How to install a Hayden 1403 ?

nor1212 · 07-02-2001, 11:47 PM

Hello, the Hayden 1403 is an automatic transmission cooling kit that i bought for my 1998 Legacy 2.5GT. Now the transmission shop wants to charge me $60 to install it. Should i let them install it or should i save the $60 and install it myself. I know there is somebody(RIFTSWRX) who has an information page on installing the 1403, but it was for a WRX and i think there is a lot of difference between the GT and WRX engine compartment. Has anybody installed such an item on a legacy GT?
Thanks a lot
later..

* Registered users of the site do not see these ads.

nor1212 · 07-03-2001, 08:46 PM

hello nor1212,
this is nor1212 telling you how to install a Hayden 1403.
1) Choose a hose from the engine compartment.
2) Remove all clamps from it.
3) Mount the tranny cooler
4) Stick the hose into the tranny cooler.
5) Take another hose and stick it back to where
you unplugged the first hose from.
Its so simple. You be a dummy if you spend US$60=S$108 to pay someone to do this.

silverSurfer · 07-04-2001, 02:12 AM

right....anything else you'd like to tell urself???

07-02-2001, 11:47 PM	#1
nor1212 Scooby Newbie Member#: 1991 Join Date: Jul 2000 Location: Singapore Vehicle: nil nil nil	How to install a Hayden 1403 ? Hello, the Hayden 1403 is an automatic transmission cooling kit that i bought for my 1998 Legacy 2.5GT. Now the transmission shop wants to charge me $60 to install it. Should i let them install it or should i save the $60 and install it myself. I know there is somebody(RIFTSWRX) who has an information page on installing the 1403, but it was for a WRX and i think there is a lot of difference between the GT and WRX engine compartment. Has anybody installed such an item on a legacy GT? Thanks a lot later.. * Registered users of the site do not see these ads.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-03-2001, 08:46 PM	#2
nor1212 Scooby Newbie Member#: 1991 Join Date: Jul 2000 Location: Singapore Vehicle: nil nil nil	hello nor1212, this is nor1212 telling you how to install a Hayden 1403. 1) Choose a hose from the engine compartment. 2) Remove all clamps from it. 3) Mount the tranny cooler 4) Stick the hose into the tranny cooler. 5) Take another hose and stick it back to where you unplugged the first hose from. Its so simple. You be a dummy if you spend US$60=S$108 to pay someone to do this.

07-04-2001, 02:12 AM	#3
silverSurfer Scooby Specialist Member#: 1361 Join Date: Apr 2000 Chapter/Region: Tri-State Location: Used to be Long Island/NYC... Vehicle: 1999 Legacy GT Ltd. 2006 Rav4 Sport Silvarrr	right....anything else you'd like to tell urself???