Vacuum hoses in 1991/92 Legacy

west_minist · 08-02-2005, 11:33 AM

Hi Guys!

I had to change the caburator head on our legacy which is alomost 300K km.

Also, the timing belt broke after the mechanic didn't change it.

We replaced the engine out of a 92/93 which is a little bit different, but the mechanic that we took the car too is not too subaru savy.

The car is working, but I have to take it to a subaru mechanic now, but what I want to know, do you have any pics of the engine bay or any other pics showing you where the all the vacuum hoses on the carburator and near it goes?

Right now, the auto choke does work.

The car is very difficult to start wehn cold and if restarted when how, it does idle high and come back down like before.

Thanks.

* Registered users of the site do not see these ads.

west_minist · 08-05-2005, 10:26 AM

Bump Bump

Legacy777 · 08-05-2005, 12:47 PM

Do you have a high speed internet connection? None of the US legacies had carburators, however I have some scans of the overseas models with the carburator. If you have a high speed conection, you can just d/l the whole thing. If not, I can separate the engine part for you.

west_minist · 08-05-2005, 06:20 PM

I do have a high speed connection.

Thanks alot

Legacy777 · 08-06-2005, 01:14 PM

http://www.driftquebec.com/legacy/1992_legacy.pdf

west_minist · 08-06-2005, 01:40 PM

Hey!

Thanks very much.

I will look through it now.

west_minist · 08-10-2005, 08:58 PM

Hey Legacy777,

The Subaru Mechanic sorted out all of my vacuum lines.

The other guys just mess it up.

He is suppose to work ont he car tomorrow to adjust the idle and auto choke.

Thanks a lot.

Legacy777 · 08-11-2005, 01:26 PM

cool. Glad you got it squared away.

08-02-2005, 11:33 AM	#1
west_minist Scooby Specialist Member#: 53451 Join Date: Jan 2004 Location: Caribbean Vehicle: 2000 JDM Impreza SRX w/ AVCS Silver	Vacuum hoses in 1991/92 Legacy Hi Guys! I had to change the caburator head on our legacy which is alomost 300K km. Also, the timing belt broke after the mechanic didn't change it. We replaced the engine out of a 92/93 which is a little bit different, but the mechanic that we took the car too is not too subaru savy. The car is working, but I have to take it to a subaru mechanic now, but what I want to know, do you have any pics of the engine bay or any other pics showing you where the all the vacuum hoses on the carburator and near it goes? Right now, the auto choke does work. The car is very difficult to start wehn cold and if restarted when how, it does idle high and come back down like before. Thanks. * Registered users of the site do not see these ads.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
will 02wrx struts and springs fit in a 92 legacy?	wrxburton	Brakes, Steering & Suspension	1	03-10-2007 04:17 PM
WRX strut assemblies in a 92 Legacy wagon	ljaviation	Subaru Conversions	6	03-16-2006 12:19 AM
Source for silicone vacuum hose in Calgary	Airboy	Canada Region Forum	2	07-27-2005 11:17 PM
Lap around Nordschleife in a 92 Legacy	Legacy777	Legacy Forum	15	07-05-2003 06:12 PM
HELP!! T-fitting for tap into vacuum hose in WRX	wrx2k3	Newbies & FAQs	3	06-09-2003 10:49 AM

08-05-2005, 10:26 AM	#2
west_minist Scooby Specialist Member#: 53451 Join Date: Jan 2004 Location: Caribbean Vehicle: 2000 JDM Impreza SRX w/ AVCS Silver	Bump Bump

08-05-2005, 12:47 PM	#3
Legacy777 Scooby Guru Member#: 4800 Join Date: Mar 2001 Chapter/Region: TXIC Location: Houston, Tx Vehicle: 1990 Legacy & 97 OBS AWD 5MT EJ22T AWIC Swap	Do you have a high speed internet connection? None of the US legacies had carburators, however I have some scans of the overseas models with the carburator. If you have a high speed conection, you can just d/l the whole thing. If not, I can separate the engine part for you.

08-05-2005, 06:20 PM	#4
west_minist Scooby Specialist Member#: 53451 Join Date: Jan 2004 Location: Caribbean Vehicle: 2000 JDM Impreza SRX w/ AVCS Silver	I do have a high speed connection. Thanks alot

08-06-2005, 01:14 PM	#5
Legacy777 Scooby Guru Member#: 4800 Join Date: Mar 2001 Chapter/Region: TXIC Location: Houston, Tx Vehicle: 1990 Legacy & 97 OBS AWD 5MT EJ22T AWIC Swap	http://www.driftquebec.com/legacy/1992_legacy.pdf

08-06-2005, 01:40 PM	#6
west_minist Scooby Specialist Member#: 53451 Join Date: Jan 2004 Location: Caribbean Vehicle: 2000 JDM Impreza SRX w/ AVCS Silver	Hey! Thanks very much. I will look through it now.

08-10-2005, 08:58 PM	#7
west_minist Scooby Specialist Member#: 53451 Join Date: Jan 2004 Location: Caribbean Vehicle: 2000 JDM Impreza SRX w/ AVCS Silver	Hey Legacy777, The Subaru Mechanic sorted out all of my vacuum lines. The other guys just mess it up. He is suppose to work ont he car tomorrow to adjust the idle and auto choke. Thanks a lot.

08-11-2005, 01:26 PM	#8
Legacy777 Scooby Guru Member#: 4800 Join Date: Mar 2001 Chapter/Region: TXIC Location: Houston, Tx Vehicle: 1990 Legacy & 97 OBS AWD 5MT EJ22T AWIC Swap	cool. Glad you got it squared away.