Bakemono Camber Plate Group Buy 02-07 and 93-01 imprezas - Page 3

Bakemono-Imports · 06-24-2009, 08:01 PM

I have some blotchy blems on mine, but this will give you an idea of the amount of caster you can dial in.

* Registered users of the site do not see these ads.

flukewrx · 06-24-2009, 08:19 PM

Quote:

Originally Posted by Bakemono-Imports

I have some blotchy blems on mine, but this will give you an idea of the amount of caster you can dial in.

Holy Cow!

Totally looking forward to getting these now.

boosterwitchAWD · 06-24-2009, 08:58 PM

Wow, that's awesome. Guessing this would be with coilovers as stock width spring would likely hit the inner fenderwell before getting that much.

I'm buying these because of the flexibility and even though I don't have coilovers for now, when (if) I get them I'll be ready for that crazy caster!

dantastic · 06-25-2009, 05:08 PM

Will these work with KWV3 coils on a GD wagon (GGA)? If so, please PM you paypal addy so I can make a deposit! Thanks!

dantastic · 06-30-2009, 07:17 AM

*bump* for a few more ppl to get to the next price point!

bebemaster · 06-30-2009, 01:36 PM

I'm in pending the answers to the pm you have.

Sleepy Wagon. · 06-30-2009, 02:19 PM

Question, I have a 02 wrx wagon with a "Hellaflush" fitment on there, Im running 18x9 +35 on stock wagon fenders and i have tein flex coils, my question is will these camber plates just be a bolt on thing or is there some custom work to it. Also, will i be able to pull more the -3 camber all around? Camber is the key to making me go lower which im dying to go much lower! So let me know. Thanks.

STi-MAN · 06-30-2009, 03:14 PM

Quote:

Originally Posted by Bakemono-Imports

I have some blotchy blems on mine, but this will give you an idea of the amount of caster you can dial in.

you know thats negative caster. you'll prob have to swap sides to get max positive caster and max negative camber.. still nice option.

sti robot · 07-01-2009, 12:01 AM

bebemaster and I are in.

We are kind of late and slow on making decisions but we are in.

You've got PM

Next price point achieved!

Bakemono-Imports · 07-01-2009, 03:54 AM

Quote:

Originally Posted by STi-MAN

you know thats negative caster. you'll prob have to swap sides to get max positive caster and max negative camber.. still nice option.

Thanks for the input, but its incorrect. In the image I have posted (the driver side camber plate, facing the engine bay), the camber plate allows for the caster to be adjusted from the top towards the rear of the car, which increases the degrees of POSITIVE caster. This will probably better illustrate the point:

Same picture, but states "positive".

sti robot · 07-01-2009, 09:41 AM

update your first post with new price point

!

DZnutz · 07-01-2009, 01:11 PM

hey bakemono... take a look here and let me know if your plates will work for me

http://forums.nasioc.com/forums/show...1729069&page=3

Bakemono-Imports · 07-01-2009, 01:40 PM

I'm leaning towards yes, but do me a favor and measure some things for me. I want to know the width of the shaft where it goes through the spring perch, and the length of how far it goes from the top of the spring perch until it steps in for the first time. Also what is the width of the 2nd step (before the threaded portion).

meowd0r · 07-01-2009, 01:50 PM

Quote:

Originally Posted by STi-MAN

you know thats negative caster. you'll prob have to swap sides to get max positive caster and max negative camber.. still nice option.

No. Try google out before enlightening everyone with your incorrect e-knowledge.

Bakemono-Imports · 07-01-2009, 01:52 PM

Hey, everyone. I know I said today is the last day for the camber plate group buy, but I will be unavailable today to answer questions/PM's that some of you have asked, so I will extend it until tomorrow. When I made the deadline, I wasn't thinking that today was my 2year anniversary with my lady...and I promised her a day at disneyland.

DZnutz · 07-01-2009, 04:11 PM

Quote:

Originally Posted by Bakemono-Imports

I'm leaning towards yes, but do me a favor and measure some things for me. I want to know the width of the shaft where it goes through the spring perch, and the length of how far it goes from the top of the spring perch until it steps in for the first time. Also what is the width of the 2nd step (before the threaded portion).

here you go.

keep in mind that i only have the conical spring perches for the FRONT struts. the rears did not come with any but the ones off the fronts fit. If those same perches are needed for the rear then theyll need to be purchased or made. let me know

PS: the bottom pic may also have some relevant info seeing as how that flat portion of the perch may be too wide for some plates.

flukewrx · 07-01-2009, 04:57 PM

Quote:

Originally Posted by Bakemono-Imports

Hey, everyone. I know I said today is the last day for the camber plate group buy, but I will be unavailable today to answer questions/PM's that some of you have asked, so I will extend it until tomorrow. When I made the deadline, I wasn't thinking that today was my 2year anniversary with my lady...and I promised her a day at disneyland.

Hey, not a problem. Happy Anniversary Trey. Enjoy your day with your lady.

nutcase_sammy · 07-01-2009, 08:42 PM

Ya', have fun man. Our 5 year is coming up quick

sti robot · 07-06-2009, 08:40 AM

Can you give us a very rough estimate for when these will go to the machine shop/when they will be shipped out?

Thanks!

Bakemono-Imports · 07-06-2009, 12:53 PM

Quote:

Originally Posted by sti robot

Can you give us a very rough estimate for when these will go to the machine shop/when they will be shipped out?

Thanks!

The order is in in and the materials have all been ordered. When the materials are all received, I was told it would be a couple weeks.

flukewrx · 07-06-2009, 03:59 PM

Hey Trey, it sounds like a few more people joined in on this group buy looking at a few of the posts. You might want to update the list on the first page.

sti robot · 07-06-2009, 07:13 PM

Quote:

Originally Posted by Bakemono-Imports

The order is in in and the materials have all been ordered. When the materials are all received, I was told it would be a couple weeks.

Cool. No pressure here, just wanting to plan my purchase of the d-specs.

dantastic · 07-06-2009, 10:54 PM

Quote:

Originally Posted by sti robot

Cool. No pressure here, just wanting to plan my purchase of the d-specs.

Well, I'm dying to throw on my new rims, but I need the camber plates to be able to drive on them

Let us know when you start getting them in. I can come by and pick 'em up/test fit, etc.

wrx_driver_2002 · 07-12-2009, 07:43 PM

I posed on RS25 to get in on this but never got a reply. Is it too late I would love a complete set for my GC impreza with Tein coilovers.

d-ta · 07-14-2009, 07:47 PM

would you happen to know if these camber plates are compatible with a koni yellow/ground control coilover setup?

07-01-2009, 12:01 AM	#59
sti robot Scooby Specialist Member Sales Rating: (25) Member#: 110932 Join Date: Mar 2006 Chapter/Region: MAIC Location: iwsti/Bristow, VA Vehicle: 04 sti jbp/gold silver pilot-baby hauler	bebemaster and I are in. We are kind of late and slow on making decisions but we are in. You've got PM Next price point achieved! Last edited by sti robot; 07-01-2009 at 12:23 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-24-2009, 08:01 PM	#51
Bakemono-Imports Vendor Vendor Sales Rating: (2) Member#: 180083 Join Date: May 2008 Chapter/Region: SCIC Location: Redondo Beach, CA/ Suginami-ku Vehicle: 1998 RS/STI/WRC yellow primer for now :(	I have some blotchy blems on mine, but this will give you an idea of the amount of caster you can dial in. * Registered users of the site do not see these ads.

06-24-2009, 08:58 PM	#53
boosterwitchAWD Scooby Newbie Member Sales Rating: (1) Member#: 189967 Join Date: Sep 2008 Chapter/Region: SCIC Location: Southern California Vehicle: 2002 WRX Wagon Aspen White	Wow, that's awesome. Guessing this would be with coilovers as stock width spring would likely hit the inner fenderwell before getting that much. I'm buying these because of the flexibility and even though I don't have coilovers for now, when (if) I get them I'll be ready for that crazy caster!

06-25-2009, 05:08 PM	#54
dantastic Scooby Specialist Member Sales Rating: (13) Member#: 66815 Join Date: Jul 2004 Chapter/Region: SCIC Location: 818-562-626-310 all over fn LA Vehicle: 2005 WRX Wagon CGM	Will these work with KWV3 coils on a GD wagon (GGA)? If so, please PM you paypal addy so I can make a deposit! Thanks!

06-30-2009, 07:17 AM	#55
dantastic Scooby Specialist Member Sales Rating: (13) Member#: 66815 Join Date: Jul 2004 Chapter/Region: SCIC Location: 818-562-626-310 all over fn LA Vehicle: 2005 WRX Wagon CGM	bump for a few more ppl to get to the next price point!

06-30-2009, 01:36 PM	#56
bebemaster Scooby Newbie Member Sales Rating: (0) Member#: 111687 Join Date: Apr 2006 Chapter/Region: MAIC Location: waldorf, md Vehicle: 2005 wrx wagon black	I'm in pending the answers to the pm you have.

06-30-2009, 02:19 PM	#57
Sleepy Wagon. Scooby Specialist Member Sales Rating: (10) Member#: 132498 Join Date: Nov 2006 Chapter/Region: SCIC Location: Lost Angels/City of Flushness. Vehicle: 02 G wagon/WFC#102 usVERSUSthem Krew!	Question, I have a 02 wrx wagon with a "Hellaflush" fitment on there, Im running 18x9 +35 on stock wagon fenders and i have tein flex coils, my question is will these camber plates just be a bolt on thing or is there some custom work to it. Also, will i be able to pull more the -3 camber all around? Camber is the key to making me go lower which im dying to go much lower! So let me know. Thanks.

07-01-2009, 09:41 AM	#61
sti robot Scooby Specialist Member Sales Rating: (25) Member#: 110932 Join Date: Mar 2006 Chapter/Region: MAIC Location: iwsti/Bristow, VA Vehicle: 04 sti jbp/gold silver pilot-baby hauler	update your first post with new price point !

07-01-2009, 01:11 PM	#62
DZnutz Scooby Specialist Member Sales Rating: (21) Member#: 91837 Join Date: Jul 2005	hey bakemono... take a look here and let me know if your plates will work for me http://forums.nasioc.com/forums/show...1729069&page=3

07-01-2009, 01:40 PM	#63
Bakemono-Imports Vendor Vendor Sales Rating: (2) Member#: 180083 Join Date: May 2008 Chapter/Region: SCIC Location: Redondo Beach, CA/ Suginami-ku Vehicle: 1998 RS/STI/WRC yellow primer for now :(	I'm leaning towards yes, but do me a favor and measure some things for me. I want to know the width of the shaft where it goes through the spring perch, and the length of how far it goes from the top of the spring perch until it steps in for the first time. Also what is the width of the 2nd step (before the threaded portion).

07-01-2009, 01:52 PM	#65
Bakemono-Imports Vendor Vendor Sales Rating: (2) Member#: 180083 Join Date: May 2008 Chapter/Region: SCIC Location: Redondo Beach, CA/ Suginami-ku Vehicle: 1998 RS/STI/WRC yellow primer for now :(	Hey, everyone. I know I said today is the last day for the camber plate group buy, but I will be unavailable today to answer questions/PM's that some of you have asked, so I will extend it until tomorrow. When I made the deadline, I wasn't thinking that today was my 2year anniversary with my lady...and I promised her a day at disneyland.

07-01-2009, 08:42 PM	#68
nutcase_sammy Scooby Newbie Member Sales Rating: (1) Member#: 161262 Join Date: Oct 2007	Ya', have fun man. Our 5 year is coming up quick

07-06-2009, 08:40 AM	#69
sti robot Scooby Specialist Member Sales Rating: (25) Member#: 110932 Join Date: Mar 2006 Chapter/Region: MAIC Location: iwsti/Bristow, VA Vehicle: 04 sti jbp/gold silver pilot-baby hauler	Can you give us a very rough estimate for when these will go to the machine shop/when they will be shipped out? Thanks!

07-06-2009, 03:59 PM	#71
flukewrx Scooby Specialist Member Sales Rating: (7) Member#: 75081 Join Date: Nov 2004 Chapter/Region: BAIC Vehicle: 2003 WRX WRB	Hey Trey, it sounds like a few more people joined in on this group buy looking at a few of the posts. You might want to update the list on the first page.

07-12-2009, 07:43 PM	#74
wrx_driver_2002 Scooby Specialist Member Sales Rating: (15) Member#: 25952 Join Date: Oct 2002 Chapter/Region: NWIC Location: Spanaway, Wa Vehicle: 1995 mpreza brighton w/ "Extras" :-)	I posed on RS25 to get in on this but never got a reply. Is it too late I would love a complete set for my GC impreza with Tein coilovers.

07-14-2009, 07:47 PM	#75
d-ta Scooby Specialist Member Sales Rating: (9) Member#: 131302 Join Date: Nov 2006 Chapter/Region: SWIC Location: 480 Vehicle: 02 WRX Wagon I WRBlue Myself	would you happen to know if these camber plates are compatible with a koni yellow/ground control coilover setup?