which dual inlet FPR to get with my Vishnu Fuel Rails

latinskllz · 09-26-2002, 02:37 PM

I don't know what the hell I did with my FPR, but I need your comments/suggestions on what FPR to get for my Fuel Rails.

I have a TEC-II and Vishnu Fuel Rails that I will be installing anyday now but first need to get a FPR.

I believe the one I had was a Malpassi but I have seen the WRX Vishnu Rails with an SX dual Inlet FPR.

Shiv claims that the Malpassi FPR is ideal for the EJ25 but I wonder if there are any others out there that have dual inlets that will work well with my setup.

I have searched and only found Malpassi, Mallory and SX dual inlet FPR's.

ANy help is greatly appreciated.

Thanks,
Kevin

* Registered users of the site do not see these ads.

8Complex · 09-26-2002, 02:47 PM

I beleive Aeromotive makes the SX regulators, or rebadges them or something. IIRC, they're about $130 on Jegs, Summit, etc.

wcbjr · 09-26-2002, 03:02 PM

I have this one, the 15404. It is included in the Vishnu kit now.

latinskllz · 09-26-2002, 04:00 PM

Quote:

Originally posted by wcbjr

I have this one, the 15404. It is included in the Vishnu kit now.

the one in the picture looks like it has -6AN dual inlets and one -10an outlet?

Am I correct? It looks like so since teh outlet goes back to the fuel filter right?

I'm brain dead today.

Thanks,
Kevin

wcbjr · 09-26-2002, 04:22 PM

That is correct.

8Complex · 09-26-2002, 04:51 PM

Actually that pic looks to be two 10an inlets and a 6an outlet.

Austin · 09-26-2002, 05:20 PM

The SX FPR regulator currently included in the Vishnu kit comes with two -6 inlets and one -6 outlet.

I love my SX FPR - nice and rock solid fuel pressure... what else can you say?

latinskllz · 09-26-2002, 10:07 PM

Quote:

Originally posted by Austin
The SX FPR regulator currently included in the Vishnu kit comes with two -6 inlets and one -6 outlet.

I love my SX FPR - nice and rock solid fuel pressure... what else can you say?

So yours is not the one pictured above?

Austin · 09-26-2002, 10:21 PM

Mine is just like the one pictured, but with -6 AN adapters.

You can buy different metric to AN adapters, -6, -8, -10, etc.

This is mine, as it came from Vishnu -

There is one little difference... My SX FPR has a brass vacuum nipple, the one above has a red nipple...

09-26-2002, 02:37 PM	#1
latinskllz Scooby Specialist Member#: 3461 Join Date: Jan 2001 Chapter/Region: South East Location: orlando, fl, USA Vehicle: 1998 BMW M3 Coupe Estoril Bleau	which dual inlet FPR to get with my Vishnu Fuel Rails I don't know what the hell I did with my FPR, but I need your comments/suggestions on what FPR to get for my Fuel Rails. I have a TEC-II and Vishnu Fuel Rails that I will be installing anyday now but first need to get a FPR. I believe the one I had was a Malpassi but I have seen the WRX Vishnu Rails with an SX dual Inlet FPR. Shiv claims that the Malpassi FPR is ideal for the EJ25 but I wonder if there are any others out there that have dual inlets that will work well with my setup. I have searched and only found Malpassi, Mallory and SX dual inlet FPR's. ANy help is greatly appreciated. Thanks, Kevin * Registered users of the site do not see these ads.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What sways to get with my setup?	HERSHEY	Brakes, Steering & Suspension	0	06-07-2008 04:25 PM
Which turbo inlet hose to get?	Inprogress	Factory 2.5L Turbo Powertrain	11	11-12-2005 11:11 PM
which act or clutch to get with my sr55 wrx	moorebl	Transmission (AT/MT) & Driveline	3	06-04-2005 05:16 PM
Which exact spark plugs to get for my motor. 1,2,3 steps colder. Also Oil Question	STEALTH-WRX	Factory 2.0L Turbo Powertrain	23	09-20-2003 11:16 PM
Can someone please confirm the correct hoses I need to get for my Perrin Fuel Rails?	STR8OUT	Factory 2.0L Turbo Powertrain	11	04-03-2003 02:14 PM

09-26-2002, 02:47 PM	#2
8Complex Moderator Member#: 922 Join Date: Feb 2000 Chapter/Region: MWSOC Location: Schaumburg, IL Vehicle: 04 FXT Red	I beleive Aeromotive makes the SX regulators, or rebadges them or something. IIRC, they're about $130 on Jegs, Summit, etc.

09-26-2002, 03:02 PM	#3
wcbjr Scooby Guru Member#: 4001 Join Date: Feb 2001 Location: I love spherical bearings! Vehicle: 2006 Legacy GT Obsidian black	I have this one, the 15404. It is included in the Vishnu kit now.

09-26-2002, 04:22 PM	#5
wcbjr Scooby Guru Member#: 4001 Join Date: Feb 2001 Location: I love spherical bearings! Vehicle: 2006 Legacy GT Obsidian black	That is correct.

09-26-2002, 04:51 PM	#6
8Complex Moderator Member#: 922 Join Date: Feb 2000 Chapter/Region: MWSOC Location: Schaumburg, IL Vehicle: 04 FXT Red	Actually that pic looks to be two 10an inlets and a 6an outlet.

09-26-2002, 05:20 PM	#7
Austin Scooby Guru Member#: 7089 Join Date: May 2001 Chapter/Region: NWIC Location: Moscow, ID Vehicle: 05 Legacy GT Sedan 07 4Runner Limited	The SX FPR regulator currently included in the Vishnu kit comes with two -6 inlets and one -6 outlet. I love my SX FPR - nice and rock solid fuel pressure... what else can you say?

09-26-2002, 10:21 PM	#9
Austin Scooby Guru Member#: 7089 Join Date: May 2001 Chapter/Region: NWIC Location: Moscow, ID Vehicle: 05 Legacy GT Sedan 07 4Runner Limited	Mine is just like the one pictured, but with -6 AN adapters. You can buy different metric to AN adapters, -6, -8, -10, etc. This is mine, as it came from Vishnu - There is one little difference... My SX FPR has a brass vacuum nipple, the one above has a red nipple...