At PERRIN Performance we care enough about YOU, to put extra effort into our products and services, insuring you get the absolute best part at a great price. Drawing feedback from our past clientele, we continually review and revise our products to make them the best choice available on the market today!
We are extremely proud that most PERRIN Performance products are Made In The USA. While this does create a challenge for cost vs. goods made by our competitors overseas, we strongly believe it is the correct thing to do! Thus supporting the American economy with the use of raw materials and even more importantly labor! Keeping American’s at work is good for ALL aspects of the industry and economy. Help us in supporting the USA and buy PERRIN brand performance parts for your Subaru!
We carry a wide variety of the "bread and butter" parts that make your Subaru perform! Want to make an even larger jump in performance? Then check out our specialty parts such as PSRS, Cross Lock and Package Deals. We also cary the full H&R Suspension line. Read on to see what we have for your Subaru!
The first suspension modification we recommend is a set of stiffer sway bars. If the budget is limited we recommend at minimum a rear sway bar upgrade. In short a sway bar upgrade will keep the car flatter during a corner allowing the tires to use all their grip to get you around the corner. Sway bars are also used to "tune" the handling of your Subaru, you car is set up from the factory to under steer quite a bit. Fit a stiffer rear sway bar and you will reduce the under steer to a near neutral set up, perfect. PERRIN sway bars have multiple end link mounting positions to allow for fine tuning of the bars effectiveness. There is a lot of information and lots of different sway bar set ups so we urge you to click below to read more on the PERRIN web site.
Click Your Subaru Below To See What Sway Bars Are Available
Stiffness chart for 2002-2007 WRX Rear 22mm & 25mm Vs. Stock.
Stiffness chart for 2008-2010 WRX & STI Rear 19mm & 22mm Vs. Stock.
The PERRIN Performance Front Strut tower Brace does two things REALLY WELL 1.) Stiffens up the front suspension by bracing the front strut towers against each other to counteract chassis flex. 2.) They look really cool with the cast end feet and wrinkle powder coated cross bar, available in Black or Red.
Click Below To Check Them Out On The PERRIN Web Site
2002-2007 WRX & STI
2008-2010 WRX & STI
Let us know if you have any questions.
More Coming ....