interior swap on my car (hated the tan interior), but it's grown on me, so I've decided to sell them. I guess I'll do $100 shipped to the lower 48 for them. I think they'll fit any 08+ 2.5i or OBS, but I can't be 100% sure that 2.5i and OBS seats are the same?

02-29-2012, 04:28 PM	#1578
Geerolla Scooby Specialist Member#: 264827 Join Date: Nov 2010 Chapter/Region: NWIC Location: WA, USA Vehicle: 2011 2.5i 5D DGM	They are the same.

03-01-2012, 01:22 AM	#1579
Wagonguy98 Scooby Newbie Member#: 183763 Join Date: Jul 2008 Chapter/Region: Tri-State Location: Emmaus(Allentown),PA Vehicle: 2008 OBS SSM	Here's my 08

03-02-2012, 02:56 PM	#1580
theoutbackdream Scooby Specialist Member#: 301179 Join Date: Nov 2011 Chapter/Region: BAIC Location: Mountain View, California Vehicle: 2009 Outback Sport Sage Green Metallic	Looks good! Well today I got my vinyl in, and hoping to do a red tailight mod, carbon fiber center plate, and carbon fiber eyelids. Maybe a few more if extra pieces permit me too. I will post pics as soon as I'm done with it.

03-02-2012, 10:46 PM	#1581
QCMP Scooby Newbie Member#: 289036 Join Date: Jul 2011 Location: Ohio Vehicle: 2005	Heres my 2011 outback sport after installing Fortune 500 coilovers last week. Still need to lower the front another .5" or so to get the look I want. 50 by QCMP, on Flickr 49 by QCMP, on Flickr I love the coilovers! They are a lot nicer of a ride than the megan coilovers on my buddies car. Worth every penny!

03-02-2012, 11:04 PM	#1582
theoutbackdream Scooby Specialist Member#: 301179 Join Date: Nov 2011 Chapter/Region: BAIC Location: Mountain View, California Vehicle: 2009 Outback Sport Sage Green Metallic	Here are the completed vinyls! Red Overlays, looks better IMO. Center console Carbon Fibered, looks better with the interior. Last, the Carbon Fiber Eyelid.

03-04-2012, 02:23 PM	#1584
QCMP Scooby Newbie Member#: 289036 Join Date: Jul 2011 Location: Ohio Vehicle: 2005	They aren't noisy at all. The only noise you get is the car rattling after hard bumps(that's any car). The ride really isn't as bad as I Thought it would be. I went with 7k springs front and rear because I got the rallitek sways as well. Turns are finally fun and predictable!

03-04-2012, 04:03 PM	#1585
doc4008 Scooby Newbie Member#: 293557 Join Date: Sep 2011	finally got around to finishing the emblems, and titnitng my tail lights got a couple more mods in the garage just need the time to do them. and the front

03-04-2012, 06:18 PM	#1586
theoutbackdream Scooby Specialist Member#: 301179 Join Date: Nov 2011 Chapter/Region: BAIC Location: Mountain View, California Vehicle: 2009 Outback Sport Sage Green Metallic	Looks good... BTW, Im planning to do a Carbon Fiber Gas tank cover.. Opinions and thoughts..?

03-04-2012, 06:31 PM	#1587
doc4008 Scooby Newbie Member#: 293557 Join Date: Sep 2011	thanks, if you go carbon fiber extiror, make sure you have a little more then just the gas cover, like a wing, gas cover, and side spats something like that would look very good

03-04-2012, 09:58 PM	#1590
doc4008 Scooby Newbie Member#: 293557 Join Date: Sep 2011	here you be buy this at Micheals clutter store (im not responsible if you f' up hahaha this is too easy so party on!!) then have some fun, im lazy i didnt take off the other lights, so tape the **hit out of everything nothing worng with that even layers my friends even layers

03-04-2012, 10:01 PM	#1591
doc4008 Scooby Newbie Member#: 293557 Join Date: Sep 2011	it was easy, and rather fun in a sense, also i used a clear coat gloss after everything was done, i didnt sand anything i used a mico fiber towel after it all dried, sort'ev then wiped it down all good dont forget to clean the lights very well before starting party on still!

03-04-2012, 10:01 PM	#1592
doc4008 Scooby Newbie Member#: 293557 Join Date: Sep 2011	also i used painter's tape forgot to say that

03-04-2012, 10:14 PM	#1593
theoutbackdream Scooby Specialist Member#: 301179 Join Date: Nov 2011 Chapter/Region: BAIC Location: Mountain View, California Vehicle: 2009 Outback Sport Sage Green Metallic	^Why didn't you just remove the Reverse lights (just 2 screws and your golden)? I would've done it that way instead of risk getting red paint everywhere else.

03-04-2012, 10:14 PM	#1594
doc4008 Scooby Newbie Member#: 293557 Join Date: Sep 2011	party on still

03-04-2012, 10:17 PM	#1596
doc4008 Scooby Newbie Member#: 293557 Join Date: Sep 2011	im lazy too

03-04-2012, 10:19 PM	#1598
doc4008 Scooby Newbie Member#: 293557 Join Date: Sep 2011	btw, your girl is looking good too man, how was it applying all the red tape? and the cf dash add on is pretty nice my friend looks good!

03-05-2012, 09:00 AM	#1600
scrappydoo225 Scooby Specialist Member#: 262933 Join Date: Nov 2010 Chapter/Region: Tri-State Location: King of Prussia PA Vehicle: 2005 Leztastic wagon cayanne red pearl	heres mine that I had done on saturday, Paint on the top have vinyl on the bottom half and holy cow was it much easier. QCMP the car looks good!