FS/FT: (For Sale or Trade) White Rays 57U 18x8.5 +48, 5x100 w/ BFG KDW

flat4LGT · 11-04-2012, 09:57 PM

I'm getting bored of these and looking for something new and sexy, so I'm putting these up for sale. $1200 shipped +paypal takes them home.

The important parts:
Rays 57 Ultimate
18x8.5 5x100 +48 56.15 hub bore (direct Subie fitment, no centric rings required)
Custom White powder coat

As a whole, the faces of all 4 are practically flawless for white wheels with 7500 miles on them. There are a few nicks in the powdercoat on 3 of the 4 and a few blemishes from tar and crap on white wheels. I cleaned them up as best as I could, and I'm sure a little more elbow grease will take care of that.

One of the wheels met up with a chunk of road in a construction zone and has some rash on the inside of it, as noted in the picture. That wheel has the crap that discount used to mount the tire still on the inside of it (again, some elbow grease will get rid of most of it, but it's on the inside, so it's not a big deal). Some of the powdercoat got taken off with the wheel weights when they rebalanced that wheel after replacing the tire.

A little bit about these wheels in particular. They are custom everything for Subaru fitment. Specific hub bore, specific bolt pattern, specific offset. They weigh 18.5 pounds, which is really light for an 18x8.5. Only 2 sets of these in WRX fitment made it to the US that I'm aware of, and Ravspec sold them both over a year ago, so you'll probably not see another set of these on a Subaru. I took home "Most Baller Wheels" at the Midwest Stance Car Show this summer with these wheels. If you do a google image search, my exact wheels pop up on the first page.

The wheels were $400/ea, powder coat was $50/ea. But they can be yours for only $1200

I can't seem to update the title, but THIS IS FOR THE WHEELS ONLY.

And now the long awaited pics.
(the paper includes all the screen names I use on the various Subie forums)

The small nick from a chunk in the road. Again this is on the inside lip of the wheel, so no one will ever have to know about it.

Size and offset stamp

Mounted on my wagon

Best pic of them mounted on my LGT

* Registered users of the site do not see these ads.

flat4LGT · 11-05-2012, 10:33 AM

Bump it up

flat4LGT · 11-06-2012, 05:42 PM

To the top

flat4LGT · 11-07-2012, 12:19 PM

Bump them up

flat4LGT · 11-07-2012, 09:44 PM

Take them to the top. Make me an offer, worst that happens is I say no

RavSpec · 11-07-2012, 11:45 PM

That's a great deal with tires !!!! Guys don't miss out on this. Limited edition set from RAYS usa.

flat4LGT · 11-08-2012, 06:16 PM

Thanks for the bump Mark.

That endorsement should mean something since he's the king of JDM wheels

RavSpec · 11-08-2012, 06:24 PM

advertisement from Japan (** limited edition 56mm bore / 555 pieces produced)

8.5 kg (close to the weight of a FORGED wheels)

flat4LGT · 11-11-2012, 11:16 AM

Sunday bump

flat4LGT · 11-14-2012, 10:08 PM

Bump them up

flat4LGT · 11-16-2012, 10:50 PM

Price drop bump. I am willing to separate the wheels and tires if anyone is interested in one or the other.

I Like It Sideways · 11-29-2012, 09:11 AM

Bump for a great guy and kickass wheels!

Shansen120 · 11-29-2012, 11:38 AM

These are amazing wheels!
I would love to have them on my car.
How much are you asking for just the wheels?

flat4LGT · 11-29-2012, 12:30 PM

PM sent

flat4LGT · 12-05-2012, 01:26 PM

Random bump

Daviddp331 · 12-05-2012, 01:48 PM

Interested in trades?

flat4LGT · 12-05-2012, 02:39 PM

What do you have to trade? I'm interested in bumping up to an 18x9 or 9.5.

flat4LGT · 12-08-2012, 01:04 PM

Bump them up

borderguy · 12-10-2012, 06:32 PM

Damn, I wish I could snag these!

borderguy · 12-10-2012, 07:41 PM

I have my stockers listed at a low price. If I can sell those I would be in the market

fgtyper · 12-10-2012, 07:50 PM

I have a set of BBS CKs they are smaller but they look really good. they are worth the same, 18x8 +35 Brand new 225/40/18 Conti Extreme

flat4LGT · 12-10-2012, 08:26 PM

I'm interested in going wider, but those do look really clean.

flat4LGT · 12-10-2012, 08:27 PM

Quote:

Originally Posted by borderguy

I have my stockers listed at a low price. If I can sell those I would be in the market

They've got summer tires on them and I'm in Michigan, so they're not going anywhere for a while unless they get sold.

borderguy · 12-10-2012, 08:53 PM

I appreciate it man. I will keep you updated on my sale and hopefully I can take these off your hands. I am two hours from you so a pickup would be no problem. I wouldn't have to roll my rear fenders with these with a stock suspension, correct?

flat4LGT · 12-10-2012, 08:57 PM

Shouldn't be an issue on a newer WRX. I had to roll my wagon's rear fenders, but the 02-07 wagons had narrower fenders than the sedan and I'm pretty low as the pictures indicate.

11-04-2012, 09:57 PM	#1
flat4LGT Scooby Specialist Member Sales Rating: (0) Member#: 237565 Join Date: Feb 2010 Chapter/Region: MWSOC Location: East Lansing, MI Vehicle: I haz 06 WRB Wagon	White Rays 57U 18x8.5 +48, 5x100 I'm getting bored of these and looking for something new and sexy, so I'm putting these up for sale. $1200 shipped +paypal takes them home. The important parts: Rays 57 Ultimate 18x8.5 5x100 +48 56.15 hub bore (direct Subie fitment, no centric rings required) Custom White powder coat As a whole, the faces of all 4 are practically flawless for white wheels with 7500 miles on them. There are a few nicks in the powdercoat on 3 of the 4 and a few blemishes from tar and crap on white wheels. I cleaned them up as best as I could, and I'm sure a little more elbow grease will take care of that. One of the wheels met up with a chunk of road in a construction zone and has some rash on the inside of it, as noted in the picture. That wheel has the crap that discount used to mount the tire still on the inside of it (again, some elbow grease will get rid of most of it, but it's on the inside, so it's not a big deal). Some of the powdercoat got taken off with the wheel weights when they rebalanced that wheel after replacing the tire. A little bit about these wheels in particular. They are custom everything for Subaru fitment. Specific hub bore, specific bolt pattern, specific offset. They weigh 18.5 pounds, which is really light for an 18x8.5. Only 2 sets of these in WRX fitment made it to the US that I'm aware of, and Ravspec sold them both over a year ago, so you'll probably not see another set of these on a Subaru. I took home "Most Baller Wheels" at the Midwest Stance Car Show this summer with these wheels. If you do a google image search, my exact wheels pop up on the first page. The wheels were $400/ea, powder coat was $50/ea. But they can be yours for only $1200 I can't seem to update the title, but THIS IS FOR THE WHEELS ONLY. And now the long awaited pics. (the paper includes all the screen names I use on the various Subie forums) The small nick from a chunk in the road. Again this is on the inside lip of the wheel, so no one will ever have to know about it. Size and offset stamp Mounted on my wagon Best pic of them mounted on my LGT * Registered users of the site do not see these ads. Last edited by flat4LGT; 04-14-2013 at 09:01 PM.

11-07-2012, 11:45 PM	#6
RavSpec NASIOC Storefront Vendor Vendor Sales Rating: (88) Member#: 26854 Join Date: Oct 2002 Vehicle: 2002 Impreza WRX	That's a great deal with tires !!!! Guys don't miss out on this. Limited edition set from RAYS usa. __________________ [ WORK WHEELS ] [ RAYS WHEELS ] [ YOKOHAMA WHEELS ] [ WEDSSPORT WHEELS] [ FERODO ] [ BC RACING ] [ COSWORTH ] [ DBA ROTORS ] and many more! To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. TEL: 631-586-3520 EMAIL: To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

11-08-2012, 06:24 PM	#8
RavSpec NASIOC Storefront Vendor Vendor Sales Rating: (88) Member#: 26854 Join Date: Oct 2002 Vehicle: 2002 Impreza WRX	advertisement from Japan ( limited edition 56mm bore / 555 pieces produced) 8.5 kg (close to the weight of a FORGED wheels) __________________ [ WORK WHEELS ] [ RAYS WHEELS ] [ YOKOHAMA WHEELS ] [ WEDSSPORT WHEELS] [ FERODO ] [ BC RACING ] [ COSWORTH ] [ DBA ROTORS ]** and many more! To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. TEL: 631-586-3520 EMAIL: To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-05-2012, 10:33 AM	#2
flat4LGT Scooby Specialist Member Sales Rating: (0) Member#: 237565 Join Date: Feb 2010 Chapter/Region: MWSOC Location: East Lansing, MI Vehicle: I haz 06 WRB Wagon	Bump it up

11-06-2012, 05:42 PM	#3
flat4LGT Scooby Specialist Member Sales Rating: (0) Member#: 237565 Join Date: Feb 2010 Chapter/Region: MWSOC Location: East Lansing, MI Vehicle: I haz 06 WRB Wagon	To the top

11-07-2012, 12:19 PM	#4
flat4LGT Scooby Specialist Member Sales Rating: (0) Member#: 237565 Join Date: Feb 2010 Chapter/Region: MWSOC Location: East Lansing, MI Vehicle: I haz 06 WRB Wagon	Bump them up

11-07-2012, 09:44 PM	#5
flat4LGT Scooby Specialist Member Sales Rating: (0) Member#: 237565 Join Date: Feb 2010 Chapter/Region: MWSOC Location: East Lansing, MI Vehicle: I haz 06 WRB Wagon	Take them to the top. Make me an offer, worst that happens is I say no

11-08-2012, 06:16 PM	#7
flat4LGT Scooby Specialist Member Sales Rating: (0) Member#: 237565 Join Date: Feb 2010 Chapter/Region: MWSOC Location: East Lansing, MI Vehicle: I haz 06 WRB Wagon	Thanks for the bump Mark. That endorsement should mean something since he's the king of JDM wheels

11-11-2012, 11:16 AM	#9
flat4LGT Scooby Specialist Member Sales Rating: (0) Member#: 237565 Join Date: Feb 2010 Chapter/Region: MWSOC Location: East Lansing, MI Vehicle: I haz 06 WRB Wagon	Sunday bump

11-14-2012, 10:08 PM	#10
flat4LGT Scooby Specialist Member Sales Rating: (0) Member#: 237565 Join Date: Feb 2010 Chapter/Region: MWSOC Location: East Lansing, MI Vehicle: I haz 06 WRB Wagon	Bump them up

11-16-2012, 10:50 PM	#11
flat4LGT Scooby Specialist Member Sales Rating: (0) Member#: 237565 Join Date: Feb 2010 Chapter/Region: MWSOC Location: East Lansing, MI Vehicle: I haz 06 WRB Wagon	Price drop bump. I am willing to separate the wheels and tires if anyone is interested in one or the other.

11-29-2012, 09:11 AM	#12
I Like It Sideways Scooby Specialist Member Sales Rating: (5) Member#: 97707 Join Date: Oct 2005 Chapter/Region: MWSOC Location: Rockford, IL Vehicle: '01 BRP GC6 '06 SGM WRX,'91 Legacy SS	Bump for a great guy and kickass wheels!

11-29-2012, 11:38 AM	#13
Shansen120 Scooby Newbie Member Sales Rating: (0) Member#: 314156 Join Date: Mar 2012 Chapter/Region: TXIC Location: Lewisville, TX Vehicle: 2013 Forester XT SWP	These are amazing wheels! I would love to have them on my car. How much are you asking for just the wheels?

11-29-2012, 12:30 PM	#14
flat4LGT Scooby Specialist Member Sales Rating: (0) Member#: 237565 Join Date: Feb 2010 Chapter/Region: MWSOC Location: East Lansing, MI Vehicle: I haz 06 WRB Wagon	PM sent

12-05-2012, 01:26 PM	#15
flat4LGT Scooby Specialist Member Sales Rating: (0) Member#: 237565 Join Date: Feb 2010 Chapter/Region: MWSOC Location: East Lansing, MI Vehicle: I haz 06 WRB Wagon	Random bump

12-05-2012, 01:48 PM	#16
Daviddp331 Scooby Newbie Member Sales Rating: (0) Member#: 339768 Join Date: Dec 2012	Interested in trades?

12-05-2012, 02:39 PM	#17
flat4LGT Scooby Specialist Member Sales Rating: (0) Member#: 237565 Join Date: Feb 2010 Chapter/Region: MWSOC Location: East Lansing, MI Vehicle: I haz 06 WRB Wagon	What do you have to trade? I'm interested in bumping up to an 18x9 or 9.5.

12-08-2012, 01:04 PM	#18
flat4LGT Scooby Specialist Member Sales Rating: (0) Member#: 237565 Join Date: Feb 2010 Chapter/Region: MWSOC Location: East Lansing, MI Vehicle: I haz 06 WRB Wagon	Bump them up

12-10-2012, 06:32 PM	#19
borderguy Scooby Newbie Member Sales Rating: (0) Member#: 333855 Join Date: Oct 2012 Chapter/Region: MWSOC Location: Detroit Vehicle: 2012 WRX Premium OBP	Damn, I wish I could snag these!

12-10-2012, 07:41 PM	#20
borderguy Scooby Newbie Member Sales Rating: (0) Member#: 333855 Join Date: Oct 2012 Chapter/Region: MWSOC Location: Detroit Vehicle: 2012 WRX Premium OBP	I have my stockers listed at a low price. If I can sell those I would be in the market

12-10-2012, 07:50 PM	#21
fgtyper Scooby Newbie Member Sales Rating: (2) Member#: 236959 Join Date: Jan 2010 Chapter/Region: SCIC Location: OLYMPIA,WA/SAN LUIS OBISPO,CA Vehicle: 05 LGT RAINBOW	I have a set of BBS CKs they are smaller but they look really good. they are worth the same, 18x8 +35 Brand new 225/40/18 Conti Extreme

12-10-2012, 08:26 PM	#22
flat4LGT Scooby Specialist Member Sales Rating: (0) Member#: 237565 Join Date: Feb 2010 Chapter/Region: MWSOC Location: East Lansing, MI Vehicle: I haz 06 WRB Wagon	I'm interested in going wider, but those do look really clean.

12-10-2012, 08:53 PM	#24
borderguy Scooby Newbie Member Sales Rating: (0) Member#: 333855 Join Date: Oct 2012 Chapter/Region: MWSOC Location: Detroit Vehicle: 2012 WRX Premium OBP	I appreciate it man. I will keep you updated on my sale and hopefully I can take these off your hands. I am two hours from you so a pickup would be no problem. I wouldn't have to roll my rear fenders with these with a stock suspension, correct?

12-10-2012, 08:57 PM	#25
flat4LGT Scooby Specialist Member Sales Rating: (0) Member#: 237565 Join Date: Feb 2010 Chapter/Region: MWSOC Location: East Lansing, MI Vehicle: I haz 06 WRB Wagon	Shouldn't be an issue on a newer WRX. I had to roll my wagon's rear fenders, but the 02-07 wagons had narrower fenders than the sedan and I'm pretty low as the pictures indicate.