NOOB comp & AP question

line · 04-03-2005, 10:22 PM

Ok I want to start out by saying im having 2 problems with my AP.

1) I have a HP pavilion ze5400 laptop with no 9 pin connector. I wondering what i need to do in order to get the AP to synce with me PC.

2) Im running a Stage 1 93oct map that was on the AP( no idea which version it is) and im not getting above 13psi. I flashed the "stock" base map an i could hit 13.5psi all day.

I think that with fixing the PC synce problem fixed the boost problem will be fix quickly. Any advise or help would be amazing. Thanks!!!

* Registered users of the site do not see these ads.

criz · 04-03-2005, 11:18 PM

dude, just run the STG 1 01 oct HGW and you'll hit those targets!

I did that with my stage 2 map on the sti

line · 04-04-2005, 12:39 AM

Im going to run that map but i need to find out how to have my AP and comp synce to run that map. Anyone have any ideas on how get this to work???

jmolaver · 04-04-2005, 12:54 AM

line if your computer does not have a serial port you may be able to pick up a USB to serial adapter at a local computer shop (compusa, microcenter, etc) and try connecting it that way.

line · 04-04-2005, 01:02 PM

I did try that but the AP doesnt know that the USB device is the AP. I was hoping that someone else on the board has over come this problem before.

jmolaver · 04-04-2005, 02:43 PM

sorry, i don't actually have one, i was just throwing that out as a possibility

i'd email cobb and see if they have any suggestions..

seattle944t · 04-04-2005, 10:15 PM

Quote:

Originally Posted by line

I did try that but the AP doesnt know that the USB device is the AP. I was hoping that someone else on the board has over come this problem before.

The USB device should create a COM port - that is what the accessport and the map manger software is looking for. You need to go into the 'configure communications' in the map manger software and select the new COM port the USB-Serial device creates.

line · 04-05-2005, 01:01 AM

thanks ill have to give it a try again.

04-03-2005, 10:22 PM	#1
line Scooby Specialist Member#: 76189 Join Date: Nov 2004 Chapter/Region: Tri-State Location: NJ Vehicle: WRX: Parking Lot Racer in Training	NOOB comp & AP question Ok I want to start out by saying im having 2 problems with my AP. 1) I have a HP pavilion ze5400 laptop with no 9 pin connector. I wondering what i need to do in order to get the AP to synce with me PC. 2) Im running a Stage 1 93oct map that was on the AP( no idea which version it is) and im not getting above 13psi. I flashed the "stock" base map an i could hit 13.5psi all day. I think that with fixing the PC synce problem fixed the boost problem will be fix quickly. Any advise or help would be amazing. Thanks!!! * Registered users of the site do not see these ads.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
nOOb AP question	betnic	Engine Management & Tuning	1	08-26-2006 12:08 PM
noob AP question about changing map versions	ScoobySnacker	AccessPort	4	08-02-2006 11:53 PM
Yet another noob AP question (groan)	KeyPirate	AccessPort	2	03-22-2006 04:17 PM
Noob AP question about 04' 05' ECU's	M8	Engine Management & Tuning	11	06-19-2005 10:36 PM
Cobb-APS, Vishnu, & TXS questions from noob	Ag.	Newbies & FAQs	2	06-28-2002 04:15 PM

04-03-2005, 11:18 PM	#2
criz Scooby Specialist Member#: 56497 Join Date: Mar 2004 Chapter/Region: Tri-State Location: Langhorne, PA Vehicle: 2008 WRX STi DGM	dude, just run the STG 1 01 oct HGW and you'll hit those targets! I did that with my stage 2 map on the sti

04-04-2005, 12:39 AM	#3
line Scooby Specialist Member#: 76189 Join Date: Nov 2004 Chapter/Region: Tri-State Location: NJ Vehicle: WRX: Parking Lot Racer in Training	Im going to run that map but i need to find out how to have my AP and comp synce to run that map. Anyone have any ideas on how get this to work???

04-04-2005, 12:54 AM	#4
jmolaver Scooby Specialist Member#: 19130 Join Date: May 2002 Chapter/Region: South East Location: Uphill Esses, VIR Vehicle: '01 TTE Miata www.awesom-oracing.com	line if your computer does not have a serial port you may be able to pick up a USB to serial adapter at a local computer shop (compusa, microcenter, etc) and try connecting it that way.

04-04-2005, 01:02 PM	#5
line Scooby Specialist Member#: 76189 Join Date: Nov 2004 Chapter/Region: Tri-State Location: NJ Vehicle: WRX: Parking Lot Racer in Training	I did try that but the AP doesnt know that the USB device is the AP. I was hoping that someone else on the board has over come this problem before.

04-04-2005, 02:43 PM	#6
jmolaver Scooby Specialist Member#: 19130 Join Date: May 2002 Chapter/Region: South East Location: Uphill Esses, VIR Vehicle: '01 TTE Miata www.awesom-oracing.com	sorry, i don't actually have one, i was just throwing that out as a possibility i'd email cobb and see if they have any suggestions..

04-05-2005, 01:01 AM	#8
line Scooby Specialist Member#: 76189 Join Date: Nov 2004 Chapter/Region: Tri-State Location: NJ Vehicle: WRX: Parking Lot Racer in Training	thanks ill have to give it a try again.