Lowered 2011 WRX/STi Sedans - Page 5

ILSMKU2 · 06-07-2011, 11:42 AM

Quote:

Originally Posted by besthaticouldo

is your car on KW V3s?

a lot of people love their BCs, especially with the inverted ram...which is the route i will go.

Why yes it is. I bought them to fix the saggy and uneven (left to right) stance Epics made my car.

The settings on the KW are insane. One turn of the adjustment dial(s) is night and day difference. I have no clunk, no sounds, and my stance is perfect just how I wanted it. 1 finger all around. I dont know why people say coils for track only. These ride better than stock did hands down. I will never ever buy drop springs again after owning these.

* Registered users of the site do not see these ads.

besthaticouldo · 06-07-2011, 11:47 AM

hmmm

you should come out to a meet so i can see your car and maybe you take me for a ride to feel the coils...

mind me asking how much you spent on the KWs?

ILSMKU2 · 06-07-2011, 11:54 AM

Quote:

Originally Posted by besthaticouldo

hmmm

you should come out to a meet so i can see your car and maybe you take me for a ride to feel the coils...

mind me asking how much you spent on the KWs?

Perhaps...

I bought them used for 1500 bucks.

96accord · 06-07-2011, 11:56 AM

Quote:

Originally Posted by ILSMKU2

I bought them used for 1500 bucks.

I'm sure if everyone could get a deal like that they wouldn't buy BC's... Definitely look better than Kevin's spring setup!

besthaticouldo · 06-07-2011, 11:58 AM

yea that looks awesome. now you just need spacers to push those wheels out...

ILSMKU2 · 06-07-2011, 12:01 PM

Quote:

Originally Posted by besthaticouldo

yea that looks awesome. now you just need spacers to push those wheels out...

Well, my buddy Phazewun was spos to have some by now for me to see how 20MM looked. I wanted to see it before I bought them. Just waiting for him. But I agree and plan to ASAP.

96accord · 06-07-2011, 12:01 PM

ILSMKU2's STi > Phazewun's STi

ILSMKU2 · 06-07-2011, 12:02 PM

Quote:

Originally Posted by 96accord

ILSMKU2's STi > Phazewun's STi

ILSMKU2 · 06-07-2011, 12:04 PM

Here I am with 2 fingers gap. This is what I had my KW set to when I first got them installed. I later learned I was at the MAX allowed height at this setting. So I dropped it down to the KW recommended height and it felt and handled ALOT better.

ILSMKU2 · 06-07-2011, 12:05 PM

Quote:

Originally Posted by besthaticouldo

yea that looks awesome. now you just need spacers to push those wheels out...

Wait... do you have spacers!?

besthaticouldo · 06-07-2011, 12:10 PM

no, i don't have spacers. but i dont plan on keeping my wheels.

stpkenton · 06-08-2011, 12:54 AM

Quote:

Originally Posted by jonnylin1

what's with the crazy angled passenger side muffler?

besides that great pics and car!

and did I read correctly...? that's your wifes car??

yes, its the wifes car. i drive the hatorade evo

and the exhaust did not fit as well on the passenger side.:cry:

THOMASdeTRAIN · 06-08-2011, 01:20 AM

Im very interested in the BC BR coilovers but im kind of confused on which ones will actually fit my car...the ones that have BC BRs which ones are they are on the Import Image Racing website? sooo confused meh

Entaille · 06-08-2011, 01:25 AM

contact their CS - they will order the right ones for you

olazy · 06-08-2011, 01:31 AM

Quote:

Originally Posted by THOMASdeTRAIN

Im very interested in the BC BR coilovers but im kind of confused on which ones will actually fit my car...the ones that have BC BRs which ones are they are on the Import Image Racing website? sooo confused meh

I got mind through bostonmotorsports, hit up dan on pm, he'll hook you up.

THOMASdeTRAIN · 06-08-2011, 01:40 AM

hey thanks a lot for the advice but who is dan lol?

edit: nvm found it!

96accord · 06-08-2011, 08:22 AM

Quote:

Originally Posted by THOMASdeTRAIN

Im very interested in the BC BR coilovers but im kind of confused on which ones will actually fit my car...the ones that have BC BRs which ones are they are on the Import Image Racing website? sooo confused meh

Hey Man,

I hope you don't mind but this is a picture of a '11 WRB STi with BC BR Type coilovers:

*Vehicle Owned by Louie*

besthaticouldo · 06-08-2011, 11:12 AM

we never mind.

thats the perfect stance. thats what i want.

Midevil · 06-08-2011, 11:14 AM

^ those are BC Racing BR Type coils

96accord · 06-08-2011, 11:17 AM

Quote:

Originally Posted by Midevil

^ those are BC Racing BR Type coils

I thought I typed that it was the BR Type.. Whoops

Midevil · 06-08-2011, 11:22 AM

Ohh.. just clarifying which type just in case someone is curious.

scooby24 · 06-08-2011, 01:42 PM

15mm spacers help with the stock wheels. RCE Yellows

besthaticouldo · 06-08-2011, 01:43 PM

^^that looks amazing. i wanted a white sedan so badly, they didn't have any available. looks gorgeous.

ILSMKU2 · 06-08-2011, 03:06 PM

Quote:

Originally Posted by scooby24

15mm spacers help with the stock wheels. RCE Yellows

Did you have to cut your stock studs? Or swap them out?

cmiller219 · 06-08-2011, 03:30 PM

^^he will prob. be using ICHIBA V2 so no need to do any of that

06-08-2011, 01:40 AM	#116
THOMASdeTRAIN Scooby Newbie Member#: 269518 Join Date: Jan 2011 Chapter/Region: SCIC Location: Los Angeles Vehicle: 2011 Impreza WRX OBP	hey thanks a lot for the advice but who is dan lol? edit: nvm found it! Last edited by THOMASdeTRAIN; 06-08-2011 at 01:46 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2011+ WRX/STI Sedan Rallyarmor Mud Flap Application	Rallyarmor	Vendor Announcements	1	10-20-2010 02:20 PM
Video: 2011 WRX STI sedan runs 'Ring in 7:55, quickest ever for Subaru	wrxposer	Vancouver Impreza Club Forum -- VIC	33	06-21-2010 11:52 PM
Video: 2011 WRX STI sedan runs 'Ring in 7:55, quickest ever for Subaru	Nomadgene	Alaskan Impreza Club Forum -- AKIC	10	06-11-2010 10:32 AM
Autoblog: 2011 WRX STI sedan runs 'Ring in 7:55, quickest ever for Subaru	P.Rico	General Community	4	06-09-2010 10:56 AM

06-07-2011, 11:47 AM	#102
besthaticouldo NASIOC Supporter Member#: 279660 Join Date: Apr 2011 Chapter/Region: MWSOC Location: STL Vehicle: LOL Celery sits down to pee	hmmm you should come out to a meet so i can see your car and maybe you take me for a ride to feel the coils... mind me asking how much you spent on the KWs?

06-07-2011, 11:58 AM	#105
besthaticouldo NASIOC Supporter Member#: 279660 Join Date: Apr 2011 Chapter/Region: MWSOC Location: STL Vehicle: LOL Celery sits down to pee	yea that looks awesome. now you just need spacers to push those wheels out...

06-07-2011, 12:01 PM	#107
96accord Scooby Guru Member#: 145105 Join Date: Apr 2007 Chapter/Region: MAIC Location: Maryland Vehicle: 2007 WRB WRX Limited	ILSMKU2's STi > Phazewun's STi

06-07-2011, 12:04 PM	#109
ILSMKU2 Scooby Specialist Member#: 77908 Join Date: Dec 2004 Chapter/Region: SCIC Location: OC Vehicle: 2011 E92 ///M3 RIP 11, 09, 06, 03 STI's	Here I am with 2 fingers gap. This is what I had my KW set to when I first got them installed. I later learned I was at the MAX allowed height at this setting. So I dropped it down to the KW recommended height and it felt and handled ALOT better.

06-07-2011, 12:10 PM	#111
besthaticouldo NASIOC Supporter Member#: 279660 Join Date: Apr 2011 Chapter/Region: MWSOC Location: STL Vehicle: LOL Celery sits down to pee	no, i don't have spacers. but i dont plan on keeping my wheels.

06-08-2011, 01:20 AM	#113
THOMASdeTRAIN Scooby Newbie Member#: 269518 Join Date: Jan 2011 Chapter/Region: SCIC Location: Los Angeles Vehicle: 2011 Impreza WRX OBP	Im very interested in the BC BR coilovers but im kind of confused on which ones will actually fit my car...the ones that have BC BRs which ones are they are on the Import Image Racing website? sooo confused meh

06-08-2011, 01:25 AM	#114
Entaille Scooby Specialist Member#: 217875 Join Date: Jul 2009 Chapter/Region: NWIC Location: Everett Vehicle: 2011 WRX WRBP	contact their CS - they will order the right ones for you

06-08-2011, 11:12 AM	#118
besthaticouldo NASIOC Supporter Member#: 279660 Join Date: Apr 2011 Chapter/Region: MWSOC Location: STL Vehicle: LOL Celery sits down to pee	we never mind. thats the perfect stance. thats what i want.

06-08-2011, 11:14 AM	#119
Midevil Scooby Specialist Member#: 175065 Join Date: Mar 2008 Chapter/Region: MAIC Location: MD Vehicle: 2011 SWP WRX INTERNET TOUGH GUYS? LOL	^ those are BC Racing BR Type coils

06-08-2011, 11:22 AM	#121
Midevil Scooby Specialist Member#: 175065 Join Date: Mar 2008 Chapter/Region: MAIC Location: MD Vehicle: 2011 SWP WRX INTERNET TOUGH GUYS? LOL	Ohh.. just clarifying which type just in case someone is curious.

06-08-2011, 01:42 PM	#122
scooby24 Scooby Specialist Member#: 56414 Join Date: Mar 2004 Chapter/Region: MWSOC Location: Kansas City Vehicle: 2003 BMW 330i ZHP	15mm spacers help with the stock wheels. RCE Yellows

06-08-2011, 01:43 PM	#123
besthaticouldo NASIOC Supporter Member#: 279660 Join Date: Apr 2011 Chapter/Region: MWSOC Location: STL Vehicle: LOL Celery sits down to pee	^^that looks amazing. i wanted a white sedan so badly, they didn't have any available. looks gorgeous.

06-08-2011, 03:30 PM	#125
cmiller219 Scooby Specialist Member#: 187179 Join Date: Aug 2008 Chapter/Region: International Location: Bowie, MD Vehicle: 5 Golden Rings	^^he will prob. be using ICHIBA V2 so no need to do any of that