Gunz Thread; Round 2! - Page 33

OneBadPig · 03-15-2013, 11:25 PM

Quote:

Originally Posted by Spider Pig

Actually, ATI's Omni lowers are very good. New Frontier's lowers don't have as thick of walls and their pin holes are normal diameter, making their builds slightly loose. Omni lowers have smaller holes, which cuts down on wear issues and gives a very tight fitment.

I have been wondering if a polymer lower would be better(or not) with a piston upper.

* Registered users of the site do not see these ads.

Spider Pig · 03-15-2013, 11:52 PM

Quote:

Originally Posted by OneBadPig

I have been wondering if a polymer lower would be better(or not) with a piston upper.

I don't think they would be any better or worse than a metal lower. Polymer lowers are, in general, just less expensive to manufacture, but don't offer much of a difference when it comes to pros and cons for certain builds besides lower cost and slight weight savings.

For an AR pistol, I'd absolutely recommend one due to the few ounces you'd lose. For a piston build, I don't think you would see much benefit or negative in using one.

RallyNavvie · 03-16-2013, 02:19 PM

If anyone spots any Reloder 15 powder anywhere in DFW let me know. Gunmaster and Cabela's are out for a while and I don't like paying the hazmat fees for shipping.

vudu182 · 03-25-2013, 03:19 PM

I'm taking the SBR plunge with a MK18 mod 1 build. Paperwork has been sent, and now comes the wait.

oakcliff · 03-25-2013, 03:34 PM

I have a Glock 17 that I no longer need. Please PM me for details.

RallyNavvie · 03-25-2013, 04:03 PM

Quote:

Originally Posted by vudu182

I'm taking the SBR plunge with a MK18 mod 1 build. Paperwork has been sent, and now comes the wait.

Trust or local CLEO approval? Tomorrow is 6 months since my Form 4 went pending. Hoping for a call this week from my Class 3 dealer!

vudu182 · 03-25-2013, 05:20 PM

Quote:

Originally Posted by RallyNavvie

Trust or local CLEO approval? Tomorrow is 6 months since my Form 4 went pending. Hoping for a call this week from my Class 3 dealer!

Lucky! I went the trust route since it seemed like the easier (but more expensive) option. I've heard that I could get a CLEO to sign off in Tarrant county, but with the trust I can eventually add a suppressor.

RallyNavvie · 03-26-2013, 08:32 PM

I just placed a Midway order for a new cheekpad and some mags for my .308. I also ordered a mirage cover from TBAC

Spider Pig · 03-26-2013, 09:50 PM

Quote:

Originally Posted by vudu182

Lucky! I went the trust route since it seemed like the easier (but more expensive) option. I've heard that I could get a CLEO to sign off in Tarrant county, but with the trust I can eventually add a suppressor.

With the trust, you can add almost anything you want. Like, say, a FA lower.

Subaru_Freak · 03-29-2013, 01:24 AM

I've launched a new website!

http://www.texasgunads.com

Like us on Facebook too. https://www.facebook.com/TexasGunAds

txjunglist · 03-30-2013, 12:44 PM

yeah LEO approval suck. they can revoke and take the weapon from you. effff that. I got my paperwork done about 1 month after rallynavie. i'm expecting a letter next month.

Looking for a 10" larue handrail . msg me if you have or know where to get one. other than larue of course.

RallyNavvie · 04-01-2013, 08:42 PM

The Easter Bunny brought me a tax stamp:

txjunglist · 04-01-2013, 09:41 PM

davids cans are so nice. congrats ! mine is next yay!

Spider Pig · 04-01-2013, 10:27 PM

Quote:

Originally Posted by RallyNavvie

The Easter Bunny brought me a tax stamp:

Awesome, congrats dude! I can almost remember when you started the paperwork, but my old age is getting to me..

RallyNavvie · 04-02-2013, 08:15 AM

Quote:

Originally Posted by txjunglist

davids cans are so nice. congrats ! mine is next yay!

Actually it's a TBAC. David did my transfer and I brought over the new mirage covers that TBAC is selling instead of TAB these days so he could look them over. You almost can't do a transfer with him without talking shop, and the guy knows tons. Really the only reason I went TBAC is for the brake attachment (and I got a really good deal on mine), but I got to see the new QD/BA design he's working on and it looks really cool.

Did you get a Tigershark from him?

txjunglist · 04-02-2013, 08:04 PM

no can yet. I bought a LMT 10.5 upper and a aimpoint comp m4s from him.

do you own a good drag bag? if not I can get you fixed up with a tac ops bag. best Ive ever seen. has a special compartment for your can. if you want to see it let me know,

RallyNavvie · 04-02-2013, 08:18 PM

I picked up one of Midway's as their largest one is able to fit my 51" cannon and the .308 at the same time. It has tons of pockets, I think there's an internal one that fits a can, I just haven't explored it enough. I looked up the Tac Ops bag and it looks very similar to the Midway one.

finnRex · 04-02-2013, 08:42 PM

Since people can't obey the rules( no gun sales) , I'm locking this up.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fortune Auto Coilovers ROUND 2!! Round 1 Pics are UP!	7L Autosport	Vendor 'Group Buy' Classifieds	114	12-17-2011 05:39 PM
BLOW OUT SALE ROUND 2! Gaskets, 2.5 Short Block, JDM TGV's, 08 SPT Catbacks!!!	RenickMotorsports	Engine/Power/Exhaust	10	05-17-2008 01:44 PM
fp green/2.0...round 2	rallyrab	Factory 2.0L Turbo Powertrain	8	11-15-2007 01:04 PM
Round 2 Headlight covers for queen/rallispec meet.	munkis	Tri-State Area Forum	8	02-07-2002 05:48 PM
Me vs. Weapon*R intake round 2	AccidenT	Normally Aspirated Powertrain	3	12-18-2000 12:27 AM

03-16-2013, 02:19 PM	#803
RallyNavvie Scooby Specialist Member#: 7113 Join Date: Jun 2001 Chapter/Region: TXIC Location: Minnesotan in Texas Vehicle: 2008 Spec B DGM	If anyone spots any Reloder 15 powder anywhere in DFW let me know. Gunmaster and Cabela's are out for a while and I don't like paying the hazmat fees for shipping.

03-25-2013, 03:19 PM	#804
vudu182 Scooby Specialist Member#: 147876 Join Date: May 2007 Chapter/Region: TXIC Location: Sometimes you're the hammer... Vehicle: But sometimes you're the anvil.	I'm taking the SBR plunge with a MK18 mod 1 build. Paperwork has been sent, and now comes the wait.

03-25-2013, 03:34 PM	#805
oakcliff Scooby Specialist Member#: 273767 Join Date: Feb 2011 Chapter/Region: TXIC Location: Dallas Texas Vehicle: 2011 WRX Red	I have a Glock 17 that I no longer need. Please PM me for details.

03-26-2013, 08:32 PM	#808
RallyNavvie Scooby Specialist Member#: 7113 Join Date: Jun 2001 Chapter/Region: TXIC Location: Minnesotan in Texas Vehicle: 2008 Spec B DGM	I just placed a Midway order for a new cheekpad and some mags for my .308. I also ordered a mirage cover from TBAC

03-29-2013, 01:24 AM	#810
Subaru_Freak Scooby Newbie Member#: 25667 Join Date: Oct 2002 Chapter/Region: TXIC Location: Austin, Tx Vehicle: 2011 STI 5-Dr. PBP	I've launched a new website! http://www.texasgunads.com Like us on Facebook too. https://www.facebook.com/TexasGunAds

03-30-2013, 12:44 PM	#811
txjunglist Scooby Specialist Member#: 11926 Join Date: Nov 2001 Location: Allen, Tx Vehicle: 2011 Outback Limited Dark Grey	yeah LEO approval suck. they can revoke and take the weapon from you. effff that. I got my paperwork done about 1 month after rallynavie. i'm expecting a letter next month. Looking for a 10" larue handrail . msg me if you have or know where to get one. other than larue of course.

04-01-2013, 08:42 PM	#812
RallyNavvie Scooby Specialist Member#: 7113 Join Date: Jun 2001 Chapter/Region: TXIC Location: Minnesotan in Texas Vehicle: 2008 Spec B DGM	The Easter Bunny brought me a tax stamp:

04-01-2013, 09:41 PM	#813
txjunglist Scooby Specialist Member#: 11926 Join Date: Nov 2001 Location: Allen, Tx Vehicle: 2011 Outback Limited Dark Grey	davids cans are so nice. congrats ! mine is next yay!

04-02-2013, 08:04 PM	#816
txjunglist Scooby Specialist Member#: 11926 Join Date: Nov 2001 Location: Allen, Tx Vehicle: 2011 Outback Limited Dark Grey	no can yet. I bought a LMT 10.5 upper and a aimpoint comp m4s from him. do you own a good drag bag? if not I can get you fixed up with a tac ops bag. best Ive ever seen. has a special compartment for your can. if you want to see it let me know,

04-02-2013, 08:18 PM	#817
RallyNavvie Scooby Specialist Member#: 7113 Join Date: Jun 2001 Chapter/Region: TXIC Location: Minnesotan in Texas Vehicle: 2008 Spec B DGM	I picked up one of Midway's as their largest one is able to fit my 51" cannon and the .308 at the same time. It has tons of pockets, I think there's an internal one that fits a can, I just haven't explored it enough. I looked up the Tac Ops bag and it looks very similar to the Midway one.

04-02-2013, 08:42 PM	#818
finnRex Caps 2012 Moderator Member#: 21095 Join Date: Jul 2002 Chapter/Region: TXIC Location: Miss you, Charlie Murphy. Vehicle: RIP KTH & LMFH '09 Crystal red Tintcoat	Since people can't obey the rules( no gun sales) , I'm locking this up.