Gauging Interest: FP 20G with EWG Uppipe and Tial 38mm WG

303WRX · 08-23-2005, 08:15 PM

Just looking to see if anyone would be interested in buying my current turbo setup. The turbo is a Forced Performance TD06 20G (oil cooled only, ported 7cm housing, 44lb/min compressor) with the internal wastegate welded shut. I bought it new, less than a year ago and it has around 10,000 miles on it. It was off my car about 2 months ago and there was no shaft play. It is on my car now and runs perfectly. The uppipe is a Perrin Gen III that is flanged for a 38mm Tial wastegate. All of the welds are TIG and were done by Joe @ Tarmac-USA. I also have a Tial 38mm wastegate (black) and dump tube (vents to atmosphere) to go along with the turbo. With a good tune, this setup makes awesome power on the EJ205 and has good spoolup. Install is very easy, it all bolts up like stock. I'm looking to get $1300 + shipping. I would also consider reasonable offers. Anyone interested? Pics:

* Registered users of the site do not see these ads.

303WRX · 08-23-2005, 10:02 PM

bump!

KJR · 08-23-2005, 10:48 PM

nice set up

SSFWRX · 08-23-2005, 10:52 PM

I think he's saying it was off for some reason, he inspected it and put it back on.

303WRX · 08-24-2005, 12:02 AM

Quote:

Originally Posted by SSFWRX

I think he's saying it was off for some reason, he inspected it and put it back on.

Correct, I took it off to replace a faulty oil return gasket on the turbo and it is currently on my car.

Tap · 08-24-2005, 12:18 AM

Would the wastegate/dumptube clear a bellmouth downpipe?

303WRX · 08-24-2005, 10:58 AM

Quote:

Originally Posted by Tap

Would the wastegate/dumptube clear a bellmouth downpipe?

Yup, I have an Invidia bellmouth downpipe and it fits perfect. This setup bolts up completley like a stock turbo.

Tap · 08-24-2005, 12:46 PM

PM sent

WrxRonald · 08-24-2005, 01:08 PM

if not sold yet... can i ask...... i'm guessing this won't fit my current setup do to uppipe flanges.... but what is the flange like that meets the header at the beginning of the uppipe?

two bolt holes layed out linearly? i have a GTSpec genII header and matching GTSpec uppipe, designed with 3-bolt triangular connection style.

assume yours is just a two bolt linear, right?

if you had a faulty oil gasket, how did you discover this? was it leaking an excess of oil? was there ever a point where your turbo wasn't getting oil flow properly?

303WRX · 08-24-2005, 02:29 PM

Quote:

Originally Posted by WrxRonald

if not sold yet... can i ask...... i'm guessing this won't fit my current setup do to uppipe flanges.... but what is the flange like that meets the header at the beginning of the uppipe?

two bolt holes layed out linearly? i have a GTSpec genII header and matching GTSpec uppipe, designed with 3-bolt triangular connection style.

assume yours is just a two bolt linear, right?

if you had a faulty oil gasket, how did you discover this? was it leaking an excess of oil? was there ever a point where your turbo wasn't getting oil flow properly?

Yes, it is a two bolt linear flange. No, oil flow was never an issue because it was after the oil had gone through the turbo. The faulty gasket had a small pinch in it which had caused a very slow leak. BTW, I have a turbo timer installed and have always allowed for proper cool down.

303WRX · 08-24-2005, 04:45 PM

bump for pics availabe by e-mail.

303WRX · 08-25-2005, 12:21 AM

night bump!

Rizzo314 · 08-25-2005, 01:30 AM

What size spring does the wastegate have? Is the up-pipe / wastegate available seperately? If so I am interested in it. I am wanting to go external on my Green.

303WRX · 08-25-2005, 04:53 PM

Quote:

Originally Posted by Rizzo314

What size spring does the wastegate have? Is the up-pipe / wastegate available seperately? If so I am interested in it. I am wanting to go external on my Green.

The spring is .5 BAR. No, I am trying to sell this as a whole...sorry.

303WRX · 08-26-2005, 12:17 AM

bump for pics added!

beecha91 · 08-28-2005, 03:04 PM

wanna pm u but your box is full or something

Don-

ilivas · 08-29-2005, 09:51 AM

will you sell just the tial wastegate?

beecha91 · 08-29-2005, 01:00 PM

Quote:

Originally Posted by 303WRX

The spring is .5 BAR. No, I am trying to sell this as a whole...sorry.

Read before you act next time hehe jk

303WRX · 08-30-2005, 05:10 PM

Sorry about my PM box being full, it has been emptied.

ilivas- no, sorry. I am trying to sell this as a complete setup.

bump!

303WRX · 08-31-2005, 11:15 AM

bump!!!!

Works · 10-18-2005, 06:01 PM

you still have this we need to talk pm me

the_colombian · 01-31-2006, 01:34 PM

still have the setup? you have PM.

flwrx · 01-31-2006, 05:16 PM

If you decide to part out, PM me. Interested in tial and uppipe

08-23-2005, 08:15 PM	#1
303WRX Scooby Newbie Member Sales Rating: (4) Member#: 35097 Join Date: Apr 2003 Chapter/Region: RMIC Location: Thornton, CO Vehicle: 2002 WRX Sedan PSM	Gauging Interest: FP 20G with EWG Uppipe and Tial 38mm WG w/pics Just looking to see if anyone would be interested in buying my current turbo setup. The turbo is a Forced Performance TD06 20G (oil cooled only, ported 7cm housing, 44lb/min compressor) with the internal wastegate welded shut. I bought it new, less than a year ago and it has around 10,000 miles on it. It was off my car about 2 months ago and there was no shaft play. It is on my car now and runs perfectly. The uppipe is a Perrin Gen III that is flanged for a 38mm Tial wastegate. All of the welds are TIG and were done by Joe @ Tarmac-USA. I also have a Tial 38mm wastegate (black) and dump tube (vents to atmosphere) to go along with the turbo. With a good tune, this setup makes awesome power on the EJ205 and has good spoolup. Install is very easy, it all bolts up like stock. I'm looking to get $1300 + shipping. I would also consider reasonable offers. Anyone interested? Pics: * Registered users of the site do not see these ads. Last edited by 303WRX; 08-26-2005 at 12:19 AM.

08-23-2005, 10:48 PM	#3
KJR Scooby Specialist Member Sales Rating: (104) Member#: 16879 Join Date: Mar 2002 Chapter/Region: SCIC	nice set up Last edited by KJR; 08-26-2005 at 09:39 AM.

08-24-2005, 01:08 PM	#9
WrxRonald Scooby Newbie Member Sales Rating: (1) Member#: 42408 Join Date: Aug 2003 Location: N.E. OH Vehicle: 1988 2JZ SUPRA w/T61 1993 1JZ RX7 w/GT35r	... if not sold yet... can i ask...... i'm guessing this won't fit my current setup do to uppipe flanges.... but what is the flange like that meets the header at the beginning of the uppipe? two bolt holes layed out linearly? i have a GTSpec genII header and matching GTSpec uppipe, designed with 3-bolt triangular connection style. assume yours is just a two bolt linear, right? if you had a faulty oil gasket, how did you discover this? was it leaking an excess of oil? was there ever a point where your turbo wasn't getting oil flow properly?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTT: grimmspeed ewg uppipe and tial 38mm wastegate for nice no cat uppipe	ted dibiase	Engine/Power/Exhaust	10	08-26-2008 10:29 AM
Helix EWG uppipe and tial 38mm	bgod	Engine/Power/Exhaust	17	02-03-2008 01:30 PM
FS: Helix EWG uppipe & tial 38mm wg	Dizzuque	MAIC Private Classifieds	16	01-29-2008 09:24 AM
WTB: EWG Uppipe and Tial 38mm	ottawarex	Private 'Wanted' Classifieds	2	08-24-2007 12:36 PM
FS: UR uppipe and tial 38mm ewg	scoobyimpreza	SCIC Private Classifieds	1	12-08-2006 10:42 AM

08-23-2005, 10:02 PM	#2
303WRX Scooby Newbie Member Sales Rating: (4) Member#: 35097 Join Date: Apr 2003 Chapter/Region: RMIC Location: Thornton, CO Vehicle: 2002 WRX Sedan PSM	bump!

08-23-2005, 10:52 PM	#4
SSFWRX Scooby Specialist Member Sales Rating: (3) Member#: 31789 Join Date: Jan 2003 Location: Bay Area, CA Vehicle: Now with 100% more V8 Spec C and 6MT	I think he's saying it was off for some reason, he inspected it and put it back on.

08-24-2005, 12:18 AM	#6
Tap NASIOC Supporter Member Sales Rating: (25) Member#: 21893 Join Date: Jul 2002 Chapter/Region: SCIC Location: RPV Vehicle: 2002 WRX w/STi swap PSM	Would the wastegate/dumptube clear a bellmouth downpipe?

08-24-2005, 12:46 PM	#8
Tap NASIOC Supporter Member Sales Rating: (25) Member#: 21893 Join Date: Jul 2002 Chapter/Region: SCIC Location: RPV Vehicle: 2002 WRX w/STi swap PSM	PM sent

08-24-2005, 04:45 PM	#11
303WRX Scooby Newbie Member Sales Rating: (4) Member#: 35097 Join Date: Apr 2003 Chapter/Region: RMIC Location: Thornton, CO Vehicle: 2002 WRX Sedan PSM	bump for pics availabe by e-mail.

08-25-2005, 12:21 AM	#12
303WRX Scooby Newbie Member Sales Rating: (4) Member#: 35097 Join Date: Apr 2003 Chapter/Region: RMIC Location: Thornton, CO Vehicle: 2002 WRX Sedan PSM	night bump!

08-25-2005, 01:30 AM	#13
Rizzo314 Scooby Specialist Member Sales Rating: (23) Member#: 42215 Join Date: Aug 2003 Chapter/Region: MWSOC Location: Indianapolis Vehicle: 2002 WRX being built and going for 10s :evil:	What size spring does the wastegate have? Is the up-pipe / wastegate available seperately? If so I am interested in it. I am wanting to go external on my Green.

08-26-2005, 12:17 AM	#15
303WRX Scooby Newbie Member Sales Rating: (4) Member#: 35097 Join Date: Apr 2003 Chapter/Region: RMIC Location: Thornton, CO Vehicle: 2002 WRX Sedan PSM	bump for pics added!

08-28-2005, 03:04 PM	#16
beecha91 Scooby Specialist Member Sales Rating: (16) Member#: 55009 Join Date: Feb 2004 Chapter/Region: MWSOC Location: Bartlett, IL	wanna pm u but your box is full or something Don-

08-29-2005, 09:51 AM	#17
ilivas Scooby Specialist Member Sales Rating: (0) Member#: 56056 Join Date: Feb 2004 Chapter/Region: South East Location: Hickory, NC Vehicle: 2004 wrx T04R Turbo / 8k rpm 257	will you sell just the tial wastegate?

08-30-2005, 05:10 PM	#19
303WRX Scooby Newbie Member Sales Rating: (4) Member#: 35097 Join Date: Apr 2003 Chapter/Region: RMIC Location: Thornton, CO Vehicle: 2002 WRX Sedan PSM	Sorry about my PM box being full, it has been emptied. ilivas- no, sorry. I am trying to sell this as a complete setup. bump!

08-31-2005, 11:15 AM	#20
303WRX Scooby Newbie Member Sales Rating: (4) Member#: 35097 Join Date: Apr 2003 Chapter/Region: RMIC Location: Thornton, CO Vehicle: 2002 WRX Sedan PSM	bump!!!!

10-18-2005, 06:01 PM	#21
Works Scooby Specialist Member Sales Rating: (4) Member#: 32339 Join Date: Jan 2003 Chapter/Region: Tri-State Location: Philadelphia, PA Vehicle: 02 WRX 325whp / 300wtq	you still have this we need to talk pm me

01-31-2006, 01:34 PM	#22
the_colombian Scooby Specialist Member Sales Rating: (2) Member#: 84912 Join Date: Apr 2005 Chapter/Region: SCIC Location: San Diego Vehicle: 2003 2.5L bugeye now with 6 spd 20g!	still have the setup? you have PM.

01-31-2006, 05:16 PM	#23
flwrx Scooby Specialist Member Sales Rating: (31) Member#: 35944 Join Date: Apr 2003 Chapter/Region: South East Location: west palm Vehicle: '03 6MT WRX MBP	If you decide to part out, PM me. Interested in tial and uppipe