PAECO Cams

whtlegacy · 11-15-2003, 01:25 AM

I posted a thread a while back concerning my research on cams for the DOHC EJ25. I'm now ready to purchase a set and I've recently found PAECO. They sell 3 different grinds, each for only $420. Does anyone have any experience with PAECO. I'd really like to talk to someone who has tried their cams.
Anyway, I'm looking at the SBD-6500 "performance street" cams. They claim power is from 2400-6500 and the engine will rev to 7000.
Int: 28/62 Exh: 68/22 Duration: 270 Lift: .284"

Any thoughts before I order?

* Registered users of the site do not see these ads.

Storm · 11-17-2003, 07:09 AM

Make sure that isn't $420/cam!

The numbers look good for a decent gain....but how accurate are those numbers to what the actual grinds are?

Jay Storm
www.sourcemotorsports.com

DanzBorin · 11-17-2003, 10:21 AM

nobody has ever been able to dig up info on them iirc... try calling and seeing... I think people couldn't even get them on the phone in the past...

whtlegacy · 11-17-2003, 12:29 PM

Well I just got an email response from PAECO and found that the price is indeed $840 for my DOHC. So much for PAECO...

11-15-2003, 01:25 AM	#1
whtlegacy Scooby Specialist Member#: 38400 Join Date: Jun 2003 Chapter/Region: MWSOC Location: Cleveland Vehicle: 2004 WRX Wagon DRZ400SM	PAECO Cams I posted a thread a while back concerning my research on cams for the DOHC EJ25. I'm now ready to purchase a set and I've recently found PAECO. They sell 3 different grinds, each for only $420. Does anyone have any experience with PAECO. I'd really like to talk to someone who has tried their cams. Anyway, I'm looking at the SBD-6500 "performance street" cams. They claim power is from 2400-6500 and the engine will rev to 7000. Int: 28/62 Exh: 68/22 Duration: 270 Lift: .284" Any thoughts before I order? * Registered users of the site do not see these ads.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Paeco Cams?	Imprezafan1	Normally Aspirated Powertrain	15	06-19-2002 11:16 AM
PAECO catalog - scanned cams & heads pages	monovich	Normally Aspirated Powertrain	41	02-11-2002 11:22 AM
Paeco NA Engines	mav1c	Normally Aspirated Powertrain	7	12-10-2000 10:40 AM
Paeco, Stage 2	Soon2Bgreat	General Forum Archive	6	10-09-2000 04:52 AM
Do you trust Paeco?	Max Umbarger	Technical Forum Archive	0	09-12-2000 02:22 PM

11-17-2003, 07:09 AM	#2
Storm Scooby Guru Member#: 5218 Join Date: Mar 2001 Chapter/Region: MWSOC Location: SAUL'S Motorsports Vehicle: 96L Most Over- Developed Beater	Make sure that isn't $420/cam! The numbers look good for a decent gain....but how accurate are those numbers to what the actual grinds are? Jay Storm www.sourcemotorsports.com

11-17-2003, 10:21 AM	#3
DanzBorin Subaru Bounty Hunter Moderator Member#: 7131 Join Date: Jun 2001 Chapter/Region: TXIC Location: Houston - Back in the Alief Vehicle: 2008 STi DGM (3rd STI) prev 05 STi (white)	nobody has ever been able to dig up info on them iirc... try calling and seeing... I think people couldn't even get them on the phone in the past...

11-17-2003, 12:29 PM	#4
whtlegacy Scooby Specialist Member#: 38400 Join Date: Jun 2003 Chapter/Region: MWSOC Location: Cleveland Vehicle: 2004 WRX Wagon DRZ400SM	Well I just got an email response from PAECO and found that the price is indeed $840 for my DOHC. So much for PAECO...