1=MAF attached to air filter. I cut out the fender well to JAMB this into place. I still need to get a real MAF to air filter connector.
2=Two part custom welded intake for the supercharger. I took the original intake, cut off the top, and welded some other part (the black thing) to the top of it. I dont know where the black thing came from other than I won it as a piece of the supercharger action. I suspect it was part of the throttle body intake. Cost $40 for both parts)
3=Custom braket cut out of 3/8" steel Cost $60
4=Original crank. Too small. Needs to be about 8" in diameter. Hope to custom fab one this week for about $100.
5=Custom intake. Had made at my muffler shop for $75.
6=Nitrous Solenoid. You can follow the line above it to see it enter the intake right above #5 arrow.