Ludespeed install questions

blaznc · 06-26-2004, 10:13 PM

Stage III

Where do I get all the vaccum lines for the BOV, wastegate, Link computer, and boost gauge?

Probably more to come later;(

* Registered users of the site do not see these ads.

munkis · 06-26-2004, 10:17 PM

im guessing coolant feed and return without even looking at it.

oil cooler goes where ever you want it too.

catch can mounts where every you want it to?

Ive never seen install instructions, so I dont know if the kit includes instructions or where to mount the stuff.

Jay

blaznc · 06-26-2004, 10:20 PM

By where does it go I mean what lines to plug into it.

munkis · 06-26-2004, 11:08 PM

Did it inlude adapters for the oil filter housing? (oil cooler)

the coolant feed and return I think tap into a heatercore hose.

you will need an oil feed and oil return line, oil return will probably go to the cooler, feed will come off the back of one of the heads or available oil gally's, then the other cooler line will go back to the pan...

the catch can is for the 3 pcv hoses. How many fittings on the catch can?

Jay

Hitokiri · 06-26-2004, 11:42 PM

here you go:

http://www.ludespeed.com/rsinstall.doc

Drac9 · 06-27-2004, 01:53 AM

You can get vacuum reference of the fuel pressure regulator vacuum line. Just t off of that.

06-26-2004, 10:13 PM	#1
blaznc Scooby Newbie Member#: 41862 Join Date: Aug 2003 Chapter/Region: BAIC Location: Sunnyvale, CA Vehicle: 0000 99L 2.2T, dead 93 Wagon 1.8L of fury!!	Ludespeed install questions Stage III Where do I get all the vaccum lines for the BOV, wastegate, Link computer, and boost gauge? Probably more to come later;( * Registered users of the site do not see these ads. Last edited by blaznc; 06-27-2004 at 01:07 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
quick alk install question-what direction should the big washer be installed?	garie	Brakes, Steering & Suspension	5	07-07-2005 04:48 AM
Ludespeed specific questions	ilmaestro	Normally Aspirated with bolt-on Forced Induction Powertrain	4	04-15-2004 09:06 PM
ludespeed install	monies41	Mid West Subaru Owners Club Forum -- MWSOC	2	10-07-2003 09:54 AM
DMS Questions & Install Questions...	wrx182	Brakes, Steering & Suspension	3	01-06-2002 09:55 PM
Install question....	T-WReX 2.5RS	Mid West Subaru Owners Club Forum -- MWSOC	1	05-08-2001 10:35 PM

06-26-2004, 10:17 PM	#2
munkis Scooby Guru Member#: 1847 Join Date: Jul 2000 Chapter/Region: Tri-State Location: brokenmotorsports.com Vehicle: Team Broken: V6 GF rallyarmor.com	im guessing coolant feed and return without even looking at it. oil cooler goes where ever you want it too. catch can mounts where every you want it to? Ive never seen install instructions, so I dont know if the kit includes instructions or where to mount the stuff. Jay

06-26-2004, 10:20 PM	#3
blaznc Scooby Newbie Member#: 41862 Join Date: Aug 2003 Chapter/Region: BAIC Location: Sunnyvale, CA Vehicle: 0000 99L 2.2T, dead 93 Wagon 1.8L of fury!!	By where does it go I mean what lines to plug into it.

06-26-2004, 11:08 PM	#4
munkis Scooby Guru Member#: 1847 Join Date: Jul 2000 Chapter/Region: Tri-State Location: brokenmotorsports.com Vehicle: Team Broken: V6 GF rallyarmor.com	Did it inlude adapters for the oil filter housing? (oil cooler) the coolant feed and return I think tap into a heatercore hose. you will need an oil feed and oil return line, oil return will probably go to the cooler, feed will come off the back of one of the heads or available oil gally's, then the other cooler line will go back to the pan... the catch can is for the 3 pcv hoses. How many fittings on the catch can? Jay

06-26-2004, 11:42 PM	#5
Hitokiri Scooby Specialist Member#: 2604 Join Date: Oct 2000 Chapter/Region: NESIC Location: CA Vehicle: 1999 2.5RSt RBP	here you go: http://www.ludespeed.com/rsinstall.doc

06-27-2004, 01:53 AM	#6
Drac9 Scooby Specialist Member#: 9861 Join Date: Sep 2001 Chapter/Region: RMIC Location: Colorado Springs, CO Vehicle: 1999 2.35 RS-T w/NOS Hybrid Rally Blue Pearl	You can get vacuum reference of the fuel pressure regulator vacuum line. Just t off of that.