Akron/Canton OH: EJ25D bare block and misc. stuff

gonzobutt · 07-12-2009, 06:31 PM

Finally got some pictures of a bunch of stuff I need to get out of the garage. All prices are negotiable, the stuff however is as is. Local pickup is always preferred, but I will ship this stuff anywhere. Buyer pays shipping, along with the 3% paypal. Allright, heres the list of stuff...

2007 EJ25D bare block
This block is a 2.5L DOHC from a 07i Impreza. According to the poster whom I bought it from, it had only 9k miles on it. This is the original post where I got it: http://forums.nasioc.com/forums/show...ighlight=ej25d
The reason its not in my car now is because the 07 DOHC does not actually work with the old 98 DOHC heads. The 07 pistons have sort of a dome shape to them, so it would need heads made specifically for it. We tried to turn the engine by hand when it got here with the heads on, but full rotation was impossible. Im guessing it will be fine with the right heads, but that being said, I cant say that Ive ever seen this engine in action, so I cant really say much as to how well it runs. Asking $350.

engine, front: http://i131.photobucket.com/albums/p...s/DSCI0037.jpg
engine, bottom: http://i131.photobucket.com/albums/p...s/DSCI0038.jpg
engine, bottom#2: http://i131.photobucket.com/albums/p...s/DSCI0039.jpg
engine, top: http://i131.photobucket.com/albums/p...s/DSCI0040.jpg
engine, passenger side: http://i131.photobucket.com/albums/p...s/DSCI0041.jpg
engine, passenger side closeup: http://i131.photobucket.com/albums/p...s/DSCI0042.jpg
engine, drivers side: http://i131.photobucket.com/albums/p...s/DSCI0043.jpg
engine, drivers side closeup: http://i131.photobucket.com/albums/p...s/DSCI0044.jpg
engine, back: http://i131.photobucket.com/albums/p...s/DSCI0046.jpg

1998 DOHC heads
From a 1998 Impreza 2.5 RS. One of the valves(?) on the passenger side has a crack in it...hopefully you can see it in the closeups because Im honestly not sure what the name is of what is actually cracked. These used to run fine, until the engine they used to be on guzzled itself out of oil and has since been laid to rest. Asking $100 for both.

heads, back: http://i131.photobucket.com/albums/p...s/DSCI0027.jpg
heads, front: http://i131.photobucket.com/albums/p...s/DSCI0033.jpg
heads, outside: http://i131.photobucket.com/albums/p...s/DSCI0034.jpg
heads, outside passenger side closeup: http://i131.photobucket.com/albums/p...s/DSCI0035.jpg
heads, outside driver side closeup: http://i131.photobucket.com/albums/p...s/DSCI0036.jpg
heads, inside: http://i131.photobucket.com/albums/p...s/DSCI0028.jpg
heads, inside closeup(of crack): http://i131.photobucket.com/albums/p...s/DSCI0030.jpg

98 Intake Manifold
From a 98 2.5 RS. Everything on it is in good condition. Asking $100.

intake manifold, front: http://i131.photobucket.com/albums/p...s/DSCI0024.jpg
intake manifold, back: http://i131.photobucket.com/albums/p...s/DSCI0025.jpg
intake manifold, bottom: http://i131.photobucket.com/albums/p...s/DSCI0026.jpg

98 2.5 RS Front Bumper and Stock Beam
Did a conversion to the 2000 model bumper cover and the lightweight bumper beam. This is the OBP color. Also have the turn signals and the fog lights with it, along with the foam spacer. Youll notice also that the wires from the backs of the foglights have been cut. You should be able to buy new caps with wires from the dealer, or just splice em up yourself. But the lights all worked when I took them off the car. Asking $125 for all.

front bumper and spacer: http://i131.photobucket.com/albums/p...s/DSCI0178.jpg
with bumper beam: http://i131.photobucket.com/albums/p...s/DSCI0179.jpg
showing back of bumper beam: http://i131.photobucket.com/albums/p...s/DSCI0181.jpg
showing spacer on beam: http://i131.photobucket.com/albums/p...s/DSCI0180.jpg
with turn signals and foglights(full setup): http://i131.photobucket.com/albums/p...s/DSCI0170.jpg
turn signals: http://i131.photobucket.com/albums/p...s/DSCI0171.jpg
foglights and covers: http://i131.photobucket.com/albums/p...s/DSCI0172.jpg

Random Stuff
Because someone, somewhere prolly needs one or more of these things.

Full Snorkus, with arm attachment to fender, $20:
http://i131.photobucket.com/albums/p...s/DSCI0165.jpg
http://i131.photobucket.com/albums/p...s/DSCI0164.jpg
http://i131.photobucket.com/albums/p...s/DSCI0159.jpg
http://i131.photobucket.com/albums/p...s/DSCI0160.jpg
http://i131.photobucket.com/albums/p...s/DSCI0162.jpg
http://i131.photobucket.com/albums/p...s/DSCI0163.jpg

98 Stock Pulley Set, Crank, Alt and PS, $35 for all:
http://i131.photobucket.com/albums/p...s/DSCI0183.jpg
http://i131.photobucket.com/albums/p...s/DSCI0184.jpg
http://i131.photobucket.com/albums/p...s/DSCI0185.jpg

98 Stock Corner Lights with Amber inserts, $25:
http://i131.photobucket.com/albums/p...s/DSCI0187.jpg
http://i131.photobucket.com/albums/p...s/DSCI0188.jpg

98 Stock Amber Side Markers, $20:
http://i131.photobucket.com/albums/p...s/DSCI0173.jpg
http://i131.photobucket.com/albums/p...s/DSCI0174.jpg

98 Used Ignition Wire Set(X2) , $10: I had replaced these a couple times when my coilpack blew up. I think at least three from each set should probably still be good and serviceable, so ten bucks for both sets:
http://i131.photobucket.com/albums/p...s/DSCI0166.jpg

Kartboy Mounts, because I was too dumb to figure out how in the **** to get em to work correctly with the newer bumper setup, so they actually have 0 miles on them, $25:
http://i131.photobucket.com/albums/p...s/DSCI0176.jpg
http://i131.photobucket.com/albums/p...s/DSCI0177.jpg

Thats all of it. Send me a message if youre interested in any or all of it. If you need more/better pics, just let me know and Ill get em for ya. Thanks for looking and lookin forward to hearin from ya...

* Registered users of the site do not see these ads.

gonzobutt · 07-15-2009, 09:01 PM

bump it up

Dori Ninja · 07-22-2009, 12:13 AM

how much for heads shipped to Green Bay WI 54301??

gonzobutt · 07-26-2009, 08:23 PM

PM'ed you Ninja

gonzobutt · 07-28-2009, 08:54 PM

ninja youve got a total...and this threads got a bump...

VR4ownzU · 07-29-2009, 02:18 AM

bump for a local RS owner. If you have any other parts let me know! Prob. don't want to give up your goldies

gonzobutt · 07-31-2009, 08:42 PM

Thanks for the bump VR, unfortunately, I think thats all I got. And yeah, Im not lookin to give up the goldies, sorry

If youre lookin for anything else in particular let me know and Ill see if I have it. Ill take a look and see if theres anything layin around that I missed. Abest10 youve been PM'ed, lemme know what you think. All else take er easy and have a good weekend...

Quote:

Originally Posted by VR4ownzU

bump for a local RS owner. If you have any other parts let me know! Prob. don't want to give up your goldies

gonzobutt · 08-05-2009, 04:40 PM

all of this stuff is still available...bump it back on up...

gonzobutt · 08-21-2009, 03:11 PM

Its all still here! Its time to get your car all fixed up for back to school and the approaching winter! Make me an offer!

07-12-2009, 06:31 PM	#1
gonzobutt Scooby Newbie Member Sales Rating: (2) Member#: 61935 Join Date: May 2004 Chapter/Region: MWSOC Location: Canton, OH Vehicle: 2005 WRX White	Akron/Canton OH: EJ25D bare block and misc. stuff Finally got some pictures of a bunch of stuff I need to get out of the garage. All prices are negotiable, the stuff however is as is. Local pickup is always preferred, but I will ship this stuff anywhere. Buyer pays shipping, along with the 3% paypal. Allright, heres the list of stuff... 2007 EJ25D bare block This block is a 2.5L DOHC from a 07i Impreza. According to the poster whom I bought it from, it had only 9k miles on it. This is the original post where I got it: http://forums.nasioc.com/forums/show...ighlight=ej25d The reason its not in my car now is because the 07 DOHC does not actually work with the old 98 DOHC heads. The 07 pistons have sort of a dome shape to them, so it would need heads made specifically for it. We tried to turn the engine by hand when it got here with the heads on, but full rotation was impossible. Im guessing it will be fine with the right heads, but that being said, I cant say that Ive ever seen this engine in action, so I cant really say much as to how well it runs. Asking $350. engine, front: http://i131.photobucket.com/albums/p...s/DSCI0037.jpg engine, bottom: http://i131.photobucket.com/albums/p...s/DSCI0038.jpg engine, bottom#2: http://i131.photobucket.com/albums/p...s/DSCI0039.jpg engine, top: http://i131.photobucket.com/albums/p...s/DSCI0040.jpg engine, passenger side: http://i131.photobucket.com/albums/p...s/DSCI0041.jpg engine, passenger side closeup: http://i131.photobucket.com/albums/p...s/DSCI0042.jpg engine, drivers side: http://i131.photobucket.com/albums/p...s/DSCI0043.jpg engine, drivers side closeup: http://i131.photobucket.com/albums/p...s/DSCI0044.jpg engine, back: http://i131.photobucket.com/albums/p...s/DSCI0046.jpg 1998 DOHC heads From a 1998 Impreza 2.5 RS. One of the valves(?) on the passenger side has a crack in it...hopefully you can see it in the closeups because Im honestly not sure what the name is of what is actually cracked. These used to run fine, until the engine they used to be on guzzled itself out of oil and has since been laid to rest. Asking $100 for both. heads, back: http://i131.photobucket.com/albums/p...s/DSCI0027.jpg heads, front: http://i131.photobucket.com/albums/p...s/DSCI0033.jpg heads, outside: http://i131.photobucket.com/albums/p...s/DSCI0034.jpg heads, outside passenger side closeup: http://i131.photobucket.com/albums/p...s/DSCI0035.jpg heads, outside driver side closeup: http://i131.photobucket.com/albums/p...s/DSCI0036.jpg heads, inside: http://i131.photobucket.com/albums/p...s/DSCI0028.jpg heads, inside closeup(of crack): http://i131.photobucket.com/albums/p...s/DSCI0030.jpg 98 Intake Manifold From a 98 2.5 RS. Everything on it is in good condition. Asking $100. intake manifold, front: http://i131.photobucket.com/albums/p...s/DSCI0024.jpg intake manifold, back: http://i131.photobucket.com/albums/p...s/DSCI0025.jpg intake manifold, bottom: http://i131.photobucket.com/albums/p...s/DSCI0026.jpg 98 2.5 RS Front Bumper and Stock Beam Did a conversion to the 2000 model bumper cover and the lightweight bumper beam. This is the OBP color. Also have the turn signals and the fog lights with it, along with the foam spacer. Youll notice also that the wires from the backs of the foglights have been cut. You should be able to buy new caps with wires from the dealer, or just splice em up yourself. But the lights all worked when I took them off the car. Asking $125 for all. front bumper and spacer: http://i131.photobucket.com/albums/p...s/DSCI0178.jpg with bumper beam: http://i131.photobucket.com/albums/p...s/DSCI0179.jpg showing back of bumper beam: http://i131.photobucket.com/albums/p...s/DSCI0181.jpg showing spacer on beam: http://i131.photobucket.com/albums/p...s/DSCI0180.jpg with turn signals and foglights(full setup): http://i131.photobucket.com/albums/p...s/DSCI0170.jpg turn signals: http://i131.photobucket.com/albums/p...s/DSCI0171.jpg foglights and covers: http://i131.photobucket.com/albums/p...s/DSCI0172.jpg Random Stuff Because someone, somewhere prolly needs one or more of these things. Full Snorkus, with arm attachment to fender, $20: http://i131.photobucket.com/albums/p...s/DSCI0165.jpg http://i131.photobucket.com/albums/p...s/DSCI0164.jpg http://i131.photobucket.com/albums/p...s/DSCI0159.jpg http://i131.photobucket.com/albums/p...s/DSCI0160.jpg http://i131.photobucket.com/albums/p...s/DSCI0162.jpg http://i131.photobucket.com/albums/p...s/DSCI0163.jpg 98 Stock Pulley Set, Crank, Alt and PS, $35 for all: http://i131.photobucket.com/albums/p...s/DSCI0183.jpg http://i131.photobucket.com/albums/p...s/DSCI0184.jpg http://i131.photobucket.com/albums/p...s/DSCI0185.jpg 98 Stock Corner Lights with Amber inserts, $25: http://i131.photobucket.com/albums/p...s/DSCI0187.jpg http://i131.photobucket.com/albums/p...s/DSCI0188.jpg 98 Stock Amber Side Markers, $20: http://i131.photobucket.com/albums/p...s/DSCI0173.jpg http://i131.photobucket.com/albums/p...s/DSCI0174.jpg 98 Used Ignition Wire Set(X2) , $10: I had replaced these a couple times when my coilpack blew up. I think at least three from each set should probably still be good and serviceable, so ten bucks for both sets: http://i131.photobucket.com/albums/p...s/DSCI0166.jpg Kartboy Mounts, because I was too dumb to figure out how in the **** to get em to work correctly with the newer bumper setup, so they actually have 0 miles on them, $25: http://i131.photobucket.com/albums/p...s/DSCI0176.jpg http://i131.photobucket.com/albums/p...s/DSCI0177.jpg Thats all of it. Send me a message if youre interested in any or all of it. If you need more/better pics, just let me know and Ill get em for ya. Thanks for looking and lookin forward to hearin from ya... * Registered users of the site do not see these ads.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2.5RS Bare Block, and other Misc parts	Pi7467mp	Engine/Power/Exhaust	5	07-19-2009 03:45 AM
fs: oh: stock 03 wheels and misc	sormeroid	MWSOC Private Classifieds	4	05-07-2009 08:47 PM
wtb--junk bare block and heads for mock ups	skate enjoi	Private 'Wanted' Classifieds	12	09-30-2008 02:47 PM
FS:NJ JDM Ver 7 Sti Bare Block and Forged crank	EJ25I	Engine/Power/Exhaust	10	12-13-2007 09:10 AM
2.0,2.5 short block and misc	Ben-no	Engine/Power/Exhaust	11	11-13-2007 03:22 PM

07-15-2009, 09:01 PM	#2
gonzobutt Scooby Newbie Member Sales Rating: (2) Member#: 61935 Join Date: May 2004 Chapter/Region: MWSOC Location: Canton, OH Vehicle: 2005 WRX White	bump it up

07-22-2009, 12:13 AM	#3
Dori Ninja Scooby Specialist Member Sales Rating: (5) Member#: 73974 Join Date: Nov 2004 Chapter/Region: MWSOC Location: da grizzle! Vehicle: 00 2.5RS Camo Green	how much for heads shipped to Green Bay WI 54301??

07-26-2009, 08:23 PM	#4
gonzobutt Scooby Newbie Member Sales Rating: (2) Member#: 61935 Join Date: May 2004 Chapter/Region: MWSOC Location: Canton, OH Vehicle: 2005 WRX White	PM'ed you Ninja

07-28-2009, 08:54 PM	#5
gonzobutt Scooby Newbie Member Sales Rating: (2) Member#: 61935 Join Date: May 2004 Chapter/Region: MWSOC Location: Canton, OH Vehicle: 2005 WRX White	ninja youve got a total...and this threads got a bump...

07-29-2009, 02:18 AM	#6
VR4ownzU Scooby Newbie Member Sales Rating: (6) Member#: 122700 Join Date: Aug 2006 Chapter/Region: South East Location: Orlando, FL	bump for a local RS owner. If you have any other parts let me know! Prob. don't want to give up your goldies

08-05-2009, 04:40 PM	#8
gonzobutt Scooby Newbie Member Sales Rating: (2) Member#: 61935 Join Date: May 2004 Chapter/Region: MWSOC Location: Canton, OH Vehicle: 2005 WRX White	all of this stuff is still available...bump it back on up...

08-21-2009, 03:11 PM	#9
gonzobutt Scooby Newbie Member Sales Rating: (2) Member#: 61935 Join Date: May 2004 Chapter/Region: MWSOC Location: Canton, OH Vehicle: 2005 WRX White	Its all still here! Its time to get your car all fixed up for back to school and the approaching winter! Make me an offer!