sti utec map..

CBRDSpeedfactory · 01-28-2005, 07:45 PM

im looking for someone to try this map..

it is dyno tuned and street massaged...

i am playing with a few different things...

its for

stock turbo, intake, downpipe, catless, 3" exhaust...

im running an mbc, but u can use your ebc.. .just set it to 1.35 bar low/mid range, and taper to 1 bar redline...

email me at chad@chadblock.com

its an 11.0 afr on our car. and we made +42whp and +62 wheel torque on a mustang with it....and that was before i retuned it for the exhaust and downpipe...

im expecting close to a 60whp and 80 ft lb gain

thanks

chad b

* Registered users of the site do not see these ads.

happasaiyan · 01-28-2005, 09:55 PM

octane, elevation?

how close to the edge is your map?

might not be too good to distribute that map, FYI. if others have problems with it, they might come for you. just attach a disclaimer.

CBRDSpeedfactory · 01-29-2005, 01:30 AM

dont worry, covered that in the emails, im not selling...so its up to the user...

its not exactly aggressive.....

we are just playing with a few things...i have a few very satisfied people running our maps already...

this one is a little different...

i appreciate the feedback...

uh o.h.... we are close to dropping in a mustang!

cb

04STiguy · 01-29-2005, 01:35 AM

I'll give it a whirl.....

kool168 · 01-30-2005, 03:45 PM

Quote:

Originally Posted by 04STiguy

I'll give it a whirl.....

i will try that

CBRDSpeedfactory · 01-30-2005, 09:03 PM

email me guys...

and i will get it to you..

you will have to play with the boost settings as we are tuning with ebc and mbc... but it is a safe map for the stock ebc, with up to 1.35 bar, tapering to 1 bar...

AFR is 11.0 so its still plenty rich, of course each car is different...but tell me what u think.

chad b

when i get ur email ill attache the program

cb

EdsWRX · 02-22-2005, 12:42 PM

emailed you for the map. Will let you know what kind of numbers we get.

SloRice · 02-22-2005, 02:05 PM

Quote:

Originally Posted by CBRD

uh o.h.... we are close to dropping in a mustang!

um

I think we need to talk first

hippy · 02-22-2005, 02:07 PM

Is that a stock intake and downpipe? If not, what kind? Not that I have an sti....

peace

CBRDSpeedfactory · 02-22-2005, 03:49 PM

we just did 298 whp on a mustang with 93 octane...

1.4 bar tapering down to 1.0 bar...

11.0 afr...

with kn intake, perrin downpipe, greddy cat back, fuel pump and my intercooler...

this was with 19" wheels and 355mm brakes also...

chad b

kool168 · 02-28-2005, 06:20 AM

Quote:

Originally Posted by CBRD

we just did 298 whp on a mustang with 93 octane...

1.4 bar tapering down to 1.0 bar...

11.0 afr...

with kn intake, perrin downpipe, greddy cat back, fuel pump and my intercooler...

this was with 19" wheels and 355mm brakes also...

chad b

is it K&N typhoon?
and wut kinda fuel pump and intercooler

did you port the WG?

2phless · 02-28-2005, 07:36 PM

You PMs are full but I'd like to comapre your maps to mine.

01-28-2005, 07:45 PM	#1
CBRDSpeedfactory Vendor Member#: 68255 Join Date: Aug 2004 Chapter/Region: MAIC Location: Pennsylvania Vehicle: ALL lots of fast 1s mostly silver!	sti utec map.. im looking for someone to try this map.. it is dyno tuned and street massaged... i am playing with a few different things... its for stock turbo, intake, downpipe, catless, 3" exhaust... im running an mbc, but u can use your ebc.. .just set it to 1.35 bar low/mid range, and taper to 1 bar redline... email me at chad@chadblock.com its an 11.0 afr on our car. and we made +42whp and +62 wheel torque on a mustang with it....and that was before i retuned it for the exhaust and downpipe... im expecting close to a 60whp and 80 ft lb gain thanks chad b * Registered users of the site do not see these ads.

01-29-2005, 01:30 AM	#3
CBRDSpeedfactory Vendor Member#: 68255 Join Date: Aug 2004 Chapter/Region: MAIC Location: Pennsylvania Vehicle: ALL lots of fast 1s mostly silver!	lol... dont worry, covered that in the emails, im not selling...so its up to the user... its not exactly aggressive..... we are just playing with a few things...i have a few very satisfied people running our maps already... this one is a little different... i appreciate the feedback... uh o.h.... we are close to dropping in a mustang! cb

01-30-2005, 09:03 PM	#6
CBRDSpeedfactory Vendor Member#: 68255 Join Date: Aug 2004 Chapter/Region: MAIC Location: Pennsylvania Vehicle: ALL lots of fast 1s mostly silver!	ok.. email me guys... and i will get it to you.. you will have to play with the boost settings as we are tuning with ebc and mbc... but it is a safe map for the stock ebc, with up to 1.35 bar, tapering to 1 bar... AFR is 11.0 so its still plenty rich, of course each car is different...but tell me what u think. chad b when i get ur email ill attache the program cb

02-22-2005, 03:49 PM	#10
CBRDSpeedfactory Vendor Member#: 68255 Join Date: Aug 2004 Chapter/Region: MAIC Location: Pennsylvania Vehicle: ALL lots of fast 1s mostly silver!	hippy we just did 298 whp on a mustang with 93 octane... 1.4 bar tapering down to 1.0 bar... 11.0 afr... with kn intake, perrin downpipe, greddy cat back, fuel pump and my intercooler... this was with 19" wheels and 355mm brakes also... chad b

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-28-2005, 09:55 PM	#2
happasaiyan Scooby Specialist Member#: 37731 Join Date: Jun 2003 Chapter/Region: MWSOC Location: Rolling Meadows, IL Vehicle: '07 TL-S 6MT '07 RDX-T	octane, elevation? how close to the edge is your map? might not be too good to distribute that map, FYI. if others have problems with it, they might come for you. just attach a disclaimer.

01-29-2005, 01:35 AM	#4
04STiguy Scooby Specialist Member#: 36234 Join Date: May 2003 Chapter/Region: SCIC Vehicle: 2005 WRX STi CGM	I'll give it a whirl.....

02-22-2005, 12:42 PM	#7
EdsWRX Scooby Specialist Member#: 13881 Join Date: Jan 2002 Chapter/Region: MAIC Location: Pittsburgh/West Lafayette Vehicle: 08 spec b 07 335xi	emailed you for the map. Will let you know what kind of numbers we get.

02-22-2005, 02:07 PM	#9
hippy Scooby Specialist Member#: 36528 Join Date: May 2003 Location: florida Vehicle: 2002 Impreza Wrx Silver	Is that a stock intake and downpipe? If not, what kind? Not that I have an sti.... peace

02-28-2005, 07:36 PM	#12
2phless Scooby Specialist Member#: 69343 Join Date: Aug 2004 Chapter/Region: South East Location: 'tween Lewisville&Clemmons NC Vehicle: 2000 nothing good slow	You PMs are full but I'd like to comapre your maps to mine.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CA: STi Utec + Map Selector	dashiet	Private 'For Sale' Classifieds	3	09-08-2004 01:55 PM
Need STi Utec Map	wrxyboy	Engine Management & Tuning	4	07-03-2004 08:44 AM
Rich STI UTEC map #1	cpturbo	Engine Management & Tuning	15	05-23-2004 09:51 PM
Sti Utec Map	wrxyboy	Engine Management & Tuning	12	05-18-2004 04:27 PM
STI UTEC Maps???	Abe Froman	Engine Management & Tuning	0	04-22-2004 09:10 AM