Blue Batmobile/Overlay Thread - Hatch Edition! - Page 27

olenderc · 11-20-2012, 01:37 AM

http://s2.beta.photobucket.com/user/...t308c.jpg.html

In regards to this overlay, do you now make this color scheme as one "smoked redout overlay" where this color is achieved through a single overlay or is it the red overlay with a second 3/10 tint over it, or a 6/10 over it, I couldn't tell. I just went through the entire 26 pages of this thread....haha.

* Registered users of the site do not see these ads.

2point0 · 11-20-2012, 09:52 AM

Quote:

Originally Posted by olenderc

http://s2.beta.photobucket.com/user/...t308c.jpg.html

In regards to this overlay, do you now make this color scheme as one "smoked redout overlay" where this color is achieved through a single overlay or is it the red overlay with a second 3/10 tint over it, or a 6/10 over it, I couldn't tell. I just went through the entire 26 pages of this thread....haha.

Looks like the red overlay w/ cutout then a layer of the 6/10 over the whole thing (no cutout).

Shohin · 11-20-2012, 03:57 PM

Quote:

Originally Posted by jandree22

Love this layout. My concern/question... given the stock turn signal glows amber, is the red overlay enough to convert it to a pure red, or does it come through with a tinge of orange (red+yellow)?

Did this ever get answered?

ssrx · 11-20-2012, 04:11 PM

Bat, I messaged you a couple weeks ago.

Any installers in the Boston, MA area?

matsayz · 11-25-2012, 01:37 PM

Here's mine, had the local sticker guy do them for me. Grafik Impact, http://www.grafikimpact.com/

2point0 · 11-25-2012, 01:51 PM

Rad sticker! Makes me think of the badge on the FRS/GT86.

BLUEBATOVERLAYS.COM · 11-26-2012, 10:49 PM

Quote:

Originally Posted by 2point0

Looks like the red overlay w/ cutout then a layer of the 6/10 over the whole thing (no cutout).

That is correct

. Two overlays.

B@t™

BLUEBATOVERLAYS.COM · 11-26-2012, 10:50 PM

Quote:

Originally Posted by Shohin

Did this ever get answered?

It will flash red

.

B@t™

BLUEBATOVERLAYS.COM · 11-26-2012, 10:51 PM

Quote:

Originally Posted by matsayz

Here's mine, had the local sticker guy do them for me. Grafik Impact, http://www.grafikimpact.com/

Nicely done! I'll have to contact them about being an authorized installer in the Vegas area

.

B@t™

BLUEBATOVERLAYS.COM · 11-26-2012, 10:52 PM

Quote:

Originally Posted by ssrx

Bat, I messaged you a couple weeks ago.

Any installers in the Boston, MA area?

Check your pm

.

B@t™

Brahcraft · 11-30-2012, 03:20 AM

Got my overlays done by Ryan "O HELLA JDM"
down in SD and he did a great job. Thanks again man, I'll get pics up sometime been super busy.

STiieed · 12-01-2012, 05:13 PM

Any installers in Northern UT that anyone knows about?

zUnRealistiCz · 12-02-2012, 01:11 AM

Quote:

Originally Posted by FCPremixx

DSC_0454 by GriffinR, on Flickr

You're exhaust is sick. I love that look. What exhaust is that?

O HELLA JDM · 12-02-2012, 08:46 AM

Quote:

Originally Posted by Brahcraft

Got my overlays done by Ryan "O HELLA JDM"
down in SD and he did a great job. Thanks again man, I'll get pics up sometime been super busy.

cant wait for those pics breh breh!!! enjoy the vinyl man

BLUEBATOVERLAYS.COM · 12-05-2012, 02:28 PM

Quote:

Originally Posted by STiieed

Any installers in Northern UT that anyone knows about?

I have one in Sandy Utah

.

B@t™

STiieed · 12-05-2012, 04:58 PM

Well in that case I will almost certainly be ordering a set. I will send you a PM.

STiieed · 12-07-2012, 12:34 AM

PM'd!

midlifcrisis · 12-07-2012, 01:44 AM

I bought a pair of these about a year ago. the left one looked AWESOME. I screwed up the right one. Its me, not the product.

I'd like to give it another shot, does anyone know of installers in the SF Bay Area, South?

lukethy · 12-08-2012, 09:52 PM

Any thoughts on whether it matters if I install the smoke underneath the red or do I need to put the smoke over the top.

My Red overlay doesn't cover the turn/reverse cutouts but I have the smoke for the whole tail light. For some reason I don't feel right putting the smoke over the the half vinyl/half tail light if that makes any sense.

lukethy · 12-08-2012, 10:02 PM

Scratch That, Looks like I missed a post from a couple weeks ago when I scrolled through.

jackster325 · 12-11-2012, 03:48 PM

Only great things to say about the overlays. Here they are on my car.

Djent · 12-11-2012, 06:32 PM

How much does it cost to get installed from a Tint shop?

SkyeC · 12-11-2012, 09:33 PM

From my experience, most tint shops won't install pre-cut overlays. That's just a survey of the half-dozen shops I called in the East Bay around here.

dsn112 · 12-11-2012, 09:37 PM

Quote:

Originally Posted by SkyeC

From my experience, most tint shops won't install pre-cut overlays. That's just a survey of the half-dozen shops I called in the East Bay around here.

Yup, mine said same. Was the only reason i didn't buy from bat.

BLUEBATOVERLAYS.COM · 12-13-2012, 12:34 AM

Quote:

Originally Posted by lukethy

Any thoughts on whether it matters if I install the smoke underneath the red or do I need to put the smoke over the top.

My Red overlay doesn't cover the turn/reverse cutouts but I have the smoke for the whole tail light. For some reason I don't feel right putting the smoke over the the half vinyl/half tail light if that makes any sense.

Smoke on top

.

B@t™

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blue Batmobile Overlays	Fahrenheit	New England Impreza Club Forum -- NESIC	27	01-12-2012 04:21 PM
the "what otter(s) would you like to have a beer with?" thread - 2010 edition	cnw	Off-Topic	212	01-18-2010 01:02 AM
Half Tint overlays, blue batmobile, best on 06-07	patrick smith	SCIC Private Classifieds	0	10-20-2009 08:57 PM
[FS] TN One Driver Side Blue Batmobile Tailight Overlay	T1mmmy	Private 'For Sale' Classifieds	6	05-14-2006 12:51 AM
Blue Batmobile Smoked Overlays (Pics) :)	Burton4g63	Interior & Exterior Modification	10	11-01-2005 01:37 PM

11-20-2012, 01:37 AM	#651
olenderc Scooby Newbie Member#: 338384 Join Date: Nov 2012 Chapter/Region: NESIC Location: CT Vehicle: 2013 Impreza WRX World Rally Blue	http://s2.beta.photobucket.com/user/...t308c.jpg.html In regards to this overlay, do you now make this color scheme as one "smoked redout overlay" where this color is achieved through a single overlay or is it the red overlay with a second 3/10 tint over it, or a 6/10 over it, I couldn't tell. I just went through the entire 26 pages of this thread....haha. * Registered users of the site do not see these ads.

11-20-2012, 04:11 PM	#654
ssrx Scooby Newbie Member#: 335434 Join Date: Oct 2012 Vehicle: 2013 WRX 5-Door WRB	Bat, I messaged you a couple weeks ago. Any installers in the Boston, MA area?

11-25-2012, 01:37 PM	#655
matsayz Scooby Newbie Member#: 316693 Join Date: Apr 2012 Chapter/Region: SWIC Location: Las Vegas Vehicle: 2012 WRX WRB	Here's mine, had the local sticker guy do them for me. Grafik Impact, http://www.grafikimpact.com/

11-25-2012, 01:51 PM	#656
2point0 Scooby Specialist Member#: 150248 Join Date: May 2007 Chapter/Region: SCIC Location: San Diego-ish Vehicle: '13 BRZ Ltd WRB '67 Mustang	Rad sticker! Makes me think of the badge on the FRS/GT86.

11-30-2012, 03:20 AM	#661
Brahcraft Scooby Newbie Member#: 336179 Join Date: Oct 2012	Got my overlays done by Ryan "O HELLA JDM" down in SD and he did a great job. Thanks again man, I'll get pics up sometime been super busy.

12-01-2012, 05:13 PM	#662
STiieed Scooby Newbie Member#: 308680 Join Date: Jan 2012 Chapter/Region: RMIC Location: Davis, Ut Vehicle: 08 STi OBP	Any installers in Northern UT that anyone knows about?

12-05-2012, 04:58 PM	#666
STiieed Scooby Newbie Member#: 308680 Join Date: Jan 2012 Chapter/Region: RMIC Location: Davis, Ut Vehicle: 08 STi OBP	Well in that case I will almost certainly be ordering a set. I will send you a PM.

12-07-2012, 12:34 AM	#667
STiieed Scooby Newbie Member#: 308680 Join Date: Jan 2012 Chapter/Region: RMIC Location: Davis, Ut Vehicle: 08 STi OBP	PM'd!

12-07-2012, 01:44 AM	#668
midlifcrisis Scooby Newbie Member#: 277518 Join Date: Mar 2011	I bought a pair of these about a year ago. the left one looked AWESOME. I screwed up the right one. Its me, not the product. I'd like to give it another shot, does anyone know of installers in the SF Bay Area, South?

12-08-2012, 09:52 PM	#669
lukethy Scooby Newbie Member#: 332977 Join Date: Sep 2012 Chapter/Region: SCIC Location: Winchester Vehicle: 2013 WRX Hatch WR Blue	Any thoughts on whether it matters if I install the smoke underneath the red or do I need to put the smoke over the top. My Red overlay doesn't cover the turn/reverse cutouts but I have the smoke for the whole tail light. For some reason I don't feel right putting the smoke over the the half vinyl/half tail light if that makes any sense.

12-08-2012, 10:02 PM	#670
lukethy Scooby Newbie Member#: 332977 Join Date: Sep 2012 Chapter/Region: SCIC Location: Winchester Vehicle: 2013 WRX Hatch WR Blue	Scratch That, Looks like I missed a post from a couple weeks ago when I scrolled through.

12-11-2012, 03:48 PM	#671
jackster325 Scooby Newbie Member#: 310799 Join Date: Feb 2012 Location: West Covina	Only great things to say about the overlays. Here they are on my car.

12-11-2012, 06:32 PM	#672
Djent Scooby Newbie Member#: 335681 Join Date: Oct 2012 Chapter/Region: International	How much does it cost to get installed from a Tint shop?

12-11-2012, 09:33 PM	#673
SkyeC Scooby Newbie Member#: 94323 Join Date: Aug 2005 Chapter/Region: BAIC Location: Oakland Vehicle: 2012 WRX SWP	From my experience, most tint shops won't install pre-cut overlays. That's just a survey of the half-dozen shops I called in the East Bay around here.