Prodrive '04 WRX Springs and Revlab Quickracks

[Aerosim Research Ltd]

We have several sets of Prodrive '04 WRX springs in stock ... $299.00 w/free shipping

We also have one Revlab quick rack (12.5:1 ratio) for a GC8 and one for a WRX ... $1200.00 w/free shipping.

Note, the racks are sold on an exchange basis. Either ship us your rack (must be undamagaed) and we'll ship you the quick rack, or you can send a refundable core charge of $675.00 which will be returned once your undamaged rack is received.

Thanks,
Steve

Stephen.Ramm@aerosim-research.com

* Registered users of the site do not see these ads.

[SinhCredible]

so its 1200+675?

[wntobp1]

I was wondering if you guys have any of the prodrive springs availble for a 2004 wagon?

[Aerosim Research Ltd]

Originally Posted by asnrefugee

so its 1200+675?

Yep, and you get the $675.00 back when we get your rack as long as it's not bent or anything.

-Steve

Stephen.Ramm@aerosim-research.com

[Aerosim Research Ltd]

Originally Posted by wntobp1

I was wondering if you guys have any of the prodrive springs availble for a 2004 wagon?

Yes, we have quite a few sets of '04 Prodrive springs in stock. It's kind of hard to reach me via phone because I'm the only one in the shop, but if you want you can e-mail your shipping info and your phone # and I'll call you for your payment info.

Thanks,
-Steve

Stephen.Ramm@aerosim-research.com

[engineerx]

Do you place orders for Rev-Lab qracks?
I'm thinking about getting one for my STi
What is the total price?
I have a STi core I bought from dismantler so I can bring that in
I need to know what the Rev-Lab price is including all shipment
thanks

[FLEMON]

I NEED a shorter rack since we do road racing...
Can you get a shorter one than the 12:5:1..? I was thinking about the 11.5:1 or something like that...how much for these?

Do you guys do rebuilds? Ex. I send you mine and yo turn it into a (12:5:1)..?

IM REALLY INTERESTED.

[Aerosim Research Ltd]

Originally Posted by engineerx

Do you place orders for Rev-Lab qracks?
I'm thinking about getting one for my STi
What is the total price?
I have a STi core I bought from dismantler so I can bring that in
I need to know what the Rev-Lab price is including all shipment
thanks

Yes we do. It's usually around 3 weeks turn around if we send your rack out to be rebuilt. I've been trying to keep a couple in stock to avoid the delay, but if you want I can send yours out. The price is $1200, all shipping is included.

Originally Posted by FLEMONI

NEED a shorter rack since we do road racing...
Can you get a shorter one than the 12:5:1..? I was thinking about the 11.5:1 or something like that...how much for these?

Do you guys do rebuilds? Ex. I send you mine and yo turn it into a (12:5:1)..?

IM REALLY INTERESTED

Same price for the 11.5:1 as the 12.5:1. We send them out to be rebuilt (new rack and pinion and all new seals, etc), but we're trying to keep some in stock to avoid delays.

-Steve

Stephen.Ramm@aerosim-research.com

[FLEMON]

So when can you have available a 11:5:1 rack...?
Its $1,200 how much shipped to P.R 00966..?
You think that this could be available before the 22nd..?

[Aerosim Research Ltd]

Originally Posted by FLEMON

So when can you have available a 11:5:1 rack...?
Its $1,200 how much shipped to P.R 00966..?
You think that this could be available before the 22nd..?

Unfortunately it's at least 3 weeks to get the rack and another 4-5 days to get it to you, so it's impossible to get it by the 22nd.

-Steve

Stephen.Ramm@aerosim-research.com

[FLEMON]

How about if we purchase the 12:5:1 (since were kind uf desperate) and then we send it to convert it into a 11.5.1 is this possible.?
How much would the rebuild be..?

The 12:5:1 IS available right..?
Shipped to San Juan Puerto Rico 00966...how much..?

[RC0310]

Interested in Prodrive springs.

How much shipped over the border to Vancouver, B.C, Canada? and how long?

Please state price (with shipping) in both USD and CDN if possible. Thanks.

[Aerosim Research Ltd]

Originally Posted by RC0310

Interested in Prodrive springs.

How much shipped over the border to Vancouver, B.C, Canada? and how long?

Please state price (with shipping) in both USD and CDN if possible. Thanks.

PM'ed you with pricing, etc.

-Steve

Stephen.Ramm@aerosim-research.com

[Aerosim Research Ltd]

Originally Posted by FLEMON

How about if we purchase the 12:5:1 (since were kind uf desperate) and then we send it to convert it into a 11.5.1 is this possible.?
How much would the rebuild be..?

The 12:5:1 IS available right..?
Shipped to San Juan Puerto Rico 00966...how much..?

It really wouldn't be worth it as it costs the same to convert the 12.5:1 rack into an 11.5:1 rack as it does to convert a stock rack so you'll end up paying twice.

Total for the 12.5:1 rack (yes, it's in stock) is $1925. After we get your stock rack in rebuildable condition, we'll return the $675 core charge. Since you're outside of the US, we require a wire transfer to our corporate bank account.

Thanks,
-Steve

[gone2vegas]

Steve,

How much would you charge to install the springs on an 04 WRX Wagon?

[Aerosim Research Ltd]

Originally Posted by gone2vegas

Steve,

How much would you charge to install the springs on an 04 WRX Wagon?

It's $150 if you buy them from us and $200 if you bring them.

Thanks,
-Steve

Stephen.Ramm@aerosim-research.com

[ckc]

Hey Steve,

Do you have any prodrive springs for '02 WRX's? And how much if I just come by and pick them up? Got any '02 access ports in stock too?

Thanks,

Chris

[Aerosim Research Ltd]

Originally Posted by ckc

Hey Steve,

Do you have any prodrive springs for '02 WRX's? And how much if I just come by and pick them up? Got any '02 access ports in stock too?

Thanks,

Chris

Hey Chris,

Sorry I didn't reply sooner to this thread ... I can't get to your post unless I follow the tree thing ... weird.

Anyway, I can get you springs if you want. $299 tax included if you pick them up. I can get you an access port as well if you want.

-Steve

Stephen.Ramm@aerosim-research.com

[subaru_wrxwagon]

Are they specific 04 wagon springs? Do prodrive make springs for 04 wagon yet? how would they compare to the sti pink wagon springs?

[Aerosim Research Ltd]

Originally Posted by subaru_wrxwagon

Are they specific 04 wagon springs? Do prodrive make springs for 04 wagon yet? how would they compare to the sti pink wagon springs?

Nope, Prodrive never makes a specific wagon spring, they just make one for the sedan and wagon. In fact, the Subaru factory springs are the same except in the rear. In the rear, the left sedan spring is the same as the right wagon spring but there are different part numbers for the right sedan spring and the left wagon spring. Go figure. The fronts are the same.

They're a little softer than the pinks but work better with the stock struts than the pinks do.

-Steve

Stephen.Ramm@aerosim-research.com

[Sir_Xenon]

How many people would it take to lower the price of an 11.5:1 rack to below $900? The cost is prohibitive for many and I believe a group buy would work here. I'm willing to bet my right arm that you can sell 50 racks if you could sell it for under $900.

[spool]

ditto on the $900 11:5:1 group buy!!!!!

[Aerosim Research Ltd]

I'd have a huge problem doing a $900 group buy for the racks. RevLab sets the price and I follow their wishes. I could probably knock off $100 or $150 if I got enough people interested. Right now I'm doing install, whiteline bushings and an alignment for $1300 for local So Cal customers to try to offset the cost of the racks. I know that doesn't help anyone outside the area, unless you up for a road trip.

I'll talk to the guys at RevLab and see what I can do about a group buy.

Thanks,
Steve

[BAC5.2]

Would they be able to work the rack from a 94 Legacy Turbo?

It's not the same as the GC rack or the GD rack. I would be willing to donate mine as a test for a dropped price

[Sir_Xenon]

BAC5.2, you should contact RevLab directly and allow Steve to work on the group buy for us!

Seriously, this group buy should be possible; I've been to the shop where they make it, if they get an order for 50, and have all the racks ready, they can hammer it out and use the CNC machine more effeciently.

Any word back from ReVLab, Steve?