Yes! Getting a custom turbo setup in Orlando for 2.5 RS

Imprezha · 07-15-2001, 04:41 PM

Im getting a custom turbo built in Orlando. which turbo,gauges,and fuel regulators or whatever the fuel parts they are should I use for the impreza 2.5 RS. Im getting all the piping done custom in stainless steel.

Help would be appreciated.

* Registered users of the site do not see these ads.

STiTuner · 07-15-2001, 06:51 PM

Hey who in orlando is doing yoru setup? I went to Velocity resources but they wanted a crap load of money. more then any other kit woulda cost me. infact I coulda fedex'd my car to rallispec to have them do it for cheaper

Anyway I went with a vortec S-FMU cost about 300 but its completly adjustable for idle vacum and boost. GET a Fuel pressure gauge though deffinatly if you're going to tune that way. and depending on what kinda of boost you plan on running I'ld get larger injectors and a fuel pump are necessary I'm going to run mine stock for the first few weeks before I turn up the boost and add RC's

Please PM me on the details of your kit we might be able to collaborate a bit on this together. I'm in orlando as well and I got a subie techinican from a certain dealer (I'll width hold the name of it for now) helping me with the install

Good Luck
Brad

8Complex · 07-15-2001, 07:38 PM

Isn't Deltona near Orlando? Ludespeed is located right there... give him a shout - <a href="mailto:ludicrous2_0@yahoo.com">ludicrous2_0@ yahoo.com</a>

cdigerlando · 07-15-2001, 09:27 PM

I took my SVX to Lugo performance. I already turbocharged it with a kit I got from forced air technologies. They also sell RS kits. I am having them do engine managment for me (tech II). I live in Longwood. Finding someone willing to work on a subaru was difficult. I also own a WRX. Write me.

jdm · 07-15-2001, 10:54 PM

Yeah I'm in the Orlando area too. I'm looking for a performance shop familiar with Subarus. Just ordered the PE 1818 from Dan and I'm seriously considering going TECII. I also need advice on whether forged rods and pistons would be needed with a power output of around 350-400hp. At this point nothing's definite.

Bobalouy · 07-16-2001, 01:12 AM

What up I met you befor at denny's , Who's doing you install? Ask them if they'll give you a deal on two cars,lol

Anthony C.

Imprezha · 07-16-2001, 01:27 AM

Hey what's up anthony. How you doing. Well this guy is a good friend of mine. He's just really knowledable about turbos. He knows hondas inside out and he's getting interested in subarus. If your interested. I'll ask him to hook you up hook you up man.

If anybody wants to hook up then let me know.
Or questions pm me.

Later

Imprezha · 07-16-2001, 01:42 AM

Hey, if every doesn't mind..around how much did everyone's kit cost. Thanks for all your responses guys.

STiTuner · 07-16-2001, 05:53 PM

2 grand so far I got 2 up pipes 2 down pipes 2 turbo (one set was from a deal gone bad got 50% of my money back and got to keep the kit) A bad assed spearco intercooler, Vortech S-FMU (completely adjustable) AVC-R for boost control, Greddy Type S BOV and I still have a few more parts to go. I'm just waitng for one of my turbos to get back so I can slap it all together. I had it sent out to have it rebuilt. I got a few more bucks going into a fuel pump soon though too. I'll know exactally what everything cost's by the end of the week. Man I can't wait for garrett to give me my turbo back.

Brad

cdigerlando · 07-16-2001, 09:42 PM

How about a meet, say Orlando Ale house in Altamonte. Lunch on Saturday. Anyone game. We could talk at length and make some plans. I would like to talk to this tuner. Where are they located? Do you have a phone number? I am going to Lugo Performance. He has also expressed an interest in tuning Subarus.

Bobalouy · 07-16-2001, 10:36 PM

A meet this saturday sounds good, it seem like there is a few new impreza's to Orlando area. You should probably post something about it in the south east forum, and set an official time.

Anthony C.

latinskllz · 07-16-2001, 10:41 PM

Just let me know the details!!!!!

Peace,
Kevin

P.S. Good lookin out bobalouy

latinskllz · 07-16-2001, 10:47 PM

A business deal with this guy has gone sour, so I am in the market for another tuner to hook it UPPPP!!!

STiTuner · 07-17-2001, 12:47 AM

WOHO a subie get together and my weekend off

hell yeah and its pay day too.. man i can't ask for much more. Please PM me the details. is the ALE house off of 436.. or am i thinking of something else?

Brad
www.velocityresources.com
maybe we could go talk to Jason (owner) on saturday and see if we could get a group buy.

Imprezha · 07-17-2001, 01:04 AM

Hey that sounds good. If you guys want I'll see if my friend can meet up with you guys. He wouldn't
mind selling and installing turbo kits for you guys. If anybody wanted to go extreme with their turbo setup, He knows what's the best route.
pm me if any of you guys want to meet.

Imprezha · 07-17-2001, 01:14 AM

I'll try to get my friend to come and meet up.
So is saturday going to be the official day to meet? Man this forum kicks @ss!

Bobalouy · 07-17-2001, 01:14 AM

Ok Im going to make a post in the south east forum, I would prefer we goto the ale house on 436 and university because I live across the street, and thats the only one I know of.

Anthony C.

cdigerlando · 07-17-2001, 08:45 PM

I was referring to the ale house on 436 near the altamonte mall. I don't really care which one we go to. What's the matter? Afraid of a little road trip? How about 12 pm. Lunch. I will wear my blue WRX shirt so you can't miss me.

cdigerlando · 07-17-2001, 08:49 PM

I just posted a meet for the SE forum for the altamonte springs Alehouse at 12 on saturday. Be there or be square.

07-15-2001, 04:41 PM	#1
Imprezha Scooby Specialist Member#: 6818 Join Date: May 2001 Location: Fort Myers Vehicle: 2004 STI WRB 2010 Gen Coupe, 1995 NSX	Yes! Getting a custom turbo setup in Orlando for 2.5 RS Im getting a custom turbo built in Orlando. which turbo,gauges,and fuel regulators or whatever the fuel parts they are should I use for the impreza 2.5 RS. Im getting all the piping done custom in stainless steel. Help would be appreciated. * Registered users of the site do not see these ads.

07-15-2001, 09:27 PM	#4
cdigerlando Scooby Specialist Member#: 6070 Join Date: Apr 2001 Chapter/Region: South East Location: Longwood, FL Vehicle: 9202 SVX, WRX 92 Sil/Blk, 02 Sil	Let me know where you are going I took my SVX to Lugo performance. I already turbocharged it with a kit I got from forced air technologies. They also sell RS kits. I am having them do engine managment for me (tech II). I live in Longwood. Finding someone willing to work on a subaru was difficult. I also own a WRX. Write me.

07-16-2001, 09:42 PM	#10
cdigerlando Scooby Specialist Member#: 6070 Join Date: Apr 2001 Chapter/Region: South East Location: Longwood, FL Vehicle: 9202 SVX, WRX 92 Sil/Blk, 02 Sil	Lets meet! How about a meet, say Orlando Ale house in Altamonte. Lunch on Saturday. Anyone game. We could talk at length and make some plans. I would like to talk to this tuner. Where are they located? Do you have a phone number? I am going to Lugo Performance. He has also expressed an interest in tuning Subarus.

07-16-2001, 10:41 PM	#12
latinskllz Scooby Specialist Member#: 3461 Join Date: Jan 2001 Chapter/Region: South East Location: orlando, fl, USA Vehicle: 1998 BMW M3 Coupe Estoril Bleau	I'm there! Just let me know the details!!!!! Peace, Kevin P.S. Good lookin out bobalouy

07-16-2001, 10:47 PM	#13
latinskllz Scooby Specialist Member#: 3461 Join Date: Jan 2001 Chapter/Region: South East Location: orlando, fl, USA Vehicle: 1998 BMW M3 Coupe Estoril Bleau	By the way, I am too looking for a custom setup A business deal with this guy has gone sour, so I am in the market for another tuner to hook it UPPPP!!!

07-15-2001, 06:51 PM	#2
STiTuner Scooby Specialist Member#: 5778 Join Date: Apr 2001 Chapter/Region: South East Vehicle: 09 135i Jet Black	Hey who in orlando is doing yoru setup? I went to Velocity resources but they wanted a crap load of money. more then any other kit woulda cost me. infact I coulda fedex'd my car to rallispec to have them do it for cheaper Anyway I went with a vortec S-FMU cost about 300 but its completly adjustable for idle vacum and boost. GET a Fuel pressure gauge though deffinatly if you're going to tune that way. and depending on what kinda of boost you plan on running I'ld get larger injectors and a fuel pump are necessary I'm going to run mine stock for the first few weeks before I turn up the boost and add RC's Please PM me on the details of your kit we might be able to collaborate a bit on this together. I'm in orlando as well and I got a subie techinican from a certain dealer (I'll width hold the name of it for now) helping me with the install Good Luck Brad

07-15-2001, 07:38 PM	#3
8Complex Moderator Member#: 922 Join Date: Feb 2000 Chapter/Region: MWSOC Location: Schaumburg, IL Vehicle: 04 FXT Red	Isn't Deltona near Orlando? Ludespeed is located right there... give him a shout - <a href="mailto:ludicrous2_0@yahoo.com">ludicrous2_0@ yahoo.com</a>

07-15-2001, 10:54 PM	#5
jdm Scooby Newbie Member#: 5555 Join Date: Apr 2001 Location: Orlando,FL	Yeah I'm in the Orlando area too. I'm looking for a performance shop familiar with Subarus. Just ordered the PE 1818 from Dan and I'm seriously considering going TECII. I also need advice on whether forged rods and pistons would be needed with a power output of around 350-400hp. At this point nothing's definite.

07-16-2001, 01:12 AM	#6
Bobalouy Scooby Specialist Member#: 827 Join Date: Jan 2000 Chapter/Region: MAIC Location: Bel Air, MD,USA Vehicle: 99 2.5rs,BDP, 02 WRX wagon WRB	What up I met you befor at denny's , Who's doing you install? Ask them if they'll give you a deal on two cars,lol Anthony C.

07-16-2001, 01:27 AM	#7
Imprezha Scooby Specialist Member#: 6818 Join Date: May 2001 Location: Fort Myers Vehicle: 2004 STI WRB 2010 Gen Coupe, 1995 NSX	Hey what's up anthony. How you doing. Well this guy is a good friend of mine. He's just really knowledable about turbos. He knows hondas inside out and he's getting interested in subarus. If your interested. I'll ask him to hook you up hook you up man. If anybody wants to hook up then let me know. Or questions pm me. Later

07-16-2001, 01:42 AM	#8
Imprezha Scooby Specialist Member#: 6818 Join Date: May 2001 Location: Fort Myers Vehicle: 2004 STI WRB 2010 Gen Coupe, 1995 NSX	Hey, if every doesn't mind..around how much did everyone's kit cost. Thanks for all your responses guys.

07-16-2001, 05:53 PM	#9
STiTuner Scooby Specialist Member#: 5778 Join Date: Apr 2001 Chapter/Region: South East Vehicle: 09 135i Jet Black	2 grand so far I got 2 up pipes 2 down pipes 2 turbo (one set was from a deal gone bad got 50% of my money back and got to keep the kit) A bad assed spearco intercooler, Vortech S-FMU (completely adjustable) AVC-R for boost control, Greddy Type S BOV and I still have a few more parts to go. I'm just waitng for one of my turbos to get back so I can slap it all together. I had it sent out to have it rebuilt. I got a few more bucks going into a fuel pump soon though too. I'll know exactally what everything cost's by the end of the week. Man I can't wait for garrett to give me my turbo back. Brad

07-16-2001, 10:36 PM	#11
Bobalouy Scooby Specialist Member#: 827 Join Date: Jan 2000 Chapter/Region: MAIC Location: Bel Air, MD,USA Vehicle: 99 2.5rs,BDP, 02 WRX wagon WRB	A meet this saturday sounds good, it seem like there is a few new impreza's to Orlando area. You should probably post something about it in the south east forum, and set an official time. Anthony C.

07-17-2001, 12:47 AM	#14
STiTuner Scooby Specialist Member#: 5778 Join Date: Apr 2001 Chapter/Region: South East Vehicle: 09 135i Jet Black	WOHO a subie get together and my weekend off hell yeah and its pay day too.. man i can't ask for much more. Please PM me the details. is the ALE house off of 436.. or am i thinking of something else? Brad www.velocityresources.com maybe we could go talk to Jason (owner) on saturday and see if we could get a group buy.

07-17-2001, 01:04 AM	#15
Imprezha Scooby Specialist Member#: 6818 Join Date: May 2001 Location: Fort Myers Vehicle: 2004 STI WRB 2010 Gen Coupe, 1995 NSX	Hey that sounds good. If you guys want I'll see if my friend can meet up with you guys. He wouldn't mind selling and installing turbo kits for you guys. If anybody wanted to go extreme with their turbo setup, He knows what's the best route. pm me if any of you guys want to meet.

07-17-2001, 01:14 AM	#16
Imprezha Scooby Specialist Member#: 6818 Join Date: May 2001 Location: Fort Myers Vehicle: 2004 STI WRB 2010 Gen Coupe, 1995 NSX	I'll try to get my friend to come and meet up. So is saturday going to be the official day to meet? Man this forum kicks @ss!

07-17-2001, 08:45 PM	#18
cdigerlando Scooby Specialist Member#: 6070 Join Date: Apr 2001 Chapter/Region: South East Location: Longwood, FL Vehicle: 9202 SVX, WRX 92 Sil/Blk, 02 Sil	Ale house I was referring to the ale house on 436 near the altamonte mall. I don't really care which one we go to. What's the matter? Afraid of a little road trip? How about 12 pm. Lunch. I will wear my blue WRX shirt so you can't miss me.

07-17-2001, 08:49 PM	#19
cdigerlando Scooby Specialist Member#: 6070 Join Date: Apr 2001 Chapter/Region: South East Location: Longwood, FL Vehicle: 9202 SVX, WRX 92 Sil/Blk, 02 Sil	Posted on SE forum I just posted a meet for the SE forum for the altamonte springs Alehouse at 12 on saturday. Be there or be square.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS Hydra EMS for 2.5 RS, setup for turbo with wideband included	boogerwrx	Engine/Power/Exhaust	4	03-31-2008 08:05 PM
custom turbo kit for 2.5 rs motor. 98-2001	drift king	1993 - 2001 Impreza Specific Parts	1	11-16-2007 08:18 PM
Where to get a bolt on turbo for 2.5 RS	crrider125	Private 'Wanted' Classifieds	8	03-05-2006 11:54 AM
turbo kit or supercharger for 2.5 rs	Dan Bessey	General Community	6	01-21-2006 12:50 AM
Turbo and intake opinions for 2.5 rs	2 HOT 4 U	Normally Aspirated with bolt-on Forced Induction Powertrain	3	05-10-2002 08:37 PM