Lookinf AWD Mafia Sticker Creator

CSibbs · 02-28-2011, 10:50 PM

I'm looking for the creator of the AWD Mafia sticker. I have created my own sticker and would like to start selling them, But I don't want to start any controversy with the original creator. Whoever you are, please shoot me a pm

*Looking!

Updated:

Now dont freak out because the image is pixelated. I enlarged it. What type of colors do you guys like the most?

* Registered users of the site do not see these ads.

Tsujen · 02-28-2011, 11:26 PM

If you created your own sticker, why would you start controversy with another creator?

Post up your sticker

dub599 · 02-28-2011, 11:33 PM

im guessing he doesnt want to piss off the guy who originally started the club/group, because he made his own sticker. i say forget about it and post that sticker up.

bbun · 03-01-2011, 12:33 AM

does it look exactly like the one he created?.
postits up

CSibbs · 03-01-2011, 06:54 AM

ill post it up when I get home. I'm on my phone right now

JavaBot · 03-01-2011, 10:53 AM

His name on here is dramabomb. Joe is the man but he is nuts, we all were

so I suggest being somewhat respectul. He doesn't have stickers but prob has the template. GL

CSibbs · 03-01-2011, 11:26 AM

I made up my own template in PS. I just have to basically make the sticker.
Just didnt want to start any internet 'drama.'

JavaBot · 03-01-2011, 04:31 PM

hahaha well just because you have the sticker doesn't mean you're in

and he's no drama hes just ****in nuts! Great guy and our local law enforcement rep for our philly to ac cruise. You should come out next time and meet him.

Let me see if I have one I can pm you...

CSibbs · 03-01-2011, 05:18 PM

Hmm, Philly to AC?

Philly=1 hour
AC=35 minutes.
Kinda out of the way

I'd probably go anyway.

JavaBot · 03-01-2011, 06:32 PM

out of the way for cheesesteaks + modded subis and so much win? Plus then you get a 45 min cruise to AC with over 50 cars and only a 35 min ride home. Or you can meet us there. Or not. Not sure you're awdm material....

CSibbs · 03-01-2011, 06:41 PM

Haha, I see how it is.
Didn't know we were getting cheesesteaks.
Count me in!

AfflxnPB · 03-01-2011, 07:09 PM

That looks remarkably like you flipped the W over. and that's about it. Then again unless you start from scratch there isn't much else to do.
From a design side, that space between the D and the M annoys me a lot. You should push back the bottom of the D or something to keep the italic theme going without a giant gaping space up top. Just doesn't look right to me.

CSibbs · 03-01-2011, 07:14 PM

Yeah I know exactly what you mean. I'm free right now and for the rest of the night so I guess I'll fire up PS and play around with it.

Tsujen · 03-01-2011, 07:15 PM

If you made it from scratch then who cares. Look at rotas and all the other knock off products in the world today.

AfflxnPB · 03-01-2011, 07:19 PM

Yea but he isn't producing this to undercut or copy anyone. He's just making a design.
I work with the idea that you take feedback and make changes if needed as you go.
I just gave my opinion and he said he might work on it, so mission accomplished as far as i'm concerned.

Shiz36 · 03-01-2011, 08:04 PM

You want to be using Illustrator, not Photoshop. Most sign shops will need vector artwork to make decals. I hope at least the Photoshop file you're working is larger than 72 dpi.

CSibbs · 03-01-2011, 08:31 PM

Bad animation, threw this together real fast just so you can see the new design. (Changed the D) Thanks AfflixnPB.

gaugeof12 · 03-01-2011, 09:32 PM

Meh. I like this version better...

AfflxnPB · 03-01-2011, 09:44 PM

I like the new one more without the gap. Now it looks like something that would replace the "oem type" vinyl sticker on the back if it was printed a similar size.
I like when the design doesn't stand out and you don't notice it at first, but if gaugeof12 prefers it the other way, that's fine too.

*edit* another idea is use the de-gapped AWDM and then the "bar text" verison of "all wheel drive mafia" in the one above^^^ acting like a bold underline. (preferably so that the height of the bar balances with the width of the letters)

gaugeof12 · 03-01-2011, 09:58 PM

It does look better with out the gap. Looking for a suitable font that would work now.

CSibbs · 03-01-2011, 10:15 PM

Quote:

Originally Posted by AfflxnPB

I like the new one more without the gap. Now it looks like something that would replace the "oem type" vinyl sticker on the back if it was printed a similar size.
I like when the design doesn't stand out and you don't notice it at first, but if gaugeof12 prefers it the other way, that's fine too.

*edit* another idea is use the de-gapped AWDM and then the "bar text" verison of "all wheel drive mafia" in the one above^^^ acting like a bold underline. (preferably so that the height of the bar balances with the width of the letters)

Like this?

adamgmxr · 03-02-2011, 06:38 AM

Quote:

Originally Posted by CSibbs

Like this?

Definitely linking that if it were in blue. I have some guys here around Albany that would jump in if we could get some of these.

CSibbs · 03-02-2011, 02:41 PM

Quote:

Originally Posted by adamgmxr

Definitely linking that if it were in blue. I have some guys here around Albany that would jump in if we could get some of these.

Sounds good, and also, I'm not sure what size to make them. I was thinking about a little smaller than the size of a dollar bill

AfflxnPB · 03-02-2011, 07:41 PM

You got it. That's basically what I had in my head.

CSibbs · 03-02-2011, 08:10 PM

Not the only thing I'm worried about is whether or not its going to be too hard to read on a window since its now going to take the color of whatever is behind it.

02-28-2011, 10:50 PM	#1
CSibbs Scooby Specialist Member#: 262532 Join Date: Oct 2010 Chapter/Region: Tri-State Location: Long Beach Island Vehicle: '12 STi (R.I.P) Dark Grey Metallic	I'm looking for the creator of the AWD Mafia sticker. I have created my own sticker and would like to start selling them, But I don't want to start any controversy with the original creator. Whoever you are, please shoot me a pm Looking! Updated: Now dont freak out because the image is pixelated. I enlarged it. What type of colors do you guys like the most? Registered users of the site do not see these ads. Last edited by CSibbs; 03-01-2011 at 08:47 PM. Reason: im an idiot.

03-01-2011, 09:44 PM	#19
AfflxnPB Scooby Specialist Member#: 172036 Join Date: Feb 2008 Chapter/Region: Tri-State Location: NNJ Vehicle: 2010 2.5i Prem SSM	I like the new one more without the gap. Now it looks like something that would replace the "oem type" vinyl sticker on the back if it was printed a similar size. I like when the design doesn't stand out and you don't notice it at first, but if gaugeof12 prefers it the other way, that's fine too. edit another idea is use the de-gapped AWDM and then the "bar text" verison of "all wheel drive mafia" in the one above^^^ acting like a bold underline. (preferably so that the height of the bar balances with the width of the letters) Last edited by AfflxnPB; 03-01-2011 at 09:53 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Those with Wagon Mafia stickers	eurospek	Interior & Exterior Modification	24	05-23-2012 12:26 AM
Wagon Mafia stickers	Jskinz	Newbies & FAQs	3	03-05-2010 11:04 PM
AWD warning sticker	Joelk	Interior & Exterior Modification	98	05-30-2007 02:02 PM
New Jaguar X-type is comming AWD too, sticker for around 33,000	munkis	General Forum Archive	4	12-23-2000 08:54 AM

02-28-2011, 11:26 PM	#2
Tsujen Scooby Specialist Member#: 269643 Join Date: Jan 2011 Chapter/Region: MWSOC Location: Naperville, IL Vehicle: 2004 Imperza WRX JBP	If you created your own sticker, why would you start controversy with another creator? Post up your sticker

02-28-2011, 11:33 PM	#3
dub599 Scooby Newbie Member#: 269645 Join Date: Jan 2011 Chapter/Region: BAIC Location: bay area Vehicle: 2009 wrx dgm	im guessing he doesnt want to piss off the guy who originally started the club/group, because he made his own sticker. i say forget about it and post that sticker up.

03-01-2011, 12:33 AM	#4
bbun Scooby Specialist Member#: 184554 Join Date: Jul 2008 Chapter/Region: SCIC Location: Orange County Vehicle: 02 ghettoFABness bugeye rolling.	does it look exactly like the one he created?. postits up

03-01-2011, 06:54 AM	#5
CSibbs Scooby Specialist Member#: 262532 Join Date: Oct 2010 Chapter/Region: Tri-State Location: Long Beach Island Vehicle: '12 STi (R.I.P) Dark Grey Metallic	ill post it up when I get home. I'm on my phone right now

03-01-2011, 10:53 AM	#6
JavaBot Scooby Guru Member#: 156723 Join Date: Aug 2007 Chapter/Region: Tri-State Location: Illadelph Vehicle: 99rs Silver rip javabot <3	His name on here is dramabomb. Joe is the man but he is nuts, we all were so I suggest being somewhat respectul. He doesn't have stickers but prob has the template. GL

03-01-2011, 11:26 AM	#7
CSibbs Scooby Specialist Member#: 262532 Join Date: Oct 2010 Chapter/Region: Tri-State Location: Long Beach Island Vehicle: '12 STi (R.I.P) Dark Grey Metallic	I made up my own template in PS. I just have to basically make the sticker. Just didnt want to start any internet 'drama.'

03-01-2011, 04:31 PM	#8
JavaBot Scooby Guru Member#: 156723 Join Date: Aug 2007 Chapter/Region: Tri-State Location: Illadelph Vehicle: 99rs Silver rip javabot <3	hahaha well just because you have the sticker doesn't mean you're in and he's no drama hes just ****in nuts! Great guy and our local law enforcement rep for our philly to ac cruise. You should come out next time and meet him. Let me see if I have one I can pm you...

03-01-2011, 05:18 PM	#9
CSibbs Scooby Specialist Member#: 262532 Join Date: Oct 2010 Chapter/Region: Tri-State Location: Long Beach Island Vehicle: '12 STi (R.I.P) Dark Grey Metallic	Hmm, Philly to AC? Philly=1 hour AC=35 minutes. Kinda out of the way I'd probably go anyway.

03-01-2011, 06:32 PM	#10
JavaBot Scooby Guru Member#: 156723 Join Date: Aug 2007 Chapter/Region: Tri-State Location: Illadelph Vehicle: 99rs Silver rip javabot <3	out of the way for cheesesteaks + modded subis and so much win? Plus then you get a 45 min cruise to AC with over 50 cars and only a 35 min ride home. Or you can meet us there. Or not. Not sure you're awdm material....

03-01-2011, 06:41 PM	#11
CSibbs Scooby Specialist Member#: 262532 Join Date: Oct 2010 Chapter/Region: Tri-State Location: Long Beach Island Vehicle: '12 STi (R.I.P) Dark Grey Metallic	Haha, I see how it is. Didn't know we were getting cheesesteaks. Count me in!

03-01-2011, 07:09 PM	#12
AfflxnPB Scooby Specialist Member#: 172036 Join Date: Feb 2008 Chapter/Region: Tri-State Location: NNJ Vehicle: 2010 2.5i Prem SSM	That looks remarkably like you flipped the W over. and that's about it. Then again unless you start from scratch there isn't much else to do. From a design side, that space between the D and the M annoys me a lot. You should push back the bottom of the D or something to keep the italic theme going without a giant gaping space up top. Just doesn't look right to me.

03-01-2011, 07:14 PM	#13
CSibbs Scooby Specialist Member#: 262532 Join Date: Oct 2010 Chapter/Region: Tri-State Location: Long Beach Island Vehicle: '12 STi (R.I.P) Dark Grey Metallic	Yeah I know exactly what you mean. I'm free right now and for the rest of the night so I guess I'll fire up PS and play around with it.

03-01-2011, 07:15 PM	#14
Tsujen Scooby Specialist Member#: 269643 Join Date: Jan 2011 Chapter/Region: MWSOC Location: Naperville, IL Vehicle: 2004 Imperza WRX JBP	If you made it from scratch then who cares. Look at rotas and all the other knock off products in the world today.

03-01-2011, 07:19 PM	#15
AfflxnPB Scooby Specialist Member#: 172036 Join Date: Feb 2008 Chapter/Region: Tri-State Location: NNJ Vehicle: 2010 2.5i Prem SSM	Yea but he isn't producing this to undercut or copy anyone. He's just making a design. I work with the idea that you take feedback and make changes if needed as you go. I just gave my opinion and he said he might work on it, so mission accomplished as far as i'm concerned.

03-01-2011, 08:04 PM	#16
Shiz36 Scooby Specialist Member#: 147730 Join Date: Apr 2007 Chapter/Region: NESIC Location: Quincy MA Vehicle: 2007 Impreza 2.5i SE Urban Gray Metallic	You want to be using Illustrator, not Photoshop. Most sign shops will need vector artwork to make decals. I hope at least the Photoshop file you're working is larger than 72 dpi.

03-01-2011, 08:31 PM	#17
CSibbs Scooby Specialist Member#: 262532 Join Date: Oct 2010 Chapter/Region: Tri-State Location: Long Beach Island Vehicle: '12 STi (R.I.P) Dark Grey Metallic	Bad animation, threw this together real fast just so you can see the new design. (Changed the D) Thanks AfflixnPB.

03-01-2011, 09:32 PM	#18
gaugeof12 Scooby Specialist Member#: 132859 Join Date: Nov 2006 Chapter/Region: TXIC Location: Dallas Texas Vehicle: 2007 WRX Urban Gray Metallic	Meh. I like this version better...

03-01-2011, 09:58 PM	#20
gaugeof12 Scooby Specialist Member#: 132859 Join Date: Nov 2006 Chapter/Region: TXIC Location: Dallas Texas Vehicle: 2007 WRX Urban Gray Metallic	It does look better with out the gap. Looking for a suitable font that would work now.

03-02-2011, 07:41 PM	#24
AfflxnPB Scooby Specialist Member#: 172036 Join Date: Feb 2008 Chapter/Region: Tri-State Location: NNJ Vehicle: 2010 2.5i Prem SSM	You got it. That's basically what I had in my head.

03-02-2011, 08:10 PM	#25
CSibbs Scooby Specialist Member#: 262532 Join Date: Oct 2010 Chapter/Region: Tri-State Location: Long Beach Island Vehicle: '12 STi (R.I.P) Dark Grey Metallic	Not the only thing I'm worried about is whether or not its going to be too hard to read on a window since its now going to take the color of whatever is behind it.