What did you do to your car today? v2.0 - Page 117

EvileyeZ88 · 09-24-2012, 12:37 PM

Exactly, I knew there were going to be problems from the get go.

Once I get the new lateral links I'll probably go to spherical end links.
Maybe I'll make some.

The kartboys are nice, but I feel like they still give a little slop.

~Evil

* Registered users of the site do not see these ads.

lilblue619 · 09-24-2012, 01:15 PM

Installed my lip this morning now I'm gonna wash away the dust and dirt from the West Virginia roads

ForumRunner_20120924_131453.jpg

sjs0433 · 09-24-2012, 01:28 PM

^was that a real or replica v-limited lip? If replica, what brand? I'm looking for one and I think my first car had the Mach V lip and there were a few places it sagged more than I'd like.

lilblue619 · 09-24-2012, 02:55 PM

Quote:

Originally Posted by sjs0433

^was that a real or replica v-limited lip? If replica, what brand? I'm looking for one and I think my first car had the Mach V lip and there were a few places it sagged more than I'd like.

Jna replica v limited lip.

EvileyeZ88 · 09-24-2012, 02:59 PM

Found this little fellow at Walmart last night.

I don't know what an STI has to do with a ceramic heater, but this company does

prescottn6ft7 · 09-24-2012, 03:09 PM

Quote:

Originally Posted by lilblue619

Installed my lip this morning now I'm gonna wash away the dust and dirt from the West Virginia roads

Attachment 69266

Was that WRB paint from a rattle can? What paint and clear did you use? It came out great.

Smurftastic · 09-24-2012, 03:13 PM

I upgraded the security system, CCW and a Glock 23

lilblue619 · 09-24-2012, 03:50 PM

Quote:

Originally Posted by prescottn6ft7

Was that WRB paint from a rattle can? What paint and clear did you use? It came out great.

Yeah I sanded it down sprayed primer from a can then sanded it again. I used the wrb paint from grimmspeed then used some clear from advance auto. Multiple coats of each. thank you.

GiRaff3 · 09-24-2012, 04:01 PM

Cobb AP Stage 1 during lunch at work. Eager to see how she drives home

sjs0433 · 09-24-2012, 04:04 PM

I loaded the APmanager software onto my laptop last night and saw there was a firmware update for the AP. Tried to do it and it failed and now I can't get my AP to connect to my laptop. I'm hoping I didn't jack it up.

prescottn6ft7 · 09-25-2012, 01:05 PM

Quote:

Originally Posted by sjs0433

I loaded the APmanager software onto my laptop last night and saw there was a firmware update for the AP. Tried to do it and it failed and now I can't get my AP to connect to my laptop. I'm hoping I didn't jack it up.

Definitely want to get on the Cobb forums for this one.

EvasionOfTruth · 09-25-2012, 06:21 PM

Noticed this when leaving work....

mhoerath · 09-25-2012, 08:05 PM

installed my superbrite led backup lights, dome light and rear hatch light. and found out i have the wrong ones for the map lights - returned and re-odered - should've checked nasioc.

the led's are bad a**. maybe i should do some interior and undercar accents.

marios03wrx · 09-25-2012, 09:38 PM

Quote:

Originally Posted by mhoerath

installed my superbrite led backup lights, dome light and rear hatch light. and found out i have the wrong ones for the map lights - returned and re-odered - should've checked nasioc.

the led's are bad a**. maybe i should do some interior and undercar accents.

Less talk more pics! :-)
I would really like to see kind sir.

Mario

EvileyeZ88 · 09-25-2012, 10:17 PM

I picked this up for it today.

Kinugawa 3.25" inlet anti-surge 20G compressor cover

ImNOrobo · 09-25-2012, 10:33 PM

Is it installed yet?

I see sunlight in the pic, its 1030 now, plenty of time to have put it on.

EvileyeZ88 · 09-25-2012, 10:58 PM

Quote:

Originally Posted by ImNOrobo

Is it installed yet?

I see sunlight in the pic, its 1030 now, plenty of time to have put it on.

Still have to finish my TGV deletes, sandblasting and ceramic coating the turbo chra, then reassembling the turbo. Then I need to get it all balanced.

I also need to get fuel rails and pressure regulator to finish my pile of parts, I would say about a month before its all together.

I also snapped an endlink mounting tab the other day. So now I'm looking to replace trailing arms and lateral links.

Oh to own a Subaru

~Evil

God&Sme · 09-26-2012, 12:53 AM

Quote:

Originally Posted by mhoerath

installed my superbrite led backup lights, dome light and rear hatch light. and found out i have the wrong ones for the map lights - returned and re-odered - should've checked nasioc.

the led's are bad a**. maybe i should do some interior and undercar accents.

Mark u running HID's? I met a guy down here who makes led lights for all the local tuners for cheap n supposedly are great. I would love to grab some but think it might look dumb w/o HID's up front. Thoughts?

mhoerath · 09-26-2012, 06:41 AM

Quote:

Originally Posted by God&Sme

Mark u running HID's? I met a guy down here who makes led lights for all the local tuners for cheap n supposedly are great. I would love to grab some but think it might look dumb w/o HID's up front. Thoughts?

jes led's in dome/backup/map lights. hids are brighter but to me a bit expensive and complicated, and extra weight.

DKDunn04 · 09-26-2012, 12:05 PM

Stripped off the plastidip, it was just too bright for a daily. I will be respraying it a darker color soon.

ImNOrobo · 09-26-2012, 12:25 PM

How did the stripping go? I thought you liked the bright ass orange?

lilblue619 · 09-26-2012, 12:30 PM

Quote:

Originally Posted by DKDunn04

Stripped off the plastidip, it was just too bright for a daily. I will be respraying it a darker color soon.

Dam that was quick

DKDunn04 · 09-26-2012, 12:50 PM

Stripping went well, just have to clean up the edges. The other thing I found with the brighter colors of plasti dip was that it stains (dead bugs, brake dust), so a darker color will hide that better.

ImNOrobo · 09-26-2012, 09:26 PM

I started this today. Something I have been wanting to do for quite awhile. Obviously this a template. Tomorrow I will continue and hopefully finish.

Horner · 09-26-2012, 10:40 PM

Quote:

Originally Posted by ImNOrobo

I started this today. Something I have been wanting to do for quite awhile. Obviously this a template. Tomorrow I will continue and hopefully finish.

Props for making your own diffuser. I take it you are gonna use aluminum? I'd like to make one for my bugeye but it would look awful until it went lower.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What did you do to your car today?	Jester808	Texas Impreza Club Forum -- TXIC	2952	Today 01:18 AM
what did you do to your car today?	Schrecken	Bay Area Impreza Club Forum -- BAIC	11	09-25-2012 03:08 AM
What did you do to your Scoob today?	Sheehan	North West Impreza Club Forum -- NWIC	27	11-23-2007 12:02 PM

09-24-2012, 12:37 PM	#2901
EvileyeZ88 Scooby Specialist Member#: 233501 Join Date: Dec 2009 Chapter/Region: MAIC Location: Fairfax Va, Henrico Va Vehicle: 07AD 337/335SAXWAGON 99 outback sport	Exactly, I knew there were going to be problems from the get go. Once I get the new lateral links I'll probably go to spherical end links. Maybe I'll make some. The kartboys are nice, but I feel like they still give a little slop. ~Evil * Registered users of the site do not see these ads.

09-24-2012, 01:15 PM	#2902
lilblue619 NASIOC Supporter Member#: 288292 Join Date: Jul 2011 Chapter/Region: MAIC Location: arbutus md Vehicle: 2004 sti wrb. the blue one.	Installed my lip this morning now I'm gonna wash away the dust and dirt from the West Virginia roads ForumRunner_20120924_131453.jpg

09-24-2012, 01:28 PM	#2903
sjs0433 Scooby Specialist Member#: 86061 Join Date: Apr 2005 Chapter/Region: MAIC	^was that a real or replica v-limited lip? If replica, what brand? I'm looking for one and I think my first car had the Mach V lip and there were a few places it sagged more than I'd like.

09-24-2012, 02:59 PM	#2905
EvileyeZ88 Scooby Specialist Member#: 233501 Join Date: Dec 2009 Chapter/Region: MAIC Location: Fairfax Va, Henrico Va Vehicle: 07AD 337/335SAXWAGON 99 outback sport	Found this little fellow at Walmart last night. I don't know what an STI has to do with a ceramic heater, but this company does

09-24-2012, 03:13 PM	#2907
Smurftastic Scooby Specialist Member#: 243697 Join Date: Apr 2010 Chapter/Region: MAIC Location: Virginia Vehicle: 02 Stg2+ WRX Top Scoob 031	I upgraded the security system, CCW and a Glock 23

09-24-2012, 04:01 PM	#2909
GiRaff3 Scooby Newbie Member#: 330747 Join Date: Aug 2012 Chapter/Region: MAIC Location: Poconos, PA Vehicle: 2006 Legacy GT Silver/Black	Cobb AP Stage 1 during lunch at work. Eager to see how she drives home

09-24-2012, 04:04 PM	#2910
sjs0433 Scooby Specialist Member#: 86061 Join Date: Apr 2005 Chapter/Region: MAIC	I loaded the APmanager software onto my laptop last night and saw there was a firmware update for the AP. Tried to do it and it failed and now I can't get my AP to connect to my laptop. I'm hoping I didn't jack it up.

09-25-2012, 06:21 PM	#2912
EvasionOfTruth Scooby Specialist Member#: 13282 Join Date: Dec 2001 Chapter/Region: MAIC Location: Richmond, VA Vehicle: 2007 FXT WRB SPB Edition	Noticed this when leaving work....

09-25-2012, 08:05 PM	#2913
mhoerath Scooby Specialist Member#: 131379 Join Date: Nov 2006 Chapter/Region: MAIC Location: richmond, va Vehicle: 2003 354 ftlb@3k rpm justablue hatch	installed my superbrite led backup lights, dome light and rear hatch light. and found out i have the wrong ones for the map lights - returned and re-odered - should've checked nasioc. the led's are bad a**. maybe i should do some interior and undercar accents.

09-25-2012, 10:17 PM	#2915
EvileyeZ88 Scooby Specialist Member#: 233501 Join Date: Dec 2009 Chapter/Region: MAIC Location: Fairfax Va, Henrico Va Vehicle: 07AD 337/335SAXWAGON 99 outback sport	I picked this up for it today. Kinugawa 3.25" inlet anti-surge 20G compressor cover

09-25-2012, 10:33 PM	#2916
ImNOrobo Scooby Specialist Member#: 255716 Join Date: Aug 2010 Chapter/Region: NWIC Location: World famous Springfield. Vehicle: 04.5 v9 STI in wrx clothing, covered in PSM.	Is it installed yet? I see sunlight in the pic, its 1030 now, plenty of time to have put it on.

09-26-2012, 12:05 PM	#2920
DKDunn04 Scooby Specialist Member#: 275640 Join Date: Mar 2011 Chapter/Region: MAIC Location: Newport News Vehicle: 1968 Corvette-Yellow 2004 STI-Silver	Stripped off the plastidip, it was just too bright for a daily. I will be respraying it a darker color soon.

09-26-2012, 12:25 PM	#2921
ImNOrobo Scooby Specialist Member#: 255716 Join Date: Aug 2010 Chapter/Region: NWIC Location: World famous Springfield. Vehicle: 04.5 v9 STI in wrx clothing, covered in PSM.	How did the stripping go? I thought you liked the bright ass orange?

09-26-2012, 12:50 PM	#2923
DKDunn04 Scooby Specialist Member#: 275640 Join Date: Mar 2011 Chapter/Region: MAIC Location: Newport News Vehicle: 1968 Corvette-Yellow 2004 STI-Silver	Stripping went well, just have to clean up the edges. The other thing I found with the brighter colors of plasti dip was that it stains (dead bugs, brake dust), so a darker color will hide that better.

09-26-2012, 09:26 PM	#2924
ImNOrobo Scooby Specialist Member#: 255716 Join Date: Aug 2010 Chapter/Region: NWIC Location: World famous Springfield. Vehicle: 04.5 v9 STI in wrx clothing, covered in PSM.	I started this today. Something I have been wanting to do for quite awhile. Obviously this a template. Tomorrow I will continue and hopefully finish.