What did you do to your car today? v2.0 - Page 35

RossLH · 04-17-2012, 10:22 PM

* Registered users of the site do not see these ads.

bluemax189 · 04-17-2012, 10:22 PM

Quote:

Originally Posted by bluemax189

installed my brembos finally!

Pics in my build thread. http://forums.nasioc.com/forums/show....php?t=2338194

Quick pic since my thread never gets comments.

infinite012 · 04-17-2012, 10:28 PM

Quote:

Originally Posted by 96accord

Front looks good

Good Luck with the rear!!

Thanks. Looks like I'll need all the luck I can get.

My arms feel like they're gonna fall off.

96accord · 04-17-2012, 10:30 PM

Quote:

Originally Posted by infinite012

Thanks. Looks like I'll need all the luck I can get.

My arms feel like they're gonna fall off.

I got my rotors, pad, lines and fluid from Boston Motorsports on Friday. Buddy is going to install them for me on Thursday

2011WRblueSTi · 04-18-2012, 08:37 PM

got my invidia Q300 ti-tipped catback in yesterday (free next day shipping) and now im just staring at it, and other parts, sitting in the garage waiting for a car to be mounted on.

loaded up the OTS maps on my cobb ap and then put it back in its box.

waiting sucks

STiWanabe · 04-18-2012, 08:51 PM

Quote:

Originally Posted by 2011WRblueSTi

got my invidia Q300 ti-tipped catback in yesterday (free next day shipping) and now im just staring at it, and other parts, sitting in the garage waiting for a car to be mounted on.

loaded up the OTS maps on my cobb ap and then put it back in its box.

waiting sucks

lol, you got the parts before the car? thats rare.

bluemax189 · 04-18-2012, 09:42 PM

Quote:

Originally Posted by 2011WRblueSTi

got my invidia Q300 ti-tipped catback in yesterday (free next day shipping) and now im just staring at it, and other parts, sitting in the garage waiting for a car to be mounted on.

loaded up the OTS maps on my cobb ap and then put it back in its box.

waiting sucks

Love my q300. I'm sure you will too!

96accord · 04-18-2012, 09:55 PM

2011WRblueSTi: When are you suppose to get it?

DUBL URX · 04-18-2012, 09:55 PM

Quote:

Originally Posted by bluemax189

Quick pic since my thread never gets comments.

Strong want! my poor stockers are painted red but nowhere near as sexy...

Today I jumped my roomie's car with the subie... rainy day off... never left the house... never even really got dressed...

infinite012 · 04-18-2012, 10:08 PM

Good lord. Me and Uncle Tattoo finally finished up the rear rotors about 30 minutes ago. That was just about 1 hour of actual work and 2 hours of swearing at 2 seized/loctittied rear caliper bolts that just wouldn't come out.

Also swapped out the stripped front stud with a new one that ppayer38 got for me with a quickness (thanks for the hookup!) and decided to use OEM nuts on the rear wheels and the Kics r40 nuts in the front. For now...

2011WRblueSTi · 04-18-2012, 10:49 PM

Quote:

Originally Posted by STiWanabe

lol, you got the parts before the car? thats rare.

Would have done the same with my 2011 STi but I somehow managed to walk in and drive out with that car, no waiting.

2011WRblueSTi · 04-18-2012, 10:50 PM

Quote:

Originally Posted by bluemax189

Love my q300. I'm sure you will too!

I already know i will. This is my 3rd q300 catback. <3 invidia

2011WRblueSTi · 04-18-2012, 10:51 PM

Quote:

Originally Posted by 96accord

2011WRblueSTi: When are you suppose to get it?

SOA says June but my dealer says anytime from April 23rd to 1st or 2nd weeks of May.

TAPOUT · 04-18-2012, 11:09 PM

Today was a good day for my car. I made my final payment and paid it off! No more car payments! I also bought some new AEM gauges (50PSI boost, Oil Pressure), an ATI gauge pod, and a harness bar. I also finished dialing in the new Hallman Boost Controller with the cockpit controller.

Uncle Tattoo · 04-18-2012, 11:19 PM

Quote:

Originally Posted by TAPOUT

Today was a good day for my car. I made my final payment and paid it off! No more car payments! I also bought some new AEM gauges (50PSI boost, Oil Pressure), an ATI gauge pod, and a harness bar. I also finished dialing in the new Hallman Boost Controller with the cockpit controller.

It was not a great feeling til the title came for me. It was my 5 year trophy lol. Congrats!

Ham02wrx · 04-19-2012, 12:43 PM

got rid of my p0304 code with a simple can of seafoam and a new tank of gas

infinite012 · 04-19-2012, 08:36 PM

Took pictures of my new rotors!

Flat-4-Life · 04-19-2012, 08:42 PM

just put on my new tow hook it looks good maybe even a little ricey. but i like it

2011WRblueSTi · 04-19-2012, 08:54 PM

cleaned the license plate, removed the old registration sticker and put the new one on.
i feel very accomplished.

presidential · 04-20-2012, 02:01 PM

Timing belt, front main seal, water pump, all idler pullies, valve cover gaskets, plugs and some cleaning. I'm exhausted.

mangostick · 04-20-2012, 02:49 PM

Flashed a new map.. more timing/fuel ftw.

ppayer38 · 04-20-2012, 05:15 PM

Quote:

Originally Posted by mangostick

Flashed a new map.. more timing/fuel ftw.

Do you have a WB yet? I'm very intrested in seeing the results!

Can you format your logs into Excel or OpenOffice? Just wanna see em and run a VD or Airboy on em

sky3 · 04-20-2012, 05:20 PM

Changed my tranny/diff fluid.

Always fun with the rear diff.

God&Sme · 04-20-2012, 05:24 PM

Quote:

Originally Posted by ppayer38

Can you format your logs into Excel or OpenOffice? Just wanna see em and run a VD or Airboy on em

you need to make sure to log a few key parameters, no?

ppayer38 · 04-20-2012, 05:40 PM

Quote:

Originally Posted by God&Sme

you need to make sure to log a few key parameters, no?

Most everything he logs anyway I'm sure. Boost, both knocks, rpm, afr, throttle, IAM, and total timing

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What did you do to your car today?	Jester808	Texas Impreza Club Forum -- TXIC	2958	Today 12:11 AM
what did you do to your car today?	Schrecken	Bay Area Impreza Club Forum -- BAIC	11	09-25-2012 03:08 AM
What did you do to your Scoob today?	Sheehan	North West Impreza Club Forum -- NWIC	27	11-23-2007 12:02 PM

04-17-2012, 10:22 PM	#851
RossLH NASIOC Supporter Member#: 147839 Join Date: May 2007 Chapter/Region: MAIC Location: MD Vehicle: 2003 WRX SRP	* Registered users of the site do not see these ads.

04-18-2012, 08:37 PM	#855
2011WRblueSTi Scooby Specialist Member#: 275851 Join Date: Mar 2011 Chapter/Region: MAIC Location: PA Vehicle: 2012 STi hatch SWP	got my invidia Q300 ti-tipped catback in yesterday (free next day shipping) and now im just staring at it, and other parts, sitting in the garage waiting for a car to be mounted on. loaded up the OTS maps on my cobb ap and then put it back in its box. waiting sucks

04-18-2012, 09:55 PM	#858
96accord Scooby Guru Member#: 145105 Join Date: Apr 2007 Chapter/Region: MAIC Location: Maryland Vehicle: 2007 WRB WRX Limited	2011WRblueSTi: When are you suppose to get it?

04-18-2012, 10:08 PM	#860
infinite012 Scooby Specialist Member#: 74392 Join Date: Nov 2004 Chapter/Region: MAIC Location: Virginia Vehicle: 2013 BRZ DGM	Good lord. Me and Uncle Tattoo finally finished up the rear rotors about 30 minutes ago. That was just about 1 hour of actual work and 2 hours of swearing at 2 seized/loctittied rear caliper bolts that just wouldn't come out. Also swapped out the stripped front stud with a new one that ppayer38 got for me with a quickness (thanks for the hookup!) and decided to use OEM nuts on the rear wheels and the Kics r40 nuts in the front. For now...

04-18-2012, 11:09 PM	#864
TAPOUT Scooby Specialist Member#: 127670 Join Date: Sep 2006 Chapter/Region: MAIC Location: Springfield, VA Vehicle: 2007 HTA GT3794 Darton Sleeved	Today was a good day for my car. I made my final payment and paid it off! No more car payments! I also bought some new AEM gauges (50PSI boost, Oil Pressure), an ATI gauge pod, and a harness bar. I also finished dialing in the new Hallman Boost Controller with the cockpit controller.

04-19-2012, 12:43 PM	#866
Ham02wrx Scooby Newbie Member#: 255937 Join Date: Aug 2010 Chapter/Region: MAIC Location: Virginia Beach, Va Vehicle: 02 Impreza WRX WRX Rally Blue	got rid of my p0304 code with a simple can of seafoam and a new tank of gas

04-19-2012, 08:36 PM	#867
infinite012 Scooby Specialist Member#: 74392 Join Date: Nov 2004 Chapter/Region: MAIC Location: Virginia Vehicle: 2013 BRZ DGM	Took pictures of my new rotors!

04-19-2012, 08:42 PM	#868
Flat-4-Life Scooby Newbie Member#: 233070 Join Date: Dec 2009 Chapter/Region: MAIC Location: SOMD Vehicle: 1999 Impreza 2.5rs Aspin White	just put on my new tow hook it looks good maybe even a little ricey. but i like it

04-19-2012, 08:54 PM	#869
2011WRblueSTi Scooby Specialist Member#: 275851 Join Date: Mar 2011 Chapter/Region: MAIC Location: PA Vehicle: 2012 STi hatch SWP	cleaned the license plate, removed the old registration sticker and put the new one on. i feel very accomplished.

04-20-2012, 02:01 PM	#870
presidential Scooby Newbie Member#: 221870 Join Date: Aug 2009 Chapter/Region: MAIC Location: Woodstock, VA Vehicle: 2003 WRX, NA Miata WRB - Red	Timing belt, front main seal, water pump, all idler pullies, valve cover gaskets, plugs and some cleaning. I'm exhausted.

04-20-2012, 02:49 PM	#871
mangostick Scooby Specialist Member#: 256936 Join Date: Sep 2010 Chapter/Region: MAIC Location: failginia breach Vehicle: 2013 FRS pearl white beetches!	Flashed a new map.. more timing/fuel ftw.

04-20-2012, 05:20 PM	#873
sky3 Scooby Specialist Member#: 216829 Join Date: Jul 2009 Chapter/Region: Tri-State Location: Middletown, NY Vehicle: 2006 Forester 2006 Honda CBR600 F4i	Changed my tranny/diff fluid. Always fun with the rear diff.