Originally Posted by xcdhridr
IIRC, Karen, you have some issues with the diff install? which one(s) are you running?
I'm using the same diffs as Greg is -- MFactory front, Cusco 1.5 rear.
The problem with the front is that it evidently wasn't really designed well. The leaking axle seals that I had at Nationals were a result of the axles not actually fitting into the diff properly, and that was after 4mm or so was milled off the ends. After trying their damnedest to get it to work, IAG finally just sent the assembly down the road to Andrewtech, who also gave up trying to make the '06 axles work and instead just retrofitted '02-'03 axles (which, as Greg pointed out, still need to be milled down ~5mm).
And MFactory will sit there and tell you that this is a "simple fix"
and that the unit was "designed to work in a GC8" to explain all the problems.
Oh well. It's "fixed" now, and I'll have it out at the DC event on Sunday (first event since Nationals), so I'll see how it works (and if I even remember how to drive it).