|12-03-2012, 10:42 AM||#1|
Join Date: Apr 2006
Chapter/Region: South East
Location: Raleigh, NC
Transmission has been pulled and is ready to be shipped.
I CAN EMAIL A COPY OF THE INVOICE IF YOU WANT TO SEE IT
3500 for transmission shipped (East of the mississippi)
Transmission was removed tonight....an easy 1.5 hour (luckily I have access to a lift and power tools)
So here is the deal, I have a built PPG transmission with about 12K miles on it. I always thought I would make more power on the wrx, but instead bought a z06 and am keeping the WRX for a DD.
The car was only making 230whp/250wtq on stock turbo. I have the dyno graph as well. The car was tuned the same time that the gears were installed and can been seen on the invoice.
The gears were installed by Barry over at DRACO performance. They are certified installers for PPG. I have the invoice for the gears and the complete install. I'm not even going to get into the cost.
Me pulling the transmission 1/3/2013
Here is a better video,
Full Details on Transmission:
PPG 1-4 gear set, 1-2 Straight
Cut/Synchromesh, 3-4 Helical
Cut/Synchromesh Subaru WRX 5-spd
ACT HD 6 puck sprung clutch
ACT streetlite XACT flywheel
* Registered users of the site do not see these ads.
Last edited by allblackgsrt; 01-16-2013 at 12:11 PM.
|12-03-2012, 08:04 PM||#2|
Member Sales Rating: (0)
Join Date: Sep 2012
Location: Corvallis, ORVehicle:
I'm interested in a swap. I had an 05 wrx trans..still in vehicle. 62k babied miles. I'm going big power and am waiting for the trans to hold it..