Container Landed! V7 STI, V7 STi and Spec C

[Kingpin]

Contact me via Email at Clark@kingpinperformance.com or call the shop at 602-795-3036 if you know what parts you are after.

We have an 04 US STI instock for part out. Drivetrain sold. Lots of other good parts including interior. Call for parts you need. Also have one V7 STI arriving this week. Prepay for parts you need. March 23rd.





Super Sale on instock items that are taking up space. Can ship right away.

2 X STI Utecs. Brand new in the box. For US STI 04 and 05. $989 each

1 X WRX Utec Brand new in the box. For WRX. $989

Perrin Turbo inlet pipe. Brand new $179.

2 X Perrin WRX rails. Fits 02-04 WRX or 01-05 JDM motors. $340 each

2 X Agency power Sway bar end links. Replace those mild steel or plastic end links. One front sent, one rear set. Fits WRX

and STI. $105 each or $200 for both

1 set of Noltec front sway bar links Front. Fits WRX and STI. $99.

Blue STI front grille. Off JDM Car. Good shape $75

Greddy Oil catch can $85.00

STI fuel rail:



Walbro 255LPH pumps $86 each and ready to ship.



Perrin Fuel rails. Tons in stock. Ready to ship. We have a stock of WRX in black and silver for STI versions. Same price for

both.

$350 shipped


Recently we have had an influx of cars getting our GT35R kit that are already modified. Those parts are being sold off. Here are the list of parts from those two cars.

Car 1: (code A)

(all parts in this category have less than 2000 miles on them)

-FP Green turbo (internal wastegate) Turbo has less than 2000 miles and was just rebuilt by forced performance. It has not been used since. $1250
- jet hot coated up pipe $170
-APS divorced exhaust downpipe (from turbo to cat delete pipe) $275
-3" APS cat delete pipe $100
-3" APS down pipe $275
-Intercooler piping from APS DR725 front mount kit $200
-APS BOV for FMIC use $100
-AVO silicone intake pipe $100
-S.E.C.S. in dash monitoring system $350

Car 2 (Code A)

FACTORY PARTS '04 US STI (all have less than 5000 miles on them)

-Rods $350
-Pistons $200
-Valves $250
-Springs $100
-Exhaust manifold $100
-Up pipe $175 Catless
-Down pipe $75
-Exhaust (cat back) $150
-AVCS cam gears $75 each
-Clutch and pressure plate for 6mt $350
-All engine mounts $150 for all
-All intake parts including manifold $400

Car 3 (Code DE)

First Gen APS FMIC with Silcone tubes Polished tanks $600
DR55 Turbo setup. 3 months old. 3000 miles. Internaly gated. Complete kit $4495 new. $2799 complete.
3.5 inch APS Exhuast turbo back FULL system. Fits Stock location turbos. $550
PE650 injectors $400
TurboXS unichip. STG1 map $200 Fits 02-03 WRX's
APS tumbler delete setup. Brand new $299
APS Aux fuel rail to match Tumbler delete kit $225
APS Fuel rails For standard manifold or APS Tumbler deletes $350
Blitz exhaust Catback Nurspec Used for 20 minutes. To loud.. Pulled off car $350
SS downpipe Widemouth Not sure on make of this pipe. Looks like Helix. Nice quality. $225
APS BOV for FMIC $100
Blitz Cone air intake kit. Mounted. never driven, Hood would not close with APS system. $150

Car 4 (code JA)
Nismo 720CC injectors. Fits 04/05 STI $350
APS Cold air intake $150
SR55 turbo $1500
APS Upipe $150
APS 3.5 inch downpipe $300


Used Or JDM parts:



WRX Front rotors. Good shape. 3 pairs. $75 a pair

WRX Front calipers Good shape. 3 pairs. $100 a pair

WRX Rear rotors. Good shape. 2 pair. $75 a pair

WRX Rear Calipers. Good shape. 2 pair. $100 pair

1 box of Hawk brake pads new. HB237F.625 part number. Have no Idea what these fit. $50

Stainless brake lines Front WRX new in box. $70

Stainless brake lines all four used $100

V7 STI black springs. $75 a set. 2 Pair

04 WRX struts. 3k miles. $200.

04 Eibach springs. 3k miles. $100

APS 2.5 inch axle back $150

APS 3 inch axle back $175

STock Forester XT turbo Springs and struts $200

White line race springs. 2.5 inch slam $100

1 set of WRX stock struts. Used 10k miles $150

6 RH side aluminum STI A arms. NO left sides instock $75 each

STI Titanium Strut bar. Real deal. Fuji aerospace TI bar. Fits WRX and STI. $225

2 cross member braces. Came on STI in Japan. US cars do not have these. $75 each

STI Stock Sideskirts. WRB in color. Need paint $100

Power folding STI side mirrors. Make your car wave to the crowd. factory on the JDM STI. 4 sets instock all WRB in color.

$225 a set

1 stock RH side mirror black in color. $70

US WRX headlights. 2 right hand sides only. $40 each

JDM STI headlight. 1 right hand side only. $100

Tail lights. 02-03 WRX. Four pairs. $100 a pair.

APR Carbon mirrors. Used on my car. Perfect shape. Black sides with carbon mirror. $100 a set

Factory STI Roof scoop. WRC style. Needs slight repair and paint. Slight crack under side. $50

Auto meter black face water temp gauge $35

Recaro Seat rails for WRX. $75 a set.

Stearing wheels:

1 US STI wheel. No airbags $175

1 V limited STI wheel. Wood grain top and bottom. Black wood color. No airbag. $175

JDM Sun visors. Light weight. No mirrors, JDM warning stickers. $35 a pair. 1 good, 1 decent shape.

JDM Business card holder 2 sets. $40 each

v7 Red stiched E brake handle. $75 (entire assembly)

JDM Orange Road Flares with mounting brackets. 4 instock. $25 each

4 Rear US WRX Axles. $75 each

Rear US WRX hubs. 4 instock $65 each.

V7 Alternator (higher amp) $75. Marked AA420. US cars should have AA430 which is lower amp.

JDM STI RA wheels. Steelies. Fits over the STI brakes but not brembos. Came factory on the Type RA spec C. $400

STI Rear seat. No pass through. Blue and black. Matches door panels. Lighter then US Seat. $200

APS Blow off valve. For use with FMIC. $100

Pivot boost gauge 60mm. Blue face with Yellow Letters. This is a JDM gauge that came in a type RA from japan. It comes with

mounting cup and stand. The gauge is mechanical and is lighted. $45

Picture of pivot boost gauge


More products uploaded all the time. Check back. If you have questions, post, PM, email or Call me at the shop. 602-795-3036.

Advice is always free. Glad to help.

Clark

Kingpin Performance

* Registered users of the site do not see these ads.

[stratos]

Clark,
sent you an email about a fender.

[AZScoobie]

Replied to email.

C

[ElJefe]

any 6 speeds?

[BrianH]

Originally Posted by ElJefe

any 6 speeds?

I'm in on this question too.

[Graham]

Yup, 6 speeds....what is the mileage and do you have any prices yet? Would need tranny and rear differential (R180) as well.


Graham

[mantra1]

Originally Posted by ElJefe

any 6 speeds?

Count me in on this as well. I need a tranny.

[DRIVER1]

and me

[Kingpin]

I believe all the 6 speeds are spoken for already. Next container is arriving with several complete drivtrains. If you would like to get on the list please let us know. Thanks.

M

[mantra1]

Originally Posted by Kingpin

I believe all the 6 speeds are spoken for already. Next container is arriving with several complete drivtrains. If you would like to get on the list please let us know. Thanks.

M

Put me on the list please.

[ebeck]

Got in months ago for a 6 speed. Arrives tuesday. Finally, I can will be able to run 22# on my car! Thanks KingPin for coming through. Pre-order fellas. Pre-order.

[Kingpin]

Pre-Order is really a good idea guys. These engines and trannies are in and out of the shop in one day. As noted we have a container coming with several complete drivetrains. Some are already spoken for. If you would like to get on the least please let us know. We are taking deposits to hold position for serious customers. Thank you.

[GTScoob]

How much do you think a non-DCCD six speed will run for in that next shipment?

What all is included (clutch/flywheel/pressure plate/shifter)?

[vermonturbo]

will you be opoen friday or are u stuffed from too much turkey? i will be in scottsdale for another day and would like to come down to salivate over the cars n'shtuff

[Kingpin]

As it turns out we have the RA Tranny and some other goodies available. Tranny is DCCD with controller and tranny cooler. Cost is $3950. A steal with all that included!!! Other items updated at top. Thanks.

M

[GTScoob]

how many miles on that transmission and is clutch, flywheel, and pressure plate included?

[Kingpin]

Tranny has 7-8k miles on it. CAn do it with clutch, flywheel and pressure plate. Thanks.

[jigga]

Just a non-related question.... but what are the specs on the rims on the white impreza at the top of the page(the ordinary-lookin rims)?? And also, do they fit over the STi Brembo caliper setup??

[Joker 13]

What can you do v8 ecu for?

[Kingpin]

Jigga-Rims on Spec C are the steel wheels and have sold. Sorry.

JoKeR 13- ECu goes for $500. Thanks.

M

[jigga]

Originally Posted by Kingpin

Jigga-Rims on Spec C are the steel wheels and have sold. Sorry.


M

Thanks Mike..

I wasn't really lookin to buy the rims, as I already have a set as winter wheels on my car that I bought from Subaru here.... but what they tell me here though is that there is no way that the Brembo rotor and caliper setup of the STi would fit behind those rims 16inch rims... Is that true??

I was under the impression that the Spec C's came with the 16 inch steel rims AND Brembos as standard... Just hoping that you can provide some clarification to this..I am considering purchasing some Take-off Brembos from the USDM or JDM STi, but need to know if they would fit behind my winter rims (which look identical to the ones on the Spec C you have there).

Thanks

[supermarkus]

I think you can get the Spec C in a 16" wheel version aimed at gravel spec builds and a 17" version.

[jigga]

Originally Posted by supermarkus

I think you can get the Spec C in a 16" wheel version aimed at gravel spec builds and a 17" version.

ahhh thanks... But any idea if the brembos came with the gravel spec version with the 16 inch rims???

EDIT: Ahh..found the answer.... there were in fact 16 and 17 inch versions of the spec C. The 17 inch rims housed Brembos, while the 16 inch versions housed the Subaru 4 pots....

[Kingpin]

You can have a 16" rim clear. I believe the STi sare is a 16" and clears the brembos. I can check for you tomarrow when i get in. Thanks.

M

[WickedSTI]

att Clark i hope the ra wheels you sent will fit usdm 04 sti.If there is a prob call me asap.Brad