Sorry to cross post. I have a MY95 Impreza L with an EJ257 swap. I have a JDM GC8 front crossmember and I just added 2006 STI aluminum control arms with with MY 2006 STI transmission swap axles and hubs. I swapped the front bushings to Super Pro for a GC* and the arms bolt up no problem. The problem I'm having is I can't get the front sway bar to connect. I have the SuperPro Roll Center & Bump Steer Correction Kit and coil overs. I am trying to install a 24mm Whiteline front bar and it hits on the control arms and it is like the bar mounts to the crossmember to far back. Does the GD bushings mount further forward? Do I need a GD crossmember? I've done a lot of searching without success.