Anyone with a crank pulley removal tool?

EPskate · 12-19-2012, 05:21 PM

Anyone have one of these in the northern NJ area I could borrow/rent?

* Registered users of the site do not see these ads.

Mulder · 12-19-2012, 05:27 PM

Unless it's an auto, all you should need is the proper 3/4" socket with a long bar, and a helper to stand on the brake with the car in the highest gear.

EPskate · 12-19-2012, 05:30 PM

I'll try that, thanks

AZP Installs · 12-21-2012, 10:24 PM

You can come down to us and we'll change it for you if you can't get it on your own. It isn't terribly hard, but we have seen instances on older cars where they just did not want to come out.

-Mike Paisan

11+ Years Maintaining, Modifying and Educating TriState Subaru Enthusiasts.
Call directly as We carry almost every manufacturer now, so before you buy parts call us.
Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) | T-1 Certified Amsoil Direct Jobber |AIM: AZP Installs
"Race Tested, Enthusiast Approved!"

EPskate · 12-22-2012, 03:08 PM

Thanks, but I got it off already. In the middle of a timing belt job so can't really drive it.

12-19-2012, 05:21 PM	#1
EPskate Scooby Specialist Member#: 84800 Join Date: Apr 2005 Chapter/Region: Tri-State Location: NJ Vehicle: 02 wrx rip / 05 sti	Anyone with a crank pulley removal tool? Anyone have one of these in the northern NJ area I could borrow/rent? * Registered users of the site do not see these ads.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-19-2012, 05:27 PM	#2
Mulder Trust no one Moderator Member#: 11170 Join Date: Oct 2001 Chapter/Region: Tri-State Location: NYC Vehicle: 02 WRX 05 GTO/11 Sonata(!)	Unless it's an auto, all you should need is the proper 3/4" socket with a long bar, and a helper to stand on the brake with the car in the highest gear.

12-19-2012, 05:30 PM	#3
EPskate Scooby Specialist Member#: 84800 Join Date: Apr 2005 Chapter/Region: Tri-State Location: NJ Vehicle: 02 wrx rip / 05 sti	I'll try that, thanks

12-21-2012, 10:24 PM	#4
AZP Installs NASIOC Vendor Member#: 40160 Join Date: Jul 2003 Chapter/Region: Tri-State Location: Kenilworth, NJ (GSP 138) Vehicle: 2001 Race Tested, Enthusiast Approved!	You can come down to us and we'll change it for you if you can't get it on your own. It isn't terribly hard, but we have seen instances on older cars where they just did not want to come out. -Mike Paisan 11+ Years Maintaining, Modifying and Educating TriState Subaru Enthusiasts. Call directly as We carry almost every manufacturer now, so before you buy parts call us. Like us on Facebook! \| E-mail: sales@azpinstalls.com \| 725 Fairfield Ave \| Kenilworth, NJ 07033 \| 908.248.AZP1 (2971) \| T-1 Certified Amsoil Direct Jobber \|AIM: AZP Installs *"Race Tested, Enthusiast Approved!"*

12-22-2012, 03:08 PM	#5
EPskate Scooby Specialist Member#: 84800 Join Date: Apr 2005 Chapter/Region: Tri-State Location: NJ Vehicle: 02 wrx rip / 05 sti	Thanks, but I got it off already. In the middle of a timing belt job so can't really drive it.