VA: Ver. 3 STi RA Transmission

Homemade WRX · 05-03-2010, 06:36 PM

Yes, geunuine STi RA ver 3 tranny that I had imported a few years back. I used it for less than 100 miles (40k kilometers on it total) before a 6-spd setup fell into my lap. I did tear it down and inspect it prior to using it myself. It is a healthy tranny!

I imported it for roughly $3500 dollars and am willing to hook it up for such a rare and unique transmission. 5-spd STi setups are becoming VERY hard to find.

I am willing to parts gears and the DCCD rear end if two parties are putting down money for both parts.

I'll post tranny code and ratios later. I also have a blown (pinion gear) 4.44 lsd R160 rear end that I can toss in for a little more, since the 4.44 housing is taller. Also spares the junkyard diving/junt for a 4.44 4eat rear end, that is still open.

TY752VB5CA
1st:3.083
2nd:2.062
3rd:1.545
4th:1.151
5th:0.825
FD:4.444

Asking $2800 OBO. (will toss in an old school mechanical LSD 4.44 rear end if bought out right)
The tranny is completely assembled. Pictures are from a tear down to show that all is well.

Willing to split and sell the RA gearset with case and steel shift fork, all assembled for $1700. Already have a buyer for the center diff section.

-Micah

* Registered users of the site do not see these ads.

Homemade WRX · 05-06-2010, 12:55 PM

bumpity

sube151 · 05-06-2010, 07:16 PM

Another ~$800 and your in 6spd prices. You paid a bit too much for this box.
Good luck with sale though.

Homemade WRX · 05-06-2010, 10:28 PM

Quote:

Originally Posted by sube151

Another ~$800 and your in 6spd prices. You paid a bit too much for this box.
Good luck with sale though.

yeah but 6-spd's also aren't rare and desirable for given applications.

Dude, I also bought this when a 6-spd trans alone was north of $4k.

I'd dare you to find another STi RA trans, phase 1 with a steel shift fork....and of course the coveted 5-spd DCCD.

You can also compare prices on an RA gearset, then a case and then having them assembled. Get that price and then also consider you are without DCCD.

Run the value how you want.

hustleshark206 · 05-07-2010, 05:39 PM

Cool tranny Micah. Good luck with the sale

Homemade WRX · 05-10-2010, 01:09 AM

thanks!
and bump

Homemade WRX · 05-12-2010, 11:28 PM

bumpity

open to offers and such

Homemade WRX · 05-29-2010, 09:51 PM

buyer had to back out because of family emergency...back up for sale.

Homemade WRX · 05-31-2010, 11:31 AM

holiday bump

Homemade WRX · 06-01-2010, 10:48 AM

bumpity...added a price for just the gear/trans section. May have a spare vsld center section to add for free.

Homemade WRX · 06-01-2010, 09:37 PM

bump, I want this gone. Reasonable offers won't be turned down.

Homemade WRX · 06-03-2010, 10:40 AM

bumpity...

Homemade WRX · 06-07-2010, 10:48 AM

bump for the beginning of the week

Homemade WRX · 06-08-2010, 01:10 PM

bump as I need a buyer for the assembled trans case with RA gears and steel shift fork...make an offer.

Homemade WRX · 06-09-2010, 11:28 AM

bumpity

surfrjag · 06-09-2010, 09:25 PM

im gonna search and them im gonna pm u

Homemade WRX · 06-10-2010, 11:31 AM

go for it.

surfrjag · 06-11-2010, 04:00 PM

still searching...

Homemade WRX · 06-11-2010, 05:37 PM

no rush. let me know if you have any questions or want to come over and check it out.

Homemade WRX · 06-14-2010, 03:29 PM

bumpity

Homemade WRX · 06-20-2010, 09:10 PM

bumpity

Homemade WRX · 06-23-2010, 10:54 AM

now that I'm back in town, I've added some pictures for your viewing pleasure.

Homemade WRX · 06-25-2010, 12:01 PM

bumpity

Homemade WRX · 06-28-2010, 01:09 PM

Quote:

Originally Posted by Homemade WRX

bumpity

another one of these

coqui2004miguel · 06-28-2010, 02:33 PM

What is the power rating on these gears?

05-03-2010, 06:36 PM	#1
Homemade WRX Scooby Guru Member Sales Rating: (7) Member#: 33782 Join Date: Mar 2003 Chapter/Region: MAIC Location: 3MI Racing LLC Vehicle: 96 bastard child search FIRST, then PM!!!	VA: Ver. 3 STi RA Transmission Yes, geunuine STi RA ver 3 tranny that I had imported a few years back. I used it for less than 100 miles (40k kilometers on it total) before a 6-spd setup fell into my lap. I did tear it down and inspect it prior to using it myself. It is a healthy tranny! I imported it for roughly $3500 dollars and am willing to hook it up for such a rare and unique transmission. 5-spd STi setups are becoming VERY hard to find. I am willing to parts gears and the DCCD rear end if two parties are putting down money for both parts. I'll post tranny code and ratios later. I also have a blown (pinion gear) 4.44 lsd R160 rear end that I can toss in for a little more, since the 4.44 housing is taller. Also spares the junkyard diving/junt for a 4.44 4eat rear end, that is still open. TY752VB5CA 1st:3.083 2nd:2.062 3rd:1.545 4th:1.151 5th:0.825 FD:4.444 Asking $2800 OBO. (will toss in an old school mechanical LSD 4.44 rear end if bought out right) The tranny is completely assembled. Pictures are from a tear down to show that all is well. Willing to split and sell the RA gearset with case and steel shift fork, all assembled for $1700. Already have a buyer for the center diff section. -Micah * Registered users of the site do not see these ads. Last edited by Homemade WRX; 07-07-2010 at 12:31 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
JDM ver 3 STI transmission questions	Seanco	Newbies & FAQs	5	05-03-2010 10:45 AM
GC8 seats: Stock 2.5RS/ JDM Ver 3 WRX/ JDM Ver 3 STi	04jaxwrex	Interior/Dressup/Audio & Security	7	04-04-2010 11:52 PM
Lookinf for someone who can put Ver.6 STi RA 5M gears into my tranny	Bumble Bee 03	Mid West Subaru Owners Club Forum -- MWSOC	6	02-05-2004 04:23 PM
WTB: Ver.7 STi RA Spec C intercooler tank	Sisqocqk	Private 'Wanted' Classifieds	0	10-15-2003 11:22 PM
Will a jdm ver 6 sti ra engine pass emissions?	mrtrex	Normally Aspirated with bolt-on Forced Induction Powertrain	8	07-10-2002 10:31 AM

05-06-2010, 12:55 PM	#2
Homemade WRX Scooby Guru Member Sales Rating: (7) Member#: 33782 Join Date: Mar 2003 Chapter/Region: MAIC Location: 3MI Racing LLC Vehicle: 96 bastard child search FIRST, then PM!!!	bumpity

05-06-2010, 07:16 PM	#3
sube151 Scooby Specialist Member Sales Rating: (8) Member#: 3184 Join Date: Dec 2000 Location: Albuquerque, NM Vehicle: 00 Grp N Wrx STi, +99 V6 STi,	Another ~$800 and your in 6spd prices. You paid a bit too much for this box. Good luck with sale though.

05-07-2010, 05:39 PM	#5
hustleshark206 Scooby Specialist Member Sales Rating: (26) Member#: 182227 Join Date: Jun 2008 Chapter/Region: NWIC Location: seattle, WA/ Jackson WY Vehicle: 2000 MPS Built RS 1991 Leggy Turbo EJ22t	Cool tranny Micah. Good luck with the sale

05-10-2010, 01:09 AM	#6
Homemade WRX Scooby Guru Member Sales Rating: (7) Member#: 33782 Join Date: Mar 2003 Chapter/Region: MAIC Location: 3MI Racing LLC Vehicle: 96 bastard child search FIRST, then PM!!!	thanks! and bump

05-12-2010, 11:28 PM	#7
Homemade WRX Scooby Guru Member Sales Rating: (7) Member#: 33782 Join Date: Mar 2003 Chapter/Region: MAIC Location: 3MI Racing LLC Vehicle: 96 bastard child search FIRST, then PM!!!	bumpity open to offers and such

05-29-2010, 09:51 PM	#8
Homemade WRX Scooby Guru Member Sales Rating: (7) Member#: 33782 Join Date: Mar 2003 Chapter/Region: MAIC Location: 3MI Racing LLC Vehicle: 96 bastard child search FIRST, then PM!!!	buyer had to back out because of family emergency...back up for sale.

05-31-2010, 11:31 AM	#9
Homemade WRX Scooby Guru Member Sales Rating: (7) Member#: 33782 Join Date: Mar 2003 Chapter/Region: MAIC Location: 3MI Racing LLC Vehicle: 96 bastard child search FIRST, then PM!!!	holiday bump

06-01-2010, 10:48 AM	#10
Homemade WRX Scooby Guru Member Sales Rating: (7) Member#: 33782 Join Date: Mar 2003 Chapter/Region: MAIC Location: 3MI Racing LLC Vehicle: 96 bastard child search FIRST, then PM!!!	bumpity...added a price for just the gear/trans section. May have a spare vsld center section to add for free.

06-01-2010, 09:37 PM	#11
Homemade WRX Scooby Guru Member Sales Rating: (7) Member#: 33782 Join Date: Mar 2003 Chapter/Region: MAIC Location: 3MI Racing LLC Vehicle: 96 bastard child search FIRST, then PM!!!	bump, I want this gone. Reasonable offers won't be turned down.

06-03-2010, 10:40 AM	#12
Homemade WRX Scooby Guru Member Sales Rating: (7) Member#: 33782 Join Date: Mar 2003 Chapter/Region: MAIC Location: 3MI Racing LLC Vehicle: 96 bastard child search FIRST, then PM!!!	bumpity...

06-07-2010, 10:48 AM	#13
Homemade WRX Scooby Guru Member Sales Rating: (7) Member#: 33782 Join Date: Mar 2003 Chapter/Region: MAIC Location: 3MI Racing LLC Vehicle: 96 bastard child search FIRST, then PM!!!	bump for the beginning of the week

06-08-2010, 01:10 PM	#14
Homemade WRX Scooby Guru Member Sales Rating: (7) Member#: 33782 Join Date: Mar 2003 Chapter/Region: MAIC Location: 3MI Racing LLC Vehicle: 96 bastard child search FIRST, then PM!!!	bump as I need a buyer for the assembled trans case with RA gears and steel shift fork...make an offer.

06-09-2010, 11:28 AM	#15
Homemade WRX Scooby Guru Member Sales Rating: (7) Member#: 33782 Join Date: Mar 2003 Chapter/Region: MAIC Location: 3MI Racing LLC Vehicle: 96 bastard child search FIRST, then PM!!!	bumpity

06-09-2010, 09:25 PM	#16
surfrjag Scooby Newbie Member Sales Rating: (3) Member#: 225671 Join Date: Oct 2009 Location: chesapeake, va Vehicle: 2002 wrx impreza the black pearl	im gonna search and them im gonna pm u

06-10-2010, 11:31 AM	#17
Homemade WRX Scooby Guru Member Sales Rating: (7) Member#: 33782 Join Date: Mar 2003 Chapter/Region: MAIC Location: 3MI Racing LLC Vehicle: 96 bastard child search FIRST, then PM!!!	go for it.

06-11-2010, 04:00 PM	#18
surfrjag Scooby Newbie Member Sales Rating: (3) Member#: 225671 Join Date: Oct 2009 Location: chesapeake, va Vehicle: 2002 wrx impreza the black pearl	still searching...

06-11-2010, 05:37 PM	#19
Homemade WRX Scooby Guru Member Sales Rating: (7) Member#: 33782 Join Date: Mar 2003 Chapter/Region: MAIC Location: 3MI Racing LLC Vehicle: 96 bastard child search FIRST, then PM!!!	no rush. let me know if you have any questions or want to come over and check it out.

06-14-2010, 03:29 PM	#20
Homemade WRX Scooby Guru Member Sales Rating: (7) Member#: 33782 Join Date: Mar 2003 Chapter/Region: MAIC Location: 3MI Racing LLC Vehicle: 96 bastard child search FIRST, then PM!!!	bumpity

06-20-2010, 09:10 PM	#21
Homemade WRX Scooby Guru Member Sales Rating: (7) Member#: 33782 Join Date: Mar 2003 Chapter/Region: MAIC Location: 3MI Racing LLC Vehicle: 96 bastard child search FIRST, then PM!!!	bumpity

06-23-2010, 10:54 AM	#22
Homemade WRX Scooby Guru Member Sales Rating: (7) Member#: 33782 Join Date: Mar 2003 Chapter/Region: MAIC Location: 3MI Racing LLC Vehicle: 96 bastard child search FIRST, then PM!!!	now that I'm back in town, I've added some pictures for your viewing pleasure.

06-25-2010, 12:01 PM	#23
Homemade WRX Scooby Guru Member Sales Rating: (7) Member#: 33782 Join Date: Mar 2003 Chapter/Region: MAIC Location: 3MI Racing LLC Vehicle: 96 bastard child search FIRST, then PM!!!	bumpity

06-28-2010, 02:33 PM	#25
coqui2004miguel Scooby Specialist Member Sales Rating: (18) Member#: 189901 Join Date: Sep 2008 Chapter/Region: South East Location: Bonaire, GA Vehicle: 02 WRX Bugeye Aspen White, WRB interior	What is the power rating on these gears?