|
||||||||||||||||
![]() |
|
|
|||||||




![]() |
|
|
Thread Tools | Display Modes |
|
|
#1 |
|
Scooby Newbie
Member#: 87908
Join Date: May 2005
Location: setauket, NY
Vehicle:2005 Legacy GT Ltd Black |
so far my mods on my 2005 legacy gt limited
Perrin intake Perrin downpipe Perrin top mount intercooler Turbo xs up pipe Unorthidox crank pully Short throw shifter Ecutek at 17psi Full 3 inch exaust Sti pedals Windows r tinted 35% on the doors 20% on the back window Anybody have any suggestions on gauges for the lgt Future mods zilla 20g Turbo Fuel pump 850 Injectors Intake manifold Springs
* Registered users of the site do not see these ads.
Last edited by Legacy05; 07-15-2005 at 12:27 PM. |
|
|
|
|
|
#2 |
|
Scooby Specialist
Member#: 38120
Join Date: Jun 2003
Chapter/Region:
South East
Location: Greenville, SC
Vehicle:1991 Rio Red Legacy Turbo |
My car is a '91 Legacy Turbo.
My mods are: -Legazee coffee cup intake mod -WRX exhaust manifold -WRX KYB GR-2 struts -2.5RS springs -Walbro 255 LPH fuel pump -Autometer sport-comp boost gauge -Pioneer p-6500 headunit -Saab 900 TMIC waiting to be put in I had more plans, but I lost my job, and my current one sucks. I have no $$ for mods right now. When I do get more cash, my plans include: -STi injectors -new, higher pressure FPR (from newer Impreza or Legacy) -Custom FMIC -Larger turbo (probably monster 16G) -LegaECU piggyback EM (still in development, but looks to be awesome) set to higher boost (16-18 PSI) -SS braided brake lines and better pads -'99 2.5RS 6-spoke alloys and stickier tires Those are what I had in mind before I swap the engine into a GM6 Impreza. More suspension mods would be nice...... ![]() Last edited by IronMonkeyL255; 07-08-2005 at 02:41 PM. |
|
|
|
|
|
#3 |
|
Scooby Specialist
Member#: 80074
Join Date: Jan 2005
Chapter/Region:
SWIC
Location: Peoria, AZ
Vehicle:2007 BMW 335i Sapphire Black Metallic |
So far on my 05 Limited
Magnaflow Mufflers/Tips (Exhaust silencer removed) AVO Panel Filter Cobb AP Stage 1 iON Performance Sport Springs WRX Pedals and Dead pedal Kartboy Short Shifter JDM Spats Custom Grounding Kit RockBlocker Full Paint Protection Last edited by LegacyGt05; 06-29-2005 at 11:23 PM. |
|
|
|
|
|
#4 |
|
Scooby Specialist
Member#: 27261
Join Date: Oct 2002
Chapter/Region:
NWIC
Location: Wa
Vehicle:1999 www.prjct1.com I'm Ron Burgundy? |
Modifications:
Power and Engine Dress up- • GP Moto intake • Samco intake hose coupler • Espelir JGT500 exhaust • Speedware custom midpipe • STI Exhaust Hangers • Custom 4 point grounding kit • Greddy oil cap • Blitz high pressure radiator cap • Blitz DCII Engine Timer • Apex-I SAFC II • Throttle body bypass modification • Parallel Fuel Lines • Cusco oil catch can • Ceramic coated intake manifold • Optima Red top Battery • Perrin Lightweight crank pulley • Fully Balanced and blueprinted engine • STI Head gasket • Greddy oil block adapter • Custom Powder coated Engine Pieces • IMP stainless steel fuse box cover Suspension - • Full custom WRX suspension swap • Whiteline 22mm rear sway bar • Perrin solid rear endlinks • Noltec solid front endlinks • H&R lowering springs • KYB AGX 4 way adjustable struts • WRX spring Perches • Whiteline strut tower braces • 18” Centerline RPM wheels powder-coated Black • 225/40/18 Yokohama Parada Spec 2 tires • Brembo slotted rotors • Carbotech Bobcat brake pads • Goodridge stainless steel brake lines • Motul RBF 600 Brake fluid Exterior - • JDM Legacy GT-B side markers • JDM Legacy STI front Grille 1 of 150 made • Tinted taillights • Hella 500 fog lights • Hella Supertones horns • 5% window tint • Customized Outback rear bumper • SPT Rear Differential Skid Plate Interior- • Sparco Ring Steering wheel in black leather • Sparco Hub • Sparco Hub extension • Sparco Grip Pedal set • Sparco Grip Dead Pedal • Recaro Furious Racing seat • Speedware seat bracket • Autometer Gauges (egt, oil pressure, oil temp., a/f, volts) • Interior Steetglow neon (blue) • Custom fit WRX dash pod • JDM/ EDM STI Floor mats • Custom embroidered headrests ICE- • Alpine CDA-7892 head Unit • Alpine type S 6.5’’ two way speakers • Alpine 7.5 inch wide screen monitor • Xtant 1001-DX amp • Xtant 404m amp • JL 12” W6 subwoofer • Rosen DVD player • Monster cable wiring • Compustar Alarm system |
|
|
|
|
|
#5 |
|
Floresbian
Moderator Member#: 470
Join Date: Oct 1999
Chapter/Region:
South East
Location: Riverview, Florida - U.S.A.
Vehicle:2013 BRZ, 2011 Forester, '04 Chev 2500HD |
STi Up-pipe
AVO Panel Filter Motul Synthetic 5W30 Engine Oil JDM Legacy Engine Covers STi Short Shift Kit Motul Synthetic 75W90 Gear Oil (Trans & Diffs) STi Front Strut Tower Brace JDM Legacy Spec-B Front Strut Mounts JDM Bilstien Legacy Spec-B Struts STi Pink Springs (BL Spec-B) Goodridge Braided Brake Lines Motul RBF600 Brake Fluid STi Door Sill Kit WRX/STi Pedal Set Autospeed Dead Pedal Auto-Dimming / Compass Mirror Security Upgrade Sun Visor w/ HomeLink Window Tint JDM Legacy Mud Guards JDM Sport Mesh Grille JDM Trunk Lip Spoiler Prodrive 18"x8" PFF7 Wheels - Bright Flitter 225/40ZR18 Nitto NeoGen Tires |
|
|
|
|
|
#6 |
|
Vendor
Member#: 71938
Join Date: Oct 2004
Location: Tokyo
Vehicle:2004 BL Legacy GT Regal Blue |
Hmmm...
AVO subcom AVO power air intake AVO BOV AVO Exhaust bearings AVO Mufflers AVO Center Pipe STi wheels with RE-01's HKS Performer coilovers AVO End-links AVO Short shift kit AVO Boooost gauge and pod ![]() Cheers, Paul Hansen www.sevenphotos.com www.apexjapan.com www.scoobymag.com |
|
|
|
|
|
#7 |
|
Scooby Guru
Member#: 13617
Join Date: Dec 2001
Chapter/Region:
MWSOC
Location: MN
Vehicle:2001 Legacy GT back to stock is a project too |
current mods:
engine: t3/t04B garret turbo running 11psi on stock NA ej25 ludespeed up/down pipes spearco TMIC wrx injectors w/ injector adapters Brullen 2.5" exhaust supra TT fuel pump Autronic SMC custom wrx ecu tial 38mm wastegate blitz bov Drivetrain: USDM STi 6mt w/ dccd(unhooked) R160 3.9 w/ stock lsd Braking/Suspension: Tein HA coilovers Stoptech 328mm front BBK Interior: black w/ grey insert leather seats Exterior: B4 hood 17x8 gunmetal mb motorsport weapons future mods: EZ30R w/ forged pistons GT42R???? ![]() tial 44mm wastegate tial 50mm BOV APS FMIC custom 3" exhaust custom header custom intake manifold?? haha, lots of plans, so little time and money Ben |
|
|
|
|
|
#8 |
|
NASIOC Supporter
Member#: 161
Join Date: Aug 1999
Chapter/Region:
South East
Location: WNC
Vehicle:06 WRX TR (SGM) 89 MR2 (Ice Blue) |
'91 Legacy Turbo
Current mods: TD05H-16G Turbo @ 10psi 16x7 6-spoke 2.5RS alloys (painted black) w/ 205/50-15 Falken Ziex 512 tires Boost gauge Stuff I've bought, but haven't installed yet: Stromung 2.5" SS turboback exhaust Audi S4 side-mount IC (which I plan to top mount) 1st gen DSM bypass valve (since mine appears to be seized) Scytek Astra 1000RS remote start / keyless system Future Plans: Mildly upgraded suspension (probably WRX takeoffs or similar) Mildly upgraded brakes (Bobcat pads, SS lines, fresh rotors, synth fluid) MBC (the one that is currently still installed in the RX) Some form of intake work 5-speed swap (if this 4EAT doesn't quit acting weird) Upgraded fuel pump Wideband O2 sensor/gauge EGT probe/gauge Shane |
|
|
|
|
|
#9 |
|
Scooby Specialist
Member#: 9853
Join Date: Sep 2001
Chapter/Region:
International
Location: Never miss an opportunity
Vehicle:to keep your mouth shut. |
Currently, I only have a few mods, but as soon as I have this cursed credit card paid off, I plan on getting a LOT more
![]() Currently: BBS RK 17x7's wrapped in Falken GR-B's (225/45/17) iON sport springs Whiteline ALK Whiteline RSB Soon - STi Brembo's & Wheels to cover them KYB GR2's Something to let her breath a little easier. Nothing major until she's paid off, the n it's going to be something to the tune of an EJ257 block, SOHC, heads, GT30R, methanol, and something to support it all. ![]() Last edited by 97legacygt; 03-08-2006 at 07:03 AM. |
|
|
|
|
|
#10 |
|
Scooby Specialist
Member#: 59207
Join Date: Apr 2004
Chapter/Region:
NWIC
Location: Oregon's OC
Vehicle:'05 X was 98 LGTT |
'98 White Gt-t Sedan
Engine Management LinkPlus EMS Plug and Play w/boost control not currently used, and ambient air sensor TurboXS MBC HKS turbo timer Motor EJ22T short block w/oil squiters closed deck Pauter connecting rods Ceramic/molly coated cast pistons ARP head studs JDM V.2 DOHC heads w/~7.8CR STi timing belt OE MY98 intake mainfold + TB Billet fuel rails w/Bocsh 550cc top-feed injectors PVC vent canister SYMS radiator cap HKS filter *UR underdrive pulley *255lph fuel pump Turbo and Exhaust Garrett t3/t4 custom, oil and water cooled, .57 trim and .63a/r (bout 500hp max) running 15-16psi Tial 35mm wastegate routed down stream on DP Greddy Type-S BOV TMIC Spearco core 19*(w)2.5*(d)9*(h) Stock N/A header- Borla couldnt take the pressure/heat 2.25* up-pipe 3*TBE w/3 chamber DynoMax Drivetrain OE WRX 5mt OE WRX clutch SYMS short throw shifter STi motor mounts STi tranny mount RedLine fluid OE WRX flywheel OE WRX diff Brakes and Suspension Koni adjustable strut inserts H&R springs STi strut tops; front and rear SYMS strut tower bars; fr & rr SPO 22mm rear bar w/HD mounts KartBoy rear links Whiteline front links WL ALK WL rack bushings WL rear bushing kit WL rear subframe lock kit STi V.6 4pot brakes DBA Slot Front Rotors w/red stuff pads Slotted rear rotors w/Metal Master pads Stainless brake lines MRT brake booster brace Tires and Wheels Rota Tarmac2 in gunmetal 17*7.5* Perelli Pnero Zero M+S 215/45/17 Internal drive tuner lugs All the rest Body color matched lower molding JDM rear tails (red and clear signals) JDM clear sidemarker lights Molded scoop opened to 38mm Morrette head light conversion Japan aftermarket grill Sparco Grip pedals w/dead pedal Sparco Speed Ball shift nob Sparco 3-point harrness (drivers side) AutoMeter EGT, OP, WT, A/F, and boost gauges JDM v7 STI Front and Back seats JDM front bumper cover IPD Front Skid Plate STI Blue door trim to match seats Coming Soon Yonaka FMIC (in progress) IPD front sway bar An EBC (not sure witch one) |
|
|
|
|
|
#11 |
|
Scooby Specialist
Member#: 42659
Join Date: Sep 2003
Chapter/Region:
MAIC
Location: Williamsport PA/SilvrSprngs MD
Vehicle:92 Legacy turbo5mt All go and no show... |
Here's my mod list for my White '92 Legacy SS 5mt.
Engine/Exhaust: *Removed snorkus * K&N filter *Saab 900 10 channel TMIC *Deadbolt's, Monster TD05H-16G turbo w/black Xtreme ceramic coating on the hot side and normal grey ceramic on the cold. *Walbro 255 fuel pump *Diamond coil pack *VRG3 Engine Control, Phase II FCD *Joe-P MBC set at 14 psi (16-17 psi at the track) *Go Fast Bits underdriven light weight crank pulley *STI Group N engine mounts *CES Racing Systems 3" SS semi-race (catless) turbo-back exhaust with ceramic coated twin dump down pipe (DP03). * CES, Boost Enhancement Plate (BEP). *Supercat straight through 3" resonator. *Supercat straight through 3" muffler w/ 3" straight tip. *Carsound 3" high flow cat. Swap in for emmissions tests. *CES Racing Systems up-pipe and cross-pipe. Drivetrain: *ACT Streetlite Flywheel 13.8 lbs. *SPEC Stage 1 clutch w/2600 lb pressure plate. *STI Group N tranny mount *3.9 rear LSD (on the bench waiting to be installed) Brakes: *Mountain rotors in front. *Bradi rotors in rear (vented). *Can't remeber what pads I put in last. :l Suspension: (on the bench waiting to go in) *STI Group N top mounts *KYB GR2's with Tein springs Wheels/Tires: *Summer: OEM 16" WRX wheels with RE-92's (for now) *Winter: OEM 15" Legacy SS wheels with 4 studded Goodyear Ultra Grips Interior/Gauges/ICE: *Pilot steering wheel *Momo aluminum shift knob (euro subaru edition) *Autometer Phantom Boost gauge 30-0-30 vac/boost *Autometer Phantom EGT gauge (on the bench waiting to go in) *Alpine 7830 CD *Clarion 6.5" all the way around. Exterior: MY02 WRX hood scoop. (on the bench waiting to go in) Project: (rebuilding original EJ22T engine). Future: LegacU EM, FMIC, DOHC heads, bigger injectors, bigger brakes, lots of suspension goodies. |
|
|
|
|
|
#12 |
|
Scooby Specialist
Member#: 25952
Join Date: Oct 2002
Chapter/Region:
NWIC
Location: Under your hood :-)
Vehicle:1995 Impreza Coupe w/ "Extras" :-) |
Engine Management:
Stock WRX Computer Ecutek Reflash Engine: Stock WRX Ej205 STi Pink Injectors VF34 Turbo K&N Typhoon (69-8001 TWR) Perrin Turbo Inlet Perrin Silicone Intercooler Hoses Exhaust: Perrin Downpipe Perrin Catback Modified to Fit Legacy (Added about 6 inches to the midpipe) Custom Exhaust Shields Drivetrain Exedy Stock Replacement Clutch for WRX Frankenstein Transmission: -1999 Legacy GT Gearset -1991 Turbo Legacy Center Diff and Transfer Case -1998 Outback Rear Diff -1999 Legacy GT front diff -2002 WRX Front Case Brakes and Suspension: iON springs (Waiting to be installed) Group N GC8 Strut tops (Waiting to be installed) KYB AGX for GC8 (Waiting for them to be delivered) Front Brake Calipers from STi 22b (Red 4 pots) Stock WRX Rotors Stainless brake lines (Waiting for install) ATE Super Blue Brake Fluid Perrin Rear Sway Bar with Mounts (coming soon) Perrin Front Swaybar (Coming soon) Perrin Swaybar Endlinks (For Front and Rear... Coming soon) Whiteline Rack Bushings (coming soon) Tires and Wheels: Rota Downshift in Gold 17x7.5 BF Goodrich T/A KDW2 225/45/17 Lugs nuts from Subydude Interior and Exterior: JDM rear tails (red and clear signals) JDM Projector Headlights Hella Supertone Horns Shift Knob from 1998 Outback Defi Boost Gauge and Controller (EGT, Oil Press, and Oil temp coming soon) 2005 STI Front Seats 2004 STI Rear Seat GT Front End Conversion (Coming soon... Front Bumper and Grill) ICE: Eclipse 5435 Head Unit JL 450/4 Amp US Amps DE1000x CDT HD-1020 Subs (Two 10" Subs... One in Each Rear corner of Trunk) CDT HD62Z Component Speakers up front CDT EF61's in rear deck |
|
|
|
|
|
#13 |
|
Scooby Specialist
Member#: 59207
Join Date: Apr 2004
Chapter/Region:
NWIC
Location: Oregon's OC
Vehicle:'05 X was 98 LGTT |
SHIZZZZZA we have some kick ass Legacy's runnign around. I need to get Rallitke to post up thier '05 GT which is close to 400hp
|
|
|
|
|
|
#14 |
|
*** Banned ***
Member#: 19221
Join Date: May 2002
Chapter/Region:
South East
Location: Jacksonville, FL
Vehicle:2005 Legacy GT (STi) UR35R/Rotated Intake Mani |
2005 Legacy GT Limited (Atlantic Blue)
Car made 325whp/316ft/lbs torque on only 19psi on 93octane. Will be retuning for higher boost for closer to 400+whp. Mod List: Engine: -STI JDM Version 7 Top Mount Intercooler -STI JDM Version 7 Intake Manifold (w/ adapter for Drive-By-Wire) -GodSpeed 520R Spec Kit -GT30R Rotated Mount (.62 Compressor Housing, .84 Turbine Housing) -GTSpec Modified Exhaust Manifold w/ uppipe -Tial 44mm Wastegate V-Band (15psi spring) -Wastegate Loop Pipe (Dumped Back into Downpipe) -Catless V-Band Flanged 3” Downpipe -3.5” Intake w/ MAF Housing (AEM Type Filter) -Stainless Steel Braided Oil line and Fittings -Power Enterprise 850cc Injectors (Side Feed) -Custom Fabricated Fuel Assembly (Walbro 255lph Pump) -TGV Delete Housings (Ported and Polished w/ bar still in place) -Magnus Motorsports Intake Manifold (waiting to be installed, next week) -Hondata Intake Manifold Gaskets -TurboXS STI UTEC -TurboXS New Type-H BOV -AVO 3” Cat-back exhaust system Suspension: -Endless Zeal Function V6 Coilovers -PolTec Rear Endlinks Exterior: -Rota Tarmac II’s Full Royal Gold (17x7.5”) (225/45R17 Cooper Zeon ZPT) -Stock 17x7” rims with Azenis Sports (225/45/R17) Race Tires -Prodrive Battery Tie Down Interior: -Custom Carbon Fiber Guage Face Plate -Defi 60mm BF Series Red/Red Guages (EGT and Boost) -LegacyWR Aluminum Shift Knob -Custom Short Shifter ![]() ![]() ![]() -Matt More pictures can be found at: http://www.suby-performance.com/pics/ |
|
|
|
|
|
#15 |
|
Scooby Guru
Member#: 13617
Join Date: Dec 2001
Chapter/Region:
MWSOC
Location: MN
Vehicle:2001 Legacy GT back to stock is a project too |
matt, what type of dyno did you do your pulls on? nice numbers.
Ben |
|
|
|
|
|
#16 |
|
*** Banned ***
Member#: 19221
Join Date: May 2002
Chapter/Region:
South East
Location: Jacksonville, FL
Vehicle:2005 Legacy GT (STi) UR35R/Rotated Intake Mani |
DynaPack. Those numbers are only the begining.
![]() -Matt |
|
|
|
|
|
#17 |
|
Scooby Specialist
Member#: 32503
Join Date: Feb 2003
Chapter/Region:
TXIC
Location: Johnson City, TX
Vehicle:2011 Tribeca 1995 Legacy Wagon |
WRX STi EJ257 shortblock
2.5RS EJ25 SOHC heads Forester EJ25 SOHC intake manifold and fuel injectors WRX TD04 Turbo WRX top-mount intercooler WRX complete exhaust WRX front crossmember STi Group N motor mounts STi Group N transmission mount K&N air filter Fidanza 9.5-lb aluminum flywheel Axxis Ultimate kelvar brake pads ATE TYP 200 brake fluid Tinted Windows Apexi S-AFC |
|
|
|
|
|
#18 |
|
Scooby Guru
Member#: 64673
Join Date: Jun 2004
Chapter/Region:
NWIC
Location: portland
Vehicle:1990 Legacy wagon goes 12.387 @ 116.5 |
1990 Wagon, Bought for $300
Engine- Stock NA block Eaton M62 Supercharger Custom 7.25" aluminium crank pulley Custom aluminium alternator pulley 370 cc Nismo(?) injectors Walbro fuel pump Subaru AWIC Magnacor wires No powersteering or AC Forester flywheel 02 RS pressure plate Kennedy 6 puck unsprung carbonic disc Dynoed 152 whp and 160 torque with one plug wire not attached and clogged tank sock. WRX rims and stock Bridgestone tires AGX(?) front struts and (?) new struts in back Turbo Legacy Sedan coils in front Metal master brake pads in back The high $ Raybestos in front Gutted interior Racing stripes 2800 lbs when I take it to the track. ![]() |
|
|
|
|
|
#19 |
|
NASIOC Supporter
Member#: 120
Join Date: Jul 1999
Chapter/Region:
AKIC
Location: Where the Navy sends me...
Vehicle:1997 Legacy 2.5GT QuickSilver Metallic |
'97 Legacy 2.5GT sedan
Drivetrain: - Cobb Stage 1 heads - Cobb Street cams - Injen CAI - MRT header & midpipe - Hi-flow metallic substrate cat - Stromung muffler section - Fidanza aluminum flywheel - Clutchmasters clutch - Apexi S-AFC - STi short shift lever - synthetic fluids throughout - STi engine and tranny mounts Suspension: - Koni inserts - Ground Control coil-over sleeves with 315f/280r springs - Noltec front caster/camber plates - STi rear top mounts - Whiteline "comfort" ALK - Whiteline 20mm front sway bar - Whiteline 18-22mm rear sway bar - Whiteline HD rear sway bar mounts - Whiteline front and rear sway bar endlinks - Powerflex trailing arm bushings (front and rear) - Whiteline rear subframe outrigger bushings (or whatever they're called!) - 1/2 of a set of Whiteline steering rack bushings Brakes: - Brembo WRX front rotors (plain) - stock calipers front and rear - Mintex 1155 pads front and rear (street/auto-x) - various pads front (track) - Goodridge braided SS lines Wheels/tires: - 17x7" BBS RK with 215/45-17 Goodyear Eagle F1GS-D3 (street) - 15x8" Volk TE-37 with 225/45-15 Avon Tech Rs (auto-x/open track) Waiting to be installed: - Poltec lateral links - Poltec front and rear sway bar endlinks - Innovate Tuning LM1 wideband O2 - Powerflex rear diff bushings - other 1/2 of the Whiteline steering rack bushings ![]() Pat Olsen '97 Legacy 2.5GT |
|
|
|
|
|
#20 |
|
Scooby Newbie
Member#: 64898
Join Date: Jun 2004
Chapter/Region:
MAIC
Location: McLeansville, North Carolina
Vehicle:2005 Legacy GT LTD Black |
ShaggyGT,
Very nice car. It looks like you have put alot of work into it. You need to replace those headlights though. That orange is ugly. |
|
|
|
|
|
#21 |
|
Scooby Guru
Member#: 5851
Join Date: Apr 2001
Chapter/Region:
VIC
Location: Vancouver
Vehicle:09 Forester XT + NA Miata |
'01 Legacy Brighton
Brakes: Rear LGT disc conversion FHI front 4-pots Goodridge SS lines Porterfield R4S pads Motul Dot 5.1 Suspension: H&R Springs KYB GR2 shocks Front Whiteline sway bar Rear Whiteline Sway bar Whiteline Anti-lift-kit Cusco front strut tower bar Drivetrain & Engine: STi engine mounts STi Tranny Mount STi short shift kit Home made ganzflow style intake with K&N panel filter Header back custom 2.5" exhaust Used to have headers but no longer....waiting for engine swap so no more engine work. Weight Savings: 138lbs thanks to removal of rear seat, carpeting, panels, sound deadening, spare tire, jack etc. Wheels/Tires '04 STi BBS wheels 17x7.5 painted black with 225/45 Falken Azenis Sport |
|
|
|
|
|
#22 |
|
Scooby Specialist
Member#: 38629
Join Date: Jun 2003
Chapter/Region:
NWIC
Location: Northwest
Vehicle:1999 Legacy GT (STI) White |
1999 Legacy GT
Performance Cobb WRX Cryo front brakes, cobb pads 2000+ Legacy (H6) rear disk upgrade SS brake lines w/ super blue brake fluid Brullen catback Rallitek GPMOTO intake Suspension/tranny Redline tranny fluid Hardened shift bushings Cobb Upgraded tranny mount Cobb adjustable short shifter Whiteline 20mm front swaybar Whiteline adjustible rear (18-22) swaybar Whiteline control springs KYB-GR2 struts SYMS rear strut bar ICE Alpine alarm Alpine 7897 MP3 deck Boston Acoustic Z6 component speakers Boston Acoustic nx67 rear deck speakers 2x Xtant 2200ix amps Diamond Audio 12" sub in custom trunk enclosure with bling neon lights (replacing the spare tire) Optima Red Top battery Monster audio CAPS Monster Cable wires Bling JDM Legacy B4 momo wheel Momo shift knob 20% tint Razo sport pedals Parts I have that need installed Whiteline Heavy Duty rear sway bar brackets Fordanza lightweight flywheel Exedy heavy duty clutch WRX EJ20 motor JDM Fogs Custom grill ![]() ![]() ![]() |
|
|
|
|
|
#23 |
|
Scooby Specialist
Member#: 6120
Join Date: Apr 2001
Location: Tokyo
Vehicle:BE5B AVOed B4-RSK Sorta White |
BE5B RSK, McIntosh spec
![]() Engine: AVO panel filter AVO TMIC Profec Boost controller AVO sub-com ApexJapan ghetto earthing AVO BOV Optima Red Top Upgraded pitch stopper STi engine mounts AVO centre pipe w/sport cat AVO rear box AVO auto water sprayer/multi-meter (USDM STi water tank) KnockLink Walbro fuel pump "by AVO for BE5 Legacy" Fancy engine oil ![]() Handling: Tokico adjustable dampers Eibach springs ALK AVO endlinks Whiteline ARBs (f+r) AVO ARB bushings Cusco rear tower bar OEM D rev side performance bars Prova front lower stiffeners Brakes, wheels, tyres: OEM red 4 pots DBA5000 front rotors DBA slotted rear rotors STi brake lines fancy fluid and pads ![]() WedSports RSSC-5 17x7.5 ET48 Bridgestone S-03PP 215/45-17 Other: Recaro SP Sabelt 4 point harness S401 metal pedals Wheel Skins cover Some small, light shift knob AVO shifter mount bushings Panasonic sat nav/TV OEM leather centre arm rest MD changer (who said it couldn't be done on a McIntosh? )hidden ETC (electronic toll tag) Subaru of Australia B4 mats ![]() C West urethane chin spoiler (custom cracks )proper yellow fog lights + various other bits USDM rear centre "garnish" (says Subaru - not Legacy) Missing: AVO front tower bar <-AWOL after being the guinea pig Latest dyno #s 280ps ATW, 324ps crank, 36.5kg/m torque in 32degree celsius heat. Not bad considering there is a whacky electrical gremlin holding it back, and the dyno is notoriously low... |
|
|
|
|
|
#24 |
|
Scooby Specialist
Member#: 16874
Join Date: Mar 2002
Chapter/Region:
NWIC
Location: Portland, OR
Vehicle:2008 Audi RS 4 01 Subaru LGT Sedan |
1998 Legacy GT wagon
Engine: K&N Panel Filter Mr. Josh Lightweight Pulley Magnacore Plug wires 3-angle valve job/resurfaced heads Borla header Stromung 2.25" resonated midpipe SPT axelback Kartboy Exhaust hangers Injen CAI (to be installed soon) Redline Synth. Tranny Fluid Redline Synth. Diff. Fluid Handling: KYB GR2 struts Whiteline Control Springs Outback 18mm Rear Sway Bar Rota 17" Tarmac Wheels Pirelli PZero Nero M+S 215/45/17 Front Brembo rotors Interior: Kartboy Short Shifter Kartboy Knuckleball shift knob Kartboy hardened bushings WRX pedals WRX front seats Sony XPLOD deck Covered DIN pocket 30%/5% Window Tint Exterior: JDM taillights JDM center garnish Yakima Rack Packline Roof top Fiberglass box JDM sidemarkers (installed soon) Custom Painted White Subaru badge ![]() |
|
|
|
|
|
#25 |
|
Scooby Newbie
Member#: 84281
Join Date: Apr 2005
|
![]() Stock Turbo Perrin Uppipe Perrin Downpipe Perrin TMIC ECU Reflash GP Moto Custom Built Oil Cooler Stop Tech Front BBK Stop Tech Stainless Steel Brake Line Kit GP Moto Coilovers Perrin Front Sway Bar Perrin Rear Sway Bar Perrin Endlinks Greddy Amber Boost Guage Greddy Amber EGT Guage 18" Prodrive P1 Wheels Pirelli PZero Nero M&S Tires 45% Window Tint Momo Steering Wheel Momo Shift Knob COBB Tuning Short Throw Shifter Perrin Gauge Pod JL Audio 400x1 Mono Amp JL Audio 300X4 Amp JL Audio Wires throughout JL Audio 10" W6V2 Subwoofer Focal 165 V Slim Front Speakers and Tweeters Focal 130CA 5-1/4" Rear Speakers Custom box for subwoofer and custom mounts for Amps Last edited by andersoncollectibles; 08-30-2005 at 05:16 AM. |
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Post pics of your lip's on your 06! | NjSTi120 | Member's Car Gallery | 120 | 09-03-2007 02:20 PM |
| whats your favorite mod on your car and why? | al@absolute | General Community | 98 | 11-03-2006 09:10 AM |
| please post your mods on your 05 legacy | SubieSky | Legacy Forum | 14 | 08-04-2005 11:00 PM |
| HOw much have you spent on mods on your cars | beobe99 | Tri-State Area Forum | 69 | 11-15-2002 11:15 AM |
| Comment on intake mod on your WRX | skyline555 | Factory 2.0L Turbo Powertrain | 20 | 06-06-2001 02:09 PM |