DIY 5 Shift Pattern/Decal

[SSJChar]

heres my TRD shifter button. its too small to put any glow in the dark anything on it, as the recessed circle is only around 2.5 cm, which is pretty good for the pebble because the pebble is 2cm. im getting someone to print it out for me tomorrow, so we'll see how it looks.
edit: nm, i can't paste links because i dont have 10 posts yet

* Registered users of the site do not see these ads.

[emorphien]

I have the momo knob on my LGT. If I take it somewhere and they need a layout, I'll print it nice and big on a piece of 8.5x11 and tape it above my radio.

Seriously I have no use for one personally, if you don't know where your gears are you're screwed.

[WRXSIG]

Originally Posted by emorphien

I have the momo knob on my LGT. If I take it somewhere and they need a layout, I'll print it nice and big on a piece of 8.5x11 and tape it above my radio.

Seriously I have no use for one personally, if you don't know where your gears are you're screwed.

your like the kind of person that would slow up the can of worms or something.....


Btw...people do this for the hell of it. and as stated above its a state law in some areas. no need to hate

[emorphien]

Originally Posted by WRXSIG

your like the kind of person that would slow up the can of worms or something.....


Btw...people do this for the hell of it. and as stated above its a state law in some areas. no need to hate

not hating, but i wouldn't want a permanent fixture of it if I could help it. Is it actually required for inspection, or do they just need to know which way to wiggle the stick (in which case the 8.5x11 works fine)?

[SSJChar]

here, in the province of saskatchewan, its required. dont know why, but it is.

[2002WRX_5speed]

Sorry for the dead link and pictures but I will repost the pics and some new other ideas.

Email me if you want this on your carr.

[pioneer_sti]

Originally Posted by emorphien

I have the momo knob on my LGT. If I take it somewhere and they need a layout, I'll print it nice and big on a piece of 8.5x11 and tape it above my radio.

Seriously I have no use for one personally, if you don't know where your gears are you're screwed.

Uh-huh.......... bahahahahahaha ........ oh man, you can always tell the people who have limited knowledge about cars. Although the 5 speed pattern used on the Subaru is used in most cars, there are other patterns. This is the reason why almost every production car has a gear knob with the pattern displayed on it. YOU may not always be the only person to drive the car, and when you smell your cooked clutch because that "new" European valet has used 2nd gear to move off every time, don't complain. Do you know the amount of gears and all patterns of every vehicle ever built?........ didn't think so. There ya go, you learn something everyday, now you know why people and manufacturers put the patterns in the vehicle

BTW, when are you removing all the wiper, A/C, radio, etc., markings. Surely by now you know where everything is don't you?

[emorphien]

Originally Posted by pioneer_sti

Uh-huh.......... bahahahahahaha ........ oh man, you can always tell the people who have limited knowledge about cars. Although the 5 speed pattern used on the Subaru is used in most cars, there are other patterns. This is the reason why almost every production car has a gear knob with the pattern displayed on it. YOU may not always be the only person to drive the car, and when you smell your cooked clutch because that "new" European valet has used 2nd gear to move off every time, don't complain. Do you know the amount of gears and all patterns of every vehicle ever built?........ didn't think so. There ya go, you learn something everyday, now you know why people and manufacturers put the patterns in the vehicle

BTW, when are you removing all the wiper, A/C, radio, etc., markings. Surely by now you know where everything is don't you?

You clearly missed the point of what I was saying. Obviously if you're going to drop it off somewhere you'd want the pattern for someone else to drive, but I don't let anyone else drive it but the dealer when necessary and they know the pattern. I myself don't need it. I know where it goes and it's not multifunctioned and it doesn't blend in like the knobs on the stereo.

And trust me I've seen plenty of different patterns so get a clue. Unless you like being an ass, posts like yours aren't adding anything.

[pioneer_sti]

Originally Posted by emorphien

Unless you like being an ass, posts like yours aren't adding anything.

And your original post was? O.K. then. My post was to back the original posters idea, and in so doing encourage the DIY community to continue to share their ideas, in spite of sarcastic remarks like yours. It also provided a reason why patterns are a good thing, what did your original post add?

[emorphien]

Originally Posted by pioneer_sti

And your original post was? O.K. then. My post was to back the original posters idea, and in so doing encourage the DIY community to continue to share their ideas, in spite of sarcastic remarks like yours. It also provided a reason why patterns are a good thing, what did your original post add?

I was agreeing with those who don't want one on their car. Other than trying to flame, what was the point of your post? Exactly.

Go find something current worth arguing about at least. Not a thread a 2 months old.

[wrxedya]

Originally Posted by emorphien

Not a thread a 2 months old.

and your doing what....

andrew

[DangBruhY]

I'm going to be checking this out in the next few days.

[wobbletop]

Here's my contribution... matches my 02 MOMO steering wheel.



And for the haters... this helps my wife since her Mini Cooper S has the reverse on the left.

[t3hWIT]

Originally Posted by Handsdown

disclaimer: this image is for artistic study only, the logo is not my own and you must have express written consent of prodrive usa to use it

naice. i want

[2002WRX_5speed]

I can now make this for anyone....email me

[2002WRX_5speed]

More sample....

[Handsdown]

finally made one that looks halfway decent:

[Jag32]

Does anyone here have a 6-speed PRODRIVE or STI pattern they could post?

Thanks

[Siper2]

Wow I forgot all about this. I have a decent printer now...

=S2=

[InfamousDX]

jsut saw this now... i love the idea.

[Handsdown]

my subaru WRT decal is still goin strong!

[arod87]

Originally Posted by colinrobinson

mine: (thanks for the idea)

damn this thing is awesome, so how much do u charge? wut do u mean pebble? i'm a slow asss mofo, lol. these things are so simple but cool. if itz not to much a prob cud u make a 6 speed STi gear pattern, w/ da little subaru symbol. and i'll probably buy, most likely...thx!

[druxboyz]

contribution

[ib2qwik2c]

These things are awesome! I'm gonna look at my interior and think harda on a design... I'll try to make a nice one myself but not sure if I have good enough software or a serious enough printer. I'm also kind of confused on the pebble stuff.
I understand that they are pretty much useless, but sooo many other mods are useless too :P These just look cool
I may change my shift knob too if I do this to a cool knob without a pattern. :P

I think most importantly, DIY is def FTW

[WickedGrip]

does anyone have one that says WRX